Product Details
This Whiteline Front Sway Bar Link fits the 1996-2001 Nissan Pathfinder XE (R50). Position: front. Application note: Adjustable Extra Heavy Duty. Whiteline part number: KLC180-195. The kit contains 2 links.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. It does not require a wheel alignment. Other Whiteline parts we list for the Pathfinder: 14mm Adjustable Front Camber Bolts, Front Control Arm Lower Inner Rear Bushing, and Front Sway Bar Link Bushing (28.5mm OD).
Features
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
- Install guide: Whiteline packs an install guide with it.
- Construction: Made from strong, light alloy.
Specifications
| Part Number | KLC180-195 |
| Part Name | Sway Bar Link |
| Vehicle | 1996-2001 Nissan Pathfinder XE |
| Drivetrain | RWD/4WD |
| Chassis Code | R50 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 190-215 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 190-215mm. Bolt Diameter 12mm. |


