Product Details
This Whiteline Front Lower Control Arm Inner Rear Bushing Kit - Double Offset fits the 2008-2013 Nissan Maxima (A34/A35). The part number is KCA548. Chassis code: A35. You receive 2 shell bushings. It goes on the front of the vehicle.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 1.5 hours. Plan on a wheel alignment afterward.
Features
- Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Install guide: Step-by-step installation instructions come with it.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
Specifications
| Part Number | KCA548 |
| Part Name | Control Arm Bushings |
| Vehicle | 2008-2013 Nissan Maxima |
| Chassis Code | A34/A35 |
| Bushing Color | Black |
| Bushing Height | 75 mm |
| Bushing Inside Diameter | 14.3 mm |
| Bushing Material | Polyurethane |
| Bushing Outside Diameter | 72.1 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1.5 |
| Kit Contents | 2 Shell Bushings |
| Wheel Alignment Required | Yes |
| Notes | - |


