Product Details
This Whiteline Front Lower Inner Control Arm Bushing fits the 2005-2015 Nissan Xterra S (N50). In the box: 4 shell bushings, 4 tubes, and 8 washers. Application note: Standard Replacement. Placement: front. Order it as part number W53272.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 4 hours. Get the car aligned once it is back on the ground. We also list Front Sway Bar Link Assembly, Rear Essential Vehicle Kit, and Front Upper Control Arm Set - Fixed Offset for the Xterra.
Features
- Install guide: Step-by-step installation instructions come with it.
- Finish: A powder coated finish resists corrosion and wear.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Material: Built from polyurethane.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Bonded design: The bushing is bonded for strength where loads are highest.
Specifications
| Part Number | W53272 |
| Part Name | Control Arm Bushing |
| Vehicle | 2005-2015 Nissan Xterra S |
| Drivetrain | RWD/4WD |
| Chassis Code | N50 |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 43 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 4 |
| Kit Contents | 4 Shell Bushings, 4 Tubes, 8 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |


