Product Details
This Whiteline Front Lower Inner Control Arm Bushing fits the 1998-2003 Nissan Frontier Base, SE (D22). Position: front. In the box: 4 bushings and 2 tubes. Part number W71645.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 3 hours. Get the car aligned once it is back on the ground. We also list Front Sway Bar Washer Kit, Front Sway Bar Link Bushing (28.5mm OD), and Rear Sway Bar Link Bushing (28.5mm OD) for the Frontier.
Features
- Easy to fit: Designed so the install needs no specialized skills or tools.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Material: Polyurethane construction.
Specifications
| Part Number | W71645 |
| Part Name | Control Arm Bushing |
| Vehicle | 1998-2003 Nissan Frontier Base, SE |
| Chassis Code | D22 |
| Drivetrain | 4WD/RWD |
| Bushing 1 Inner Diameter | 18.2 mm |
| Bushing 1 Outer Diameter | 41.3 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



