Product Details
These Whiteline 12mm Adjustable Front Camber Bolts fit the 2006 Hyundai Elantra Limited (XD). Position: front. The kit contains 2 bolts. Whiteline part number: KCA412. Whiteline's note for this fit: Adds +/- 0.75 degrees Camber.
Alignment problems often come down to one angle the factory settings cannot reach. After a car is lowered, fitted with different wheels, or simply gets older, camber can drift outside the range a shop is able to correct. These bolts swap in for the originals and give the technician the extra movement needed.
Expect a difficult job of about 1 hour. Get the car aligned once it is back on the ground. To go with it on the Elantra, see Front Control Arm Lower Inner Rear Bushing and Rear Suspension Trailing Arm Bushing.
Features
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Install guide: An install guide comes in the box.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Locking washer: The teeth on the lock washer keep the bolt from turning once it is tightened.
- Hardware: The matching nuts are included.
Specifications
| Part Number | KCA412 |
| Part Name | Camber Bolt |
| Vehicle | 2006 Hyundai Elantra Limited |
| Chassis Code | XD |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |