Product Details
These Whiteline 14mm Adjustable Front Camber Bolts fit the 2000-2005 Subaru Outback Limited (BE/BH/BP). Application note: Adds +/- 0.75 degrees Camber. It goes on the front of the vehicle. You receive 2 bolts. Whiteline part number: KCA414.
Alignment problems often come down to one angle the factory settings cannot reach. After a car is lowered, fitted with different wheels, or simply gets older, camber can drift outside the range a shop is able to correct. These bolts swap in for the originals and give the technician the extra movement needed.
Expect a difficult job of about 1 hour. Plan on a wheel alignment afterward. Other Whiteline parts we list for the Outback: Adjustable Rear Sway Bar Link, Front and Rear Sway Bar Kit, and Front Steering Rack And Pinion Mount Bushing.
Features
- Install guide: Instructions for fitting are packed in the box.
- Locking washer: A toothed lock washer secures the adjustment.
- Hardware: The matching nuts are included.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
Specifications
| Part Number | KCA414 |
| Part Name | Camber Bolt |
| Vehicle | 2000-2005 Subaru Outback Limited |
| Drivetrain | AWD |
| Chassis Code | BE/BH/BP |
| Adjustable | Yes |
| Bolt Thread Diameter | 14 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |