Product Details
These Whiteline 12mm Adjustable Front Camber Bolts fit the 1991-1995 Toyota MR2 Turbo (SW20). Whiteline's note for this fit: Adds +/- 0.75 degrees Camber. The part number is KCA412. In the box: 2 bolts. Placement: front.
Camber is how far the top of the wheel leans in or out when you look at the car from the front, and it decides how the tire meets the road. Many cars leave little or no room to change it at the factory. A camber bolt replaces a standard mounting bolt with an adjustable one, so an alignment shop can move the setting into a better range.
Installation is rated difficult, with about 1 hour of work listed. An alignment is required after installation. Other Whiteline parts we list for the Toyota MR2: Front and Rear Sway Bar Vehicle Kit, Rear Sway Bar Link Bushing (28.5mm OD), and 20mm Rear Sway Bar Mount Bushing Kit.
Features
- Locking washer: The teeth on the lock washer keep the bolt from turning once it is tightened.
- Hardware: The matching nuts are included.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Install guide: Step-by-step installation instructions come with it.
- Camber adjustment: Designed to optimize camber alignment and offset the effect of body roll and tire roll in corners.
Specifications
| Part Number | KCA412 |
| Part Name | Camber Bolt |
| Vehicle | 1991-1995 Toyota MR2 Turbo |
| Chassis Code | SW20 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |