Whiteline 12mm Adjustable Front Camber Bolts for 1988-1992 Mazda MX-6 GT, LX (GD) KCA412
Whiteline Front Camber Adjusting Bolt - 1988-1992 Mazda MX-6 GT, LX KCA412
Whiteline Front Camber Adjusting Bolt - 1988-1992 Mazda MX-6 GT, LX KCA412

Whiteline

|

SKU: KCA412

Whiteline 12mm Adjustable Front Camber Bolts for 1988-1992 Mazda MX-6 GT, LX (GD)

$47.59

MSRP $52.88 You save $5.29

Ask a question
In stock, ready to ship

Authorized DealerGenuine parts & warranty
20+ Years in BusinessTrusted since 2005
Free USA ShippingOn orders $250+
Best Price GuaranteeWe’ll match or beat it
Fitment Notes

All fitment information on our website is provided by the manufacturer. It is the customer's responsibility to thoroughly read the product description and confirm fitment before placing an order and proceeding with installation.

Unless specified otherwise, all suspension products are designed for 2WD vehicles only. Any notes or descriptions related to electronic damping systems (EDC, DDS, etc.) apply strictly to vehicle fitment. Aftermarket coilovers are not compatible with OEM electronic damping control systems unless explicitly stated.

*Product images may not represent the actual SKU.

Handling Time

All handling times are estimates and may change at any time.

  • In-Stock: 1 business day
  • Out of Stock: 3-4 weeks
30-Day Returns

Not quite right? No problem — we offer hassle-free 30-day returns on eligible items. A few exclusions apply.

More Information

Lifetime Manufacturer Warranty

All Whiteline products, except those listed below, are covered by a lifetime warranty against manufacturing defects in material and workmanship, valid for the original vehicle the product was installed on.

Whiteline Ball Joints, Tie Rod Ends, Bearings, Links and Springs are covered for 3 years or 60,000 km (36,000 miles), whichever comes first.

Exclusions
The warranty does not cover:

  • Incorrect installation or misuse.
  • Modification or alteration of parts.
  • Damage due to competition, motorsport, or off-road use.
  • Wear and tear from normal use.
  • Accidental or collision damage.

More Information

Product Details

These Whiteline 12mm Adjustable Front Camber Bolts fit the 1988-1992 Mazda MX-6 GT, LX (GD). Order it as part number KCA412. Whiteline's note for this fit: Adds +/- 0.75 degrees Camber. Position: front. In the box: 2 bolts.

These bolts are a simple way to get adjustment where the factory provided none. They bolt in where a standard fastener sits, and once the alignment is set a toothed lock washer keeps it from creeping, so the angle stays where the shop left it.

Installation is rated difficult, with about 1 hour of work listed. An alignment is required after installation. To go with it on the MX-6, see Front Strut Tower Brace Quick Release Kit and Front Sway Bar Link Bushing (21mm OD).

Features

  • Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
  • Corrosion protection: Plated finish keeps rust off the hardware.
  • Install guide: Step-by-step installation instructions come with it.
  • Locking washer: The teeth on the lock washer keep the bolt from turning once it is tightened.
  • Hardware: The matching nuts are included.
Specifications
Part Number KCA412
Part Name Camber Bolt
Vehicle 1988-1992 Mazda MX-6 GT, LX
Chassis Code GD
Adjustable Yes
Bolt Thread Diameter 12 mm
Color Gray
Installation Difficulty Difficult
Installation Time (hrs) 1
Kit Contents 2 Bolts
Nut Included Yes
Vehicle Placement Front
Wheel Alignment Required Yes
Notes Adds +/- 0.75 Degree Camber

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
1988MazdaMX-6FWDAdds +/- 0.75 Degree Camber
1989MazdaMX-6FWDAdds +/- 0.75 Degree Camber
1990MazdaMX-6FWDAdds +/- 0.75 Degree Camber
1991MazdaMX-6FWDAdds +/- 0.75 Degree Camber
1992MazdaMX-6FWDAdds +/- 0.75 Degree Camber

Customer Reviews

Questions & Answers