Product Details
These Whiteline 12mm Adjustable Front Camber Bolts fit the 1985-1989 Toyota MR2 GT (AW11). The part number is KCA412. It goes on the front of the vehicle. Application note: Adds +/- 0.75 degrees Camber. You receive 2 bolts.
Alignment problems often come down to one angle the factory settings cannot reach. After a car is lowered, fitted with different wheels, or simply gets older, camber can drift outside the range a shop is able to correct. These bolts swap in for the originals and give the technician the extra movement needed.
Whiteline rates the install as difficult and lists about 1 hour. Plan on a wheel alignment afterward. We also list Rear Sway Bar Link Bushing (28.5mm OD) and 18mm Rear Sway Bar Bushing Kit for the Toyota MR2.
Features
- Hardware: The matching nuts are included.
- Camber adjustment: Aims to keep camber in an effective range as the body rolls.
- Install guide: Step-by-step installation instructions come with it.
- Locking washer: The teeth on the lock washer keep the bolt from turning once it is tightened.
- Corrosion protection: Plated finish keeps rust off the hardware.
Specifications
| Part Number | KCA412 |
| Part Name | Camber Bolt |
| Vehicle | 1985-1989 Toyota MR2 GT |
| Chassis Code | AW11 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |