Whiteline 12mm Adjustable Front Camber Bolts for 1984-1994 Nissan Sentra SE, XE (B11/B12/B13) KCA412
Whiteline Front Camber Adjusting Bolt - 1984-1994 Nissan Sentra SE, XE KCA412
Whiteline Front Camber Adjusting Bolt - 1984-1994 Nissan Sentra SE, XE KCA412

Whiteline

|

SKU: KCA412

Whiteline 12mm Adjustable Front Camber Bolts for 1984-1994 Nissan Sentra SE, XE (B11/B12/B13)

$47.59

MSRP $52.88 You save $5.29

Ask a question
In stock, ready to ship

Authorized DealerGenuine parts & warranty
20+ Years in BusinessTrusted since 2005
Free USA ShippingOn orders $250+
Best Price GuaranteeWe’ll match or beat it
Fitment Notes

All fitment information on our website is provided by the manufacturer. It is the customer's responsibility to thoroughly read the product description and confirm fitment before placing an order and proceeding with installation.

Unless specified otherwise, all suspension products are designed for 2WD vehicles only. Any notes or descriptions related to electronic damping systems (EDC, DDS, etc.) apply strictly to vehicle fitment. Aftermarket coilovers are not compatible with OEM electronic damping control systems unless explicitly stated.

*Product images may not represent the actual SKU.

Handling Time

All handling times are estimates and may change at any time.

  • In-Stock: 1 business day
  • Out of Stock: 3-4 weeks
30-Day Returns

Not quite right? No problem — we offer hassle-free 30-day returns on eligible items. A few exclusions apply.

More Information

Lifetime Manufacturer Warranty

All Whiteline products, except those listed below, are covered by a lifetime warranty against manufacturing defects in material and workmanship, valid for the original vehicle the product was installed on.

Whiteline Ball Joints, Tie Rod Ends, Bearings, Links and Springs are covered for 3 years or 60,000 km (36,000 miles), whichever comes first.

Exclusions
The warranty does not cover:

  • Incorrect installation or misuse.
  • Modification or alteration of parts.
  • Damage due to competition, motorsport, or off-road use.
  • Wear and tear from normal use.
  • Accidental or collision damage.

More Information

Product Details

These Whiteline 12mm Adjustable Front Camber Bolts fit the 1984-1994 Nissan Sentra SE, XE (B11/B12/B13). Included: 2 bolts. Part number KCA412. Whiteline's note for this fit: Adds +/- 0.75 degrees Camber. Placement: front.

Alignment problems often come down to one angle the factory settings cannot reach. After a car is lowered, fitted with different wheels, or simply gets older, camber can drift outside the range a shop is able to correct. These bolts swap in for the originals and give the technician the extra movement needed.

Installation is rated difficult, with about 1 hour of work listed. An alignment is required after installation. We also list Front Strut Tower Brace, Front Sway Bar Washer Kit, and Front Strut Tower Brace Quick Release Kit for the Sentra.

Features

  • Corrosion protection: Metal parts are plated to resist rust over the long term.
  • Camber adjustment: Designed to optimize camber alignment and offset the effect of body roll and tire roll in corners.
  • Locking washer: A toothed lock washer secures the adjustment.
  • Hardware: The matching nuts are included.
  • Install guide: An install guide comes in the box.
Specifications
Part Number KCA412
Part Name Camber Bolt
Vehicle 1984-1994 Nissan Sentra SE, XE
Chassis Code B11/B12/B13
Adjustable Yes
Bolt Thread Diameter 12 mm
Color Gray
Installation Difficulty Difficult
Installation Time (hrs) 1
Kit Contents 2 Bolts
Nut Included Yes
Vehicle Placement Front
Wheel Alignment Required Yes
Notes Adds +/- 0.75 Degree Camber

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelNotes
1984NissanSentraAdds +/- 0.75 Degree Camber
1985NissanSentraAdds +/- 0.75 Degree Camber
1986NissanSentraAdds +/- 0.75 Degree Camber
1987NissanSentraAdds +/- 0.75 Degree Camber
1988NissanSentraAdds +/- 0.75 Degree Camber
1989NissanSentraAdds +/- 0.75 Degree Camber
1990NissanSentraAdds +/- 0.75 Degree Camber
1991NissanSentraAdds +/- 0.75 Degree Camber
1992NissanSentraAdds +/- 0.75 Degree Camber
1993NissanSentraAdds +/- 0.75 Degree Camber
1994NissanSentraAdds +/- 0.75 Degree Camber

Customer Reviews

Questions & Answers