Product Details
These Whiteline 12mm Adjustable Front Camber Bolts fit the 1983-1985 Nissan Pulsar NX Base (N12). Position: front. Application note: Adds +/- 0.75 degrees Camber. Part number KCA412. You receive 2 bolts.
Camber is how far the top of the wheel leans in or out when you look at the car from the front, and it decides how the tire meets the road. Many cars leave little or no room to change it at the factory. A camber bolt replaces a standard mounting bolt with an adjustable one, so an alignment shop can move the setting into a better range.
Installation is rated difficult, with about 1 hour of work listed. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Pulsar: Front Sway Bar Washer Kit, Front Sway Bar Link Bushing (21mm OD), and Front Lower Shock Absorber Bushing Kit.
Features
- Camber adjustment: Aims to keep camber in an effective range as the body rolls.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Locking washer: The teeth on the lock washer keep the bolt from turning once it is tightened.
- Hardware: The matching nuts are included.
- Install guide: Whiteline packs an install guide with it.
Specifications
| Part Number | KCA412 |
| Part Name | Camber Bolt |
| Vehicle | 1983-1985 Nissan Pulsar NX Base |
| Chassis Code | N12 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |