Product Details
This Whiteline Adjustable Rear Sway Bar Link fits the 2011-2019 Volkswagen Beetle Base (A5). The kit contains 2 links. Whiteline's note for this fit: Suits models with control arm link mount: adjustable extra heavy duty. Placement: rear. Order it as part number KLC141.
The rear sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Installation is rated easy, with about 1 hour of work listed. A wheel alignment is not required. To go with it on the Beetle, see Adjustable Front Sway Bar Link, Front and Rear Sway Bar Kit, and Front Control Arm Lower Inner Front Bushing.
Features
- Hardware: Also in the box: locking nuts and washers.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Material: Made from steel.
Specifications
| Part Number | KLC141 |
| Part Name | Sway Bar Link |
| Vehicle | 2011-2019 Volkswagen Beetle Base |
| Drivetrain | FWD |
| Chassis Code | A5 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 115-140 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Suits models with control arm link mount - adjustable extra heavy duty. Length 110-135mm |



