Product Details
This Whiteline Adjustable Rear Sway Bar Link fits the 2011-2014 Volkswagen Beetle TDI (A5). Whiteline's note for this fit: Suits models with control arm link mount: adjustable extra heavy duty. This part is for the rear of the vehicle. The kit contains 2 links. Whiteline part number: KLC141.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Whiteline rates the install as easy and lists about 1 hour. It does not require a wheel alignment. To go with it on the Beetle, see Adjustable Front Sway Bar Link, Front and Rear Sway Bar Kit, and Front Control Arm Lower Inner Front Bushing.
Features
- Hardware: The kit includes locking nuts and washers.
- Material: Made from steel.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
Specifications
| Part Number | KLC141 |
| Part Name | Sway Bar Link |
| Vehicle | 2011-2014 Volkswagen Beetle TDI |
| Drivetrain | FWD |
| Chassis Code | A5 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 115-140 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Suits models with control arm link mount - adjustable extra heavy duty. Length 110-135mm |



