Product Details
These Whiteline 14mm Adjustable Front Camber Bolts fit the 2000-2006 Toyota MR2 Spyder (ZZW30). Whiteline part number: KCA414. Position: front. Application note: Adds +/- 0.75 degrees Camber. In the box: 2 bolts.
Camber is how far the top of the wheel leans in or out when you look at the car from the front, and it decides how the tire meets the road. Many cars leave little or no room to change it at the factory. A camber bolt replaces a standard mounting bolt with an adjustable one, so an alignment shop can move the setting into a better range.
Expect a difficult job of about 1 hour. An alignment is required after installation. To go with it on the MR2 Spyder, see Front and Rear Sway Bar Vehicle Kit, Front Sway Bar Link Kit, and Front Control Arm Lower Inner Front Bushing.
Features
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Install guide: Instructions for fitting are packed in the box.
- Hardware: Nuts are supplied with the bolts.
- Locking washer: The toothed lock washer keeps the adjustment from slipping once it is tightened.
- Camber adjustment: Aims to keep camber in an effective range as the body rolls.
Specifications
| Part Number | KCA414 |
| Part Name | Camber Bolt |
| Vehicle | 2000-2006 Toyota MR2 Spyder |
| Chassis Code | ZZW30 |
| Adjustable | Yes |
| Bolt Thread Diameter | 14 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |