Product Details
These Whiteline 12mm Adjustable Front Camber Bolts fit the 1998-2000 Volvo S70 (P80). Whiteline's note for this fit: Adds +/- 0.75 degrees Camber. This part is for the front of the vehicle. The part number is KCA412. The kit contains 2 bolts.
Alignment problems often come down to one angle the factory settings cannot reach. After a car is lowered, fitted with different wheels, or simply gets older, camber can drift outside the range a shop is able to correct. These bolts swap in for the originals and give the technician the extra movement needed.
Expect a difficult job of about 1 hour. Get the car aligned once it is back on the ground.
Features
- Locking washer: The toothed lock washer keeps the adjustment from slipping once it is tightened.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Hardware: The matching nuts are included.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Install guide: Step-by-step installation instructions come with it.
Specifications
| Part Number | KCA412 |
| Part Name | Camber Bolt |
| Vehicle | 1998-2000 Volvo S70 |
| Chassis Code | P80 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |