Product Details
These Whiteline 12mm Adjustable Front Camber Bolts fit the 1987-1995 Mazda 323 Base (BF/BG). Whiteline part number: KCA412. Included: 2 bolts. It goes on the front of the vehicle. Whiteline's note for this fit: Adds +/- 0.75 degrees Camber.
Alignment problems often come down to one angle the factory settings cannot reach. After a car is lowered, fitted with different wheels, or simply gets older, camber can drift outside the range a shop is able to correct. These bolts swap in for the originals and give the technician the extra movement needed.
Expect a difficult job of about 1 hour. Get the car aligned once it is back on the ground. To go with it on the Mazda 323, see Front Control Arm Lower Inner Front Bushing, Front Sway Bar Washer Kit, and Front Strut Tower Brace Quick Release Kit.
Features
- Locking washer: A toothed lock washer secures the adjustment.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Install guide: Step-by-step installation instructions come with it.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Hardware: Nuts are supplied with the bolts.
Specifications
| Part Number | KCA412 |
| Part Name | Camber Bolt |
| Vehicle | 1987-1995 Mazda 323 Base |
| Chassis Code | BF/BG |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |