Product Details
Whiteline lists the Sway Bar Link Kit - 10mm Ball Stud, 60-80mm Length as a universal part. No single vehicle is named on this page. The kit contains 2 links. The part number is KLC140-060. Compare the dimensions in the table below with your application before you order.
The sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Expect a moderate job of about 1 hour. No alignment is needed afterward. Part number KLC140-060: the maker's full details are in the table below.
Features
- Material: Built from steel.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Hardware: Supplied with locking nuts and washers.
- Install guide: An install guide comes in the box.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
Specifications
| Part Number | KLC140-060 |
| Part Name | Sway Bar Links |
| Vehicle | Universal |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 60-80 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Wheel Alignment Required | No |
| Notes | - |