Product Details
This Whiteline Rear Sway Bar Link Kit - 10mm Ball Stud fits the 2014-2016 BMW 428i xDrive. Placement: rear. Whiteline's note for this fit: Adjustable extra heavy duty. You receive 2 links. Order it as part number KLC140-135.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment.
Features
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Easy to fit: Designed for an easy install with ordinary shop equipment.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Hardware: Hardware supplied: locking nuts and washers.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Material: Built from aluminum alloy.
Specifications
| Part Number | KLC140-135 |
| Part Name | Sway Bar Links |
| Vehicle | 2014-2016 BMW 428i xDrive |
| Chassis Code | F32/F33 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 135-160 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 130-155mm. Bolt Diameter 10mm |