Product Details
These MTS Technik Street Series coilovers fit the 2001-2004 BMW 525i (E39). MTS coilovers let you adjust the suspension height to your preference and to road conditions. The firmer suspension makes the car more predictable to drive.
With these MTS E39 525i coilovers you can reset the ride height when you swap between larger summer wheels and smaller winter wheels.
MTS coilovers have a 2-year warranty with no mileage limit.
Standard Features:
- 2-year warranty with no mileage limit.
- Corrosion-resistant components.
- Twin-tube dampers for stable damping.
- Gas pressure on the hydraulic fluid stops the oil from foaming, so the dampers keep working under continuous hard use.
- The thread and its wide adjustment range let you set the ride height precisely.
- A set that provides lowering only the front axle.
- hexaCOIL spring perch for easier height adjustment.
- Shock bodies have a double layer of gold zinc and the adjusters are anodized aluminum, for corrosion resistance.
- Coilover springs made by Eibach.
Product Notes
- When the adjustable spring seat is set too low according the catalogue, all guarantees will be withdrawn.
- Front axle height adjustable (threaded shock absorber housing).
- Not for 4x4.
- Only for vehicles without EDC.
- If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
- During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
- Vehicles equipped with EDC and / or V8 engines will need additional OE parts. FRONT AXLE: dome bearing (BMW part: 31331091709), washer (BMW part: 31331116983), sealing washer (BMW part: 31331110196).
Specifications
| Part Number | MTSGWBM33 |
| Part Name | Street Series Coilovers |
| Vehicle | 2001-2004 BMW 525i |
| Engine | 520i / 523i / 525i / 528i / 530i / 535i / 540i / 520d / 525td / 525d / 525tds / 530d |
| Chassis Code | E39 |
| Notes | Vehicles with EDC or a V8 engine need additional OE parts (not included). |
| Lowering Front Axle | 20 - 70 mm |
| Max Axle Load Front | 1090 kg |
| Camber Plates | Not Included |
| Ride-Height Adjustable | Yes |
| Damping Adjustment | Non-Adjustable |
| Vehicle Placement | Front |
| Additional Information | only versions with NIVO |



