Product Details
These MTS Technik Street Series coilovers fit the 1999-2000 BMW 528i (E39). MTS Technik Coilover Suspension, the perfect choice for drivers who appreciate the flexibility and the ability to adjust the suspension altitudes depending on their preference and road conditions. The firmer suspension makes the car more predictable to drive.
With these MTS E39 528i coilovers you can reset the ride height when you swap between larger summer wheels and smaller winter wheels.
MTS coilovers have a 2-year warranty with no mileage limit.
Standard Features:
- 2-year warranty with no mileage limit.
- Corrosion-resistant components.
- Twin-tube dampers for stable damping.
- Pressurized gas presses the hydraulic fluid, eliminating the 'foaming' effect of the oil (an undesirable and typical phenomenon for oil shock absorbers), which means higher efficiency for continuous, intensive work.
- Specially selected type of thread and a wide range of suspension adjustment allow optimal setting of the car height.
- A set that provides lowering only the front axle.
- hexaCOIL spring perch for easier height adjustment.
- Shock bodies have a double layer of gold zinc and the adjusters are anodized aluminum, for corrosion resistance.
- Coilover springs made by Eibach.
Product Notes
- Not for 4x4.
- Only for vehicles without EDC.
- If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
- During the installation of the suspension set, the clearance between the tire/rim and the suspension strut shall be checked. The minimum allowed gap is 5 mm (0,2 inch). Otherwise, use certificated wheel spacers.
- Vehicles equipped with EDC and / or V8 engines will need additional OE parts. FRONT AXLE: 2x dome bearing (BMW part: 31336752735), 2x washer (BMW part: 31336776760), 2x sealing washer (BMW part: 31331110196). REAR AXLE: 2x supporting bearing (BMW part: 33521091710), 2x supporting pot (BMW part: 33521090282), 2x washer (BMW part: 33521092986).
- For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate, and reinstalling the adjustment on the car.
Specifications
tr>
| Part Number | MTSGWBM35 |
| Part Name | Street Series Coilovers |
| Vehicle | 1999-2000 BMW 528i |
| Engine | 520d / 520i / 523i / 525d / 525i / 525tds / 528i / 530d / 530i / 540i |
| Chassis Code | E39 |
| Notes | Vehicles with EDC or a V8 engine need additional OE parts (not included). |
| Damping Adjustment | Non-Adjustable |
| Ride-Height Adjustable | Yes |
| Lowering Front Axle | 20 - 70 mm |
| Lowering Rear Axle | 10 - 40 mm |
| Max Axle Load Front | 1095 kg |
| Max Axle Load Rear | 1410 kg |
| Camber Plates | Not Included |
| Quantity | Full Set (Front & Rear) |
| Additional Information |