Product Details

These MTS Technik Street Series coilovers fit the 2003-2010 Alfa Romeo GT Coupe (937). The Street Series is the default setup MTS engineers suggest, with a wide range of lowering adjustment. It combines comfort and stiffness for spirited driving that stays usable every day.

MTS coilovers let you adjust the suspension height to your preference and to road conditions. The firmer suspension makes the car more predictable to drive.

With these MTS Alfa Romeo GT coilovers you can reset the ride height when you swap between larger summer wheels and smaller winter wheels.

Standard Features:

  • 2-year warranty with no mileage limit.
  • Corrosion-resistant components.
  • Twin-tube dampers for stable damping.
  • Gas pressure on the hydraulic fluid stops the oil from foaming, so the dampers keep working under continuous hard use.
  • The thread and its wide adjustment range let you set the ride height precisely.
  • hexaCOIL spring perch for easier height adjustment.
  • Shock bodies have a double layer of gold zinc and the adjusters are anodized aluminum, for corrosion resistance.
  • Coilover springs made by Eibach.
Specifications
Part Number XMTSGWAL02
Part Name Street Series Coilovers
Vehicle 2003-2010 Alfa Romeo GT Coupe
Chassis Code 937
Engine 1.8 TS (937CXR1A) Petrol / 1.9 JTD (937CXN1B) Diesel / 1.9 JTD (937CXN1B, 937CXZ1B) Diesel / 2.0 JTS (937CXH11, 937CXH1A, 937CXT1A) Petrol / 2.0 JTS (937CXH1A, 937CXH11) Petrol / 3.2 GTA (937CXP1B) Petrol
Ride-Height Adjustable Yes
Damping Adjustment Non-Adjustable
Series Street
Housing Inox
Lowering Axle - Front 15-75 mm
Lowering Axle - Rear 30-85 mm
Max Axle Load - Front 1060 kg
Max Axle Load - Rear 990 kg
Camber Plates - Front No
Camber Plates - Rear No
Quantity Full Set (Front & Rear)
Notes
  • Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
  • Only for vehicles without NIVO / OEM pneumatic suspension.
  • If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
  • During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0.2 inch). Otherwise use certificated wheel spacers.

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
2003Alfa RomeoGTFWD
2004Alfa RomeoGTFWD
2005Alfa RomeoGTFWD
2006Alfa RomeoGTFWD
2007Alfa RomeoGTFWD
2008Alfa RomeoGTFWD
2009Alfa RomeoGTFWD
2010Alfa RomeoGTFWD

Customer Reviews

Questions & Answers