Product Details

These MTS Technik Street Series coilovers fit the 1994-1995 BMW 850CSi (E31). MTS coilovers let you adjust the suspension height to your preference and to road conditions. The firmer suspension makes the car more predictable to drive.

With these MTS E31 850CSi coilovers you can reset the ride height when you swap between larger summer wheels and smaller winter wheels.

MTS coilovers have a 2-year warranty with no mileage limit.

Standard Features:

  • 2-year warranty with no mileage limit.
  • Corrosion-resistant components.
  • Twin-tube dampers for stable damping.
  • Gas pressure on the hydraulic fluid stops the oil from foaming, so the dampers keep working under continuous hard use.
  • The thread and its wide adjustment range let you set the ride height precisely.
  • Camber plates allow wheel angle adjustment.
  • hexaCOIL spring perch for easier height adjustment.
  • Extra height adjustment at the lower mount changes the drop without changing how the springs work.
  • Shock bodies have a double layer of gold zinc and the adjusters are anodized aluminum, for corrosion resistance.
  • Coilover springs made by Eibach.
Specifications
Part Number MTSGWBM48
Part Name Coilover Kit
UPC 5903855611238
Vehicle 1994-1995 BMW 850CSi
Engine 840Ci / 840i / 850Ci / 850CSi / 850i
Chassis Code E31
Series Street
Housing Gold
Camber / Top Mount Front Axle Yes
Camber / Top Mount Rear Axle No
Coilover Main Spring - Front Spring Rate (84 N/mm)
Coilover Main Spring - Rear Spring Rate (80 N/mm)
Coilover Helper Spring Spring Rate (20 N/mm)
Lowering - Front 25-75 mm
Lowering - Rear 25-75 mm
Max Axle Load - Front 1150 kg
Max Axle Load - Rear 1200 kg
Ride-Height Adjustable Yes
Quantity Full Set (Front & Rear)
Additional Information Strut diameter at the front axle of 55 mm
Notes
  • Only for vehicles without electronic damping.
  • If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
  • During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0.2 inch). Otherwise use certificated wheel spacers.
  • The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.
  • Including M-Technik.

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
1994BMW850CSiRWD
1995BMW850CSiRWD

Customer Reviews

Questions & Answers