MTS Technik Street Series coilovers for the BMW M6

MTS Technik

|

SKU: XMTSGWBM19

MTS Technik Street Series Suspension Coilover Kit for 1987-1988 BMW M6 (E24)

$1,501.78

MSRP $2,169.16 You save $667.38

Ask a question
In stock, ready to ship

Authorized DealerGenuine parts & warranty
20+ Years in BusinessTrusted since 2005
Free USA ShippingOn orders $250+
Best Price GuaranteeWe’ll match or beat it
Fitment Notes

All fitment information on our website is provided by the manufacturer. It is the customer's responsibility to thoroughly read the product description and confirm fitment before placing an order and proceeding with installation.

Unless specified otherwise, all suspension products are designed for 2WD vehicles only. Any notes or descriptions related to electronic damping systems (EDC, DDS, etc.) apply strictly to vehicle fitment. Aftermarket coilovers are not compatible with OEM electronic damping control systems unless explicitly stated.

*Product images may not represent the actual SKU.

Handling Time

All handling times are estimates and may change at any time.

  • In-Stock: 7-10 business days
  • Out of Stock: 2-6 weeks
30-Day Returns

Not quite right? No problem — we offer hassle-free 30-day returns on eligible items. A few exclusions apply.

More Information

2-Year Manufacturer Warranty

MTS Technik products are covered by a two-year warranty, with no mileage limit.

Product Details

These MTS Technik Street Series coilovers fit the 1987-1988 BMW M6 (E24). MTS coilovers let you adjust the suspension height to your preference and to road conditions. The firmer suspension makes the car more predictable to drive. With these MTS E24 M6 coilovers you can reset the ride height when you swap between larger summer wheels and smaller winter wheels.

Standard Features

  • The Street Series is the default setup MTS engineers suggest, with a wide range of lowering and a balance of comfort and stiffness.
Specifications
Part Number XMTSGWBM19
Part Name Street Series Coilovers
Vehicle 1987-1988 BMW M6
Chassis Code E24
Ride-Height Adjustable Yes
Damping Adjustment Non-Adjustable
Series Street
Housing Inox
Camber/Top Mount - Front Axle Yes
Camber/Top Mount - Rear Axle No
Coilover Main Spring - Front Spring Rate (70 N/mm)
Coilover Helper Spring - Front Spring Rate (20 N/mm)
Coilover Main Spring - Rear Spring Rate (60 N/mm)
Coilover Helper Spring - Rear Spring Rate (20 N/mm)
Quantity Full Set (Front & Rear)
Additional Information Strut Diameter at the Front Axle of 55 mm
Notes
  • Front and Rear axle height adjustable (threaded shock absorber housing).
  • If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
  • During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0.2 inch). Otherwise use certificated wheel spacers.
  • Independent height adjustment at the lower brackets on the Front dampers.
  • Set includes 2x upper "camber plates" on the Front axle.
  • The installation requires the use of OE Front struts - they should be cut and welded as described in the attached manual.
  • In some cases additional OE-parts for the installation of the suspension components are required. Those are not included in the set.
  • Including M-Technik.
  • 65 - Suspension compatible only with a Rear top mount with an internal diameter of 78mm - OEM number: 33521117657 or 33521126987. It is possible to mount the suspension to cars equipped with other top mounts, but original parts marked with one of the above numbers will be required.
  • 66 - In the case of cars equipped with Nivo, it will be required to replace the Rear top mounts with OEM: 33521117657 or 33521126987.

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
1987BMWM6RWD
1988BMWM6RWD

Customer Reviews

Questions & Answers