Product Details

These MTS Technik Street Series coilovers fit the 2010-2014 Volkswagen Passat Kombi 4motion (365). MTS coilovers let you adjust the suspension height to your preference and to road conditions. The firmer suspension makes the car more predictable to drive.

With these MTS Volkswagen Passat coilovers you can reset the ride height when you swap between larger summer wheels and smaller winter wheels.

MTS coilovers have a 2-year warranty with no mileage limit.

Standard Features:

  • 2-year warranty with no mileage limit.
  • Corrosion-resistant components.
  • Twin-tube dampers for stable damping.
  • Gas pressure on the hydraulic fluid stops the oil from foaming, so the dampers keep working under continuous hard use.
  • The thread and its wide adjustment range let you set the ride height precisely.
  • hexaCOIL spring perch for easier height adjustment.
  • Shock bodies have a double layer of gold zinc and the adjusters are anodized aluminum, for corrosion resistance.
  • Coilover springs made by Eibach.
Specifications
Part Number MTSGWVW45
Part Name Street Series Coilovers
Vehicle 2010-2014 Volkswagen Passat Kombi 4motion
Engine 2.0 FSI 4motion / 3.2 FSI 4motion / 3.6 R36 4motion / 2.0TDI 4motion
Chassis Code 365
Lowering Front Axle 35 - 70 mm
Lowering Rear Axle 35 - 60 mm
Max Axle Load Front 1100 - 1180 kg
Max Axle Load Rear 1230 kg
Camber Plates Not Included
Ride-Height Adjustable Yes
Damping Adjustment Non-Adjustable
Quantity Full Set (Front & Rear)
Notes
  • When the adjustable spring seat is set too low according the catalogue, all guarantuees will be withdrawn.
  • Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
  • If the vehicle is equipped with the AMR System (Audi Magnetic Ride) - the system has to be deactivated. Suitable drivers are available only on request!
  • If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
  • During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
  • In some cases it might be necessary to dismount the rear adjustment to achieve the maximum lowering.
  • Rear thread adjustment block is mounted on the top.

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
2010VolkswagenPassatAWD
2011VolkswagenPassatAWD
2012VolkswagenPassatAWD
2013VolkswagenPassatAWD
2014VolkswagenPassatAWD

Customer Reviews

Questions & Answers