Product Details

These MTS Technik Street Series coilovers fit the 1998-2013 Volkswagen Bora (1J2). MTS coilovers let you adjust the suspension height to your preference and to road conditions. The firmer suspension makes the car more predictable to drive.

With these MTS Volkswagen Bora coilovers you can reset the ride height when you swap between larger summer wheels and smaller winter wheels.

MTS coilovers have a 2-year warranty with no mileage limit.

Standard Features:

  • 2-year warranty with no mileage limit.
  • Corrosion-resistant components.
  • Twin-tube dampers for stable damping.
  • Gas pressure on the hydraulic fluid stops the oil from foaming, so the dampers keep working under continuous hard use.
  • The thread and its wide adjustment range let you set the ride height precisely.
  • hexaCOIL spring perch for easier height adjustment.
  • Shock bodies have a double layer of gold zinc and the adjusters are anodized aluminum, for corrosion resistance.
  • Coilover springs made by Eibach.
Specifications
Part Number MTSGWVW10
Part Name Street Series Coilovers
Vehicle 1998-2013 Volkswagen Bora
Engine 1.4 16V / 1.6 / 1.6 16V / 1.6FSI / 1.8 / 1.8T / 2.0 / 2.3 V5 / 1.9SDI / 1.9TDI
Chassis Code 1J2
Lowering Front Axle 30 - 70 mm
Lowering Rear Axle 25 - 50 mm
Max Axle Load Front 1020 kg
Max Axle Load Rear 1080 kg
Camber Plates Not Included
Ride-Height Adjustable Yes
Damping Adjustment Non-Adjustable
Quantity Full Set (Front & Rear)
Notes
  • When the adjustable spring seat is set too low according the catalogue, all guarantees will be withdrawn.
  • Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
  • Stabilizer bars have to be changed if lowered more than 40mm.
  • If the right drive shaft diameter of more than 42 mm, the maximum lowering mentioned in the catalogue is reduced by 15 mm.
  • Not for 4x4.
  • If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
  • During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
1998VolkswagenBoraFWD
1999VolkswagenBoraFWD
2000VolkswagenBoraFWD
2001VolkswagenBoraFWD
2002VolkswagenBoraFWD
2003VolkswagenBoraFWD
2004VolkswagenBoraFWD
2005VolkswagenBoraFWD
2006VolkswagenBoraFWD
2007VolkswagenBoraFWD
2008VolkswagenBoraFWD
2009VolkswagenBoraFWD
2010VolkswagenBoraFWD
2011VolkswagenBoraFWD
2012VolkswagenBoraFWD
2013VolkswagenBoraFWD

Customer Reviews

Questions & Answers