Product Details
This Whiteline Front Sway Bar Link Assembly fits the 2005-2011 Mercury Mariner Hybrid (EP). Whiteline part number: KLC140-255. Application note: Adjustable extra heavy duty. Trim named on the listing: Hybrid. In the box: 2 links. Chassis code: EP. It goes on the front of the vehicle.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect a moderate job of about 1 hour. No alignment is needed afterward. Other Whiteline parts we list for the Mariner: 12mm Adjustable Front Camber Bolts and Rear Sway Bar Link.
Features
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Hardware: The kit includes locking nuts and washers.
- Construction: Made from strong, light alloy.
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
Specifications
| Part Number | KLC140-255 |
| Part Name | Sway Bar Link |
| Vehicle | 2005-2011 Mercury Mariner Hybrid |
| Chassis Code | EP |
| Drivetrain | AWD/FWD |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 250-275 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 250-275mm. Bolt Diameter 10mm. |