Product Details
These HKS Hipermax S GR Yaris coilovers fit the 2024+ Toyota GR Yaris (GXPA16).
HKS builds these GR Yaris coilovers with 7 kgf/mm front and 6 kgf/mm rear springs and 30-level damping adjustment. The GR Yaris is a Japan-market (JDM) car.
This is the redesigned Hipermax S, built around HKS's Flat Ride Concept: the chassis stays level through mid-corner load transfer and stays composed over broken pavement. Every 80330-series kit is built in Japan and stays fully rebuildable through HKS.
What's in the Kit
- Front coilover assemblies with rubber upper mounts
- Rear shock absorbers with rubber upper mounts
- Rear springs with ride-height adjusters
Features
- 30-level 1-Way damping force adjustment via HKS's new WR Needle mechanism
- Flat Ride Concept tuning: keeps the chassis level through mid-corner load transfer
- Full-length height-adjustable shock body
- Front and rear upper mounts pre-fitted for the application (rubber or spherical bearing as spec'd)
- Dual Preload Valve System (Dual PVS) tuned individually per vehicle
- Advanced Bump Rubber Plus for controlled progressive load response
- DURA BOOTS heat, weather, and ozone-resistant dust boots (covered under warranty)
- New HIPERMAX S-geometry stabilizer links with reduced-friction ball joints (covered under warranty)
- Aluminum upper mounts with a shot-blasted matte finish
- PNE thread coating for corrosion resistance and lower height-adjustment effort
- Custom spring rates available at time of shipment: contact us to spec your kit
- 3-year or 60,000 km manufacturer warranty, validated over 60,000 km of real-world driving
- Fully rebuildable through HKS
- Backed by three consecutive All Japan Dirt Trial Series titles
- Made in Japan
Specifications
| Part Number | 80330-AT035 |
| Part Name | HIPERMAX S GXPA16 Gen2 FULL KIT |
| Vehicle | 2024+ Toyota GR Yaris |
| Chassis Code | GXPA16 |
| Engine | G16E-GTS |
| Market | Japan (JDM) |
| Damping Adjustment | 30-Level 1-Way |
| Height Adjustable | Yes |
| Spring Rate - Front | 7 kgf/mm (69 N/mm) |
| Spring Rate - Rear | 6 kgf/mm (59 N/mm) |
| Free Height - Front | 200mm barrel |
| Free Height - Rear | 250mm barrel |
| Upper Mount - Front | Rubber |
| Upper Mount - Rear | Rubber |
| Front Damper Type | Inverted single-tube |
| Rear Damper Type | Normal single-tube |
| Rear Layout | Separate rear spring and damper |
| Damping Force - Front (rebound / compression at 0.1 m/s) | 593 / 471 N |
| Damping Force - Rear (rebound / compression at 0.1 m/s) | 363 / 432 N |
| Ride Height Range - Front | -27mm (HKS factory setting), range 0mm to -66mm vs stock |
| Ride Height Range - Rear | -26(+1 - -59) |
| Overhaul / Rebuild | Available |
| Warranty | 3-year or 60,000 km |
| Country of Origin | Japan |
| Notes | Japan market (JDM) vehicle, not sold in the USA. 2024 model-change (Gen2) GR Yaris, MT, 4WD only (HKS). |