Product Details
This Whiteline Rear Upper Inner Bushing Offset Camber Kit fits the 2009-2020 Dodge Journey. It is listed for the JC49 chassis. The kit contains 2 shell bushings and 2 tubes. Application note: Adds +/- 0.5 degrees Camber. Whiteline part number: KCA329. This part is for the rear of the vehicle.
Camber is the sideways lean of the wheel when viewed from the front. An offset control arm bushing places the pivot slightly off-center, which shifts the wheel's camber by a small, fixed amount without replacing the arm. On a lowered car that is often enough to bring the tires back toward an even footprint.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Journey: Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and Adjustable Front Sway Bar Link.
Features
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Install guide: An install guide comes in the box.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
Specifications
| Part Number | KCA329 |
| Part Name | Bushing Camber Kit |
| Vehicle | 2009-2020 Dodge Journey |
| Chassis Code | JC49 |
| Drivetrain | AWD/FWD |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 36.5 mm |
| Bushing 2 Outer Diameter | 36 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 36.5 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.5Degree Camber |