Product Details
This Whiteline Rear Upper Inner Bushing Offset Camber Kit fits the 2009-2017 Mitsubishi Lancer Ralliart. Position: rear. Whiteline's note for this fit: Adds +/- 0.5 degrees Camber. Whiteline part number: KCA329. Trim named on the listing: Ralliart. You receive 2 shell bushings and 2 tubes.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Installation is rated moderate, with about 3 hours of work listed. An alignment is required after installation. Working on the same car? We also list Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and 14mm Adjustable Front Camber Bolts for the Lancer.
Features
- Material: Polyurethane construction.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Bonded design: Bonding adds durability in high-load use.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
Specifications
| Part Number | KCA329 |
| Part Name | Bushing Camber Kit |
| Vehicle | 2009-2017 Mitsubishi Lancer Ralliart |
| Chassis Code | CY |
| Drivetrain | AWD/FWD |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 36.5 mm |
| Bushing 2 Outer Diameter | 36 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 36.5 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.5Degree Camber |