Product Details
This Whiteline Rear Upper Outer Control Arm Bushing Kit fits the 2002-2005 Honda Civic Si. In the box: 4 bushings and 2 tubes. Application note: In hub: adds +/- 1.0 degrees Camber. Part number KCA368. It goes on the rear of the vehicle. It is listed for the ES chassis.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Whiteline rates the install as moderate and lists about 3 hours. An alignment is required after installation. Working on the same car? We also list 16mm Adjustable Front Camber Bolts, 2-Point Adjustable 22mm Rear Sway Bar, and Front Control Arm Lower Inner Rear Bushing for the Civic Si.
Features
- Material: Polyurethane construction.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Install guide: Whiteline packs an install guide with it.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
Specifications
| Part Number | KCA368 |
| Part Name | Control Arm Bushings |
| Vehicle | 2002-2005 Honda Civic Si |
| Drivetrain | FWD |
| Chassis Code | ES |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 42 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 42 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | In hub - adds +/- 1.0Degree Camber; |