Product Details
This Whiteline Rear Upper Outer Control Arm Bushing Kit fits the 2001-2005 Honda Civic DX, EX, GX, HX, LX. Application note: In hub: adds +/- 1.0 degrees Camber. The listing names the DX, EX, GX, HX, and LX trims. In the box: 4 bushings and 2 tubes. It is listed for the ES/EP chassis. Order it as part number KCA368. Placement: rear.
Camber is the sideways lean of the wheel when viewed from the front. An offset control arm bushing places the pivot slightly off-center, which shifts the wheel's camber by a small, fixed amount without replacing the arm. On a lowered car that is often enough to bring the tires back toward an even footprint.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Civic: 14mm Adjustable Front Camber Bolts, Adjustable Sway Bar Vehicle Link Kit, and 2-Point Adjustable 22mm Rear Sway Bar.
Features
- Install guide: Whiteline packs an install guide with it.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Material: Built from polyurethane.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
Specifications
| Part Number | KCA368 |
| Part Name | Control Arm Bushings |
| Vehicle | 2001-2005 Honda Civic DX, EX, GX, HX, LX |
| Chassis Code | ES/EP |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 42 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 42 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | In hub - adds +/- 1.0Degree Camber; |