Product Details
This Whiteline Rear Upper Inner Bushing Offset Camber Kit fits the 2011 Mitsubishi Lancer ES Sportback. The part number is KCA329. Included: 2 shell bushings and 2 tubes. Trim named on the listing: ES Sportback. Chassis code: CY. Application note: Adds +/- 0.5 degrees Camber. It goes on the rear of the vehicle.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Whiteline rates the install as moderate and lists about 3 hours. Plan on a wheel alignment afterward. Working on the same car? We also list Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and 14mm Adjustable Front Camber Bolts for the Lancer.
Features
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Bonded design: Bonding adds durability in high-load use.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Install guide: Step-by-step installation instructions come with it.
- Material: Built from polyurethane.
Specifications
| Part Number | KCA329 |
| Part Name | Bushing Camber Kit |
| Vehicle | 2011 Mitsubishi Lancer ES Sportback |
| Chassis Code | CY |
| Drivetrain | AWD/FWD |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 36.5 mm |
| Bushing 2 Outer Diameter | 36 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 36.5 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.5Degree Camber |