Product Details
This Whiteline Rear Control Arm Bushing Upper - Inner Double Offset Camber Kit fits the 2012-2026 Subaru WRX. It is listed for the VA/VB chassis. In the box: 8 bushings, 4 tubes, 8 bolts, 8 washers, and 4 nuts. It goes on the rear of the vehicle. The part number is KCA326. Whiteline's note for this fit: On-car adjustable allows +/-0.75 degrees.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Subaru WRX: Adjustable Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Front Control Arm Lower Inner Front Bushing.
Features
- Install guide: Written install instructions are included with the part.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Anodized alloy: The alloy carries an anodized finish for durability.
- Bushing material: Made of polyurethane, which resists deflection better than soft rubber.
- Hardware: Supplied with mounting hardware.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
Specifications
| Part Number | KCA326 |
| Part Name | Control Arm Camber Correction Kit |
| Vehicle | 2012-2026 Subaru WRX |
| Chassis Code | VA/VB |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 34 mm |
| Bushing 2 Inner Diameter | 12 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 8 Bushings |
| Bushings Included | Yes |
| Grade Type | Performance |
| Inside Diameter | 15.6 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes, 8 Bolts, 8 Washers, 4 Nuts |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | On-car adjustable allows +/-0.75 Degrees; |