Product Details
This Whiteline Rear Control Arm Bushing Upper - Inner Double Offset Camber Kit fits the 2010-2017 Subaru Impreza WRX Limited. Whiteline part number: KCA326. This part is for the rear of the vehicle. Included: 8 bushings, 4 tubes, 8 bolts, 8 washers, and 4 nuts. Application note: On-car adjustable allows +/-0.75 degrees.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Impreza WRX Limited: Adjustable Rear Sway Bar Link, Front and Rear Sway Bar Kit, and Front Steering Rack And Pinion Mount Bushing.
Features
- Hardware: Also in the box: mounting hardware.
- Anodized alloy: The alloy carries an anodized finish for durability.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Install guide: Written install instructions are included with the part.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
Specifications
| Part Number | KCA326 |
| Part Name | Control Arm Camber Correction Kit |
| Vehicle | 2010-2017 Subaru Impreza WRX Limited |
| Drivetrain | AWD |
| Chassis Code | GE/GH/GR/GV/GP/GJ |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 34 mm |
| Bushing 2 Inner Diameter | 12 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 8 Bushings |
| Bushings Included | Yes |
| Grade Type | Performance |
| Inside Diameter | 15.6 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes, 8 Bolts, 8 Washers, 4 Nuts |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | On-car adjustable allows +/-0.75 Degrees; |