*Product images may not represent the actual SKU.
SPL Parts
SKU: SPL FUA R35
SPL Front Upper Camber/Caster Arms - 2009+ Nissan GT-R
Check if this fits your vehicle
Fits your vehicle
Does not fit your vehicle
*Product images may not represent the actual SKU.
SPL Parts
SKU: SPL FUA R35
Check if this fits your vehicle
Fits your vehicle
Does not fit your vehicle
SPL Parts Front Upper Control Arms (FUA) are designed with dual chassis mount adjusters, providing camber and caster adjustment while remaining fully attached to the car. The revolutionary slotted arm design does away with the need for bulky, hard to reach jam nuts. Simply turn the hex cap Double Adjusters to set the arms to their desired length, and then lock your alignment settings in place with an allen wrench. The time saved on the alignment rack can now be spent in the driver's seat! The fully encapsulated Spherical Bearing that mounts to the upright provides superior strength and negates the worry of rod end bending commonly found in other designs. The wide adjustment range provides camber gain for racers wanting to maximize grip on the track, and camber correction for lowered street vehicles needing optimal tire wear.
Using FEA (Finite Element Analysis) our CNC milled 6061-T6 Billet Aluminum arms are designed to exceed factory strength and durability. Our exclusive hex cap Double Adjuster is comprised of electroless nickel plated 4130 Chromoly along with 6061-T6 Aluminum clamps to reduce weight and prohibit corrosion, while offering quick and easy adjustment. Oversized USA made FK Spherical Bearings feature a Teflon liner to provide quiet operation, lower friction, smoother articulation, and eliminates bushing deflection under load. The liner is also self-lubricating and self-cleaning, offering robust reliability for street and track use.
Sold as a pair.
Adjustment ranges: On a 2010 GT-R test car that was lowered 1 inch, we were able to get to -5 degrees of camber at 5.9 degrees of caster. At -4 degrees of negative camber, we could reach 8 degrees of caster, and at -3.5 degrees of camber, we could get to 7.7 degrees of caster. Camber correction was measured at 0 degrees of camber at 5.8 degrees of caster.
SPL Parts Inc. suspension products are warranted to be free of defects in material and workmanship for ten (10) years or 100,000 miles from the date of purchase.
If a product fails to meet specifications, SPL PARTS INC. will, at its election, repair, replace, or make appropriate adjustment, if SPL PARTS INC. determines to its satisfaction that the product is defective in material or workmanship, i.e. contains a defect arising out of the manufacture of the product and not a defect caused by other circumstances, including, but not limited to accident, misuse, abuse, unforeseeable use, neglect, alteration, improper installation, improper adjustment, improper repair, corrosion, or failure caused by other equipment or interaction with other equipment. Using any SPL PARTS INC. arm as a tie/strap down point (ie. for a dyno session or transport) will void the warranty.
SPL PARTS INC. is not responsible for labor charges, removal charges, installation, or other incidental or consequential costs. In no event shall the liability of SPL PARTS INC. exceed the purchase price of the product.
SPL PARTS INC. makes no other warranties, either expressed or implied, including limitation warranties as to merchantability or fitness for a particular purpose. SPL PARTS INC. shall not be liable for, and buyer assumes all risk of, any advice or failure to provide advice by SPL PARTS INC. to buyer regarding the product or use and installation of product. SPL PARTS INC. shall not be liable for any special, incidental or consequential damages.
If the purchaser of the product shall fail to pay when due any portion of the purchase price, or fail to meet any terms required under contract agreed on at time of purchase, all warranties and remedies granted can be terminated.
Proof of purchase is required for all warranty claims. All warranty claims must be returned to SPL PARTS INC. for inspection, for the claim to be processed. Customers are responsible for all shipping costs.
Please contact SPL Parts by phone or email regarding any warranties.
Enter your email and password to access your account.
We will send you an email to reset your password.
Please fill in the information below to create your account.
Select your vehicle below to see compatible products.
Reset vehicle
Is your vehicle not listed? Let us know.
Is your vehicle not listed? Let us know.
Enter your email and password to access your account.
We will send you an email to reset your password.
Please fill in the information below to create your account.