{"title":"Steering Bushings","description":"","products":[{"product_id":"voodoo13-steering-column-bushing-1990-1996-nissan-300xz-z32","title":"Voodoo13 Steering Column Bushing for 1990-1996 Nissan 300ZX RWD","description":"\u003cp\u003eRestore precise steering feel on your Nissan 300ZX with the Voodoo13 billet steering column bushing. The factory nylon bushing wears out and goes sloppy; Voodoo13's billet aluminum + sealed bearing takes up the slack and brings steering feedback back to new.\u003c\/p\u003e\n\u003cp\u003ePrecision-machined 6061-T6 aluminum body with a sealed press-fit bearing replaces the factory plastic bushing. Direct install, limited lifetime warranty, designed and manufactured in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves steering feel and response\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eMIL-A-8625 Type III Hard Anodize finish with precision laser-engraved Voodoo13 logo\u003c\/li\u003e\n  \u003cli\u003eSolid and lightweight bushing gives direct steering feel and control\u003c\/li\u003e\n  \u003cli\u003eDesigned and Manufactured in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSteering Column Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400051\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eTurbo and non-turbo\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1990 Nissan 300ZX RWD — Turbo and non-turbo\u003c\/li\u003e\n  \u003cli\u003e1991 Nissan 300ZX RWD — Turbo and non-turbo\u003c\/li\u003e\n  \u003cli\u003e1992 Nissan 300ZX RWD — Turbo and non-turbo\u003c\/li\u003e\n  \u003cli\u003e1993 Nissan 300ZX RWD — Turbo and non-turbo\u003c\/li\u003e\n  \u003cli\u003e1994 Nissan 300ZX RWD — Turbo and non-turbo\u003c\/li\u003e\n  \u003cli\u003e1995 Nissan 300ZX RWD — Turbo and non-turbo\u003c\/li\u003e\n  \u003cli\u003e1996 Nissan 300ZX RWD — Turbo and non-turbo\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Hard Clear","offer_id":44354616590396,"sku":"CBNS-0100HC","price":29.0,"currency_code":"USD","in_stock":true},{"title":"Hard Gold","offer_id":44354616623164,"sku":"CBNS-0100HG","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-steering-column-bushing-1990-1996-nissan-300xz-z32-1194432606.jpg?v=1768259530"},{"product_id":"voodoo13-steering-column-bushing-1989-1994-nissan-240sx-s13","title":"Voodoo13 Steering Column Bushing for 1989-1994 Nissan 240SX RWD (S13)","description":"\u003cp\u003eRestore precise steering feel on your Nissan 240SX (S13) with the Voodoo13 billet steering column bushing. The factory nylon bushing wears out and goes sloppy; Voodoo13's billet aluminum + sealed bearing takes up the slack and brings steering feedback back to new.\u003c\/p\u003e\n\u003cp\u003ePrecision-machined 6061-T6 aluminum body with a sealed press-fit bearing replaces the factory plastic bushing. Direct install, limited lifetime warranty, designed and manufactured in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves steering feel and response\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eMIL-A-8625 Type III Hard Anodize finish with precision laser-engraved Voodoo13 logo\u003c\/li\u003e\n  \u003cli\u003eSolid and lightweight bushing gives direct steering feel and control\u003c\/li\u003e\n  \u003cli\u003eDesigned and Manufactured in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSteering Column Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400051\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1989 Nissan 240SX RWD (S13)\u003c\/li\u003e\n  \u003cli\u003e1990 Nissan 240SX RWD (S13)\u003c\/li\u003e\n  \u003cli\u003e1991 Nissan 240SX RWD (S13)\u003c\/li\u003e\n  \u003cli\u003e1992 Nissan 240SX RWD (S13)\u003c\/li\u003e\n  \u003cli\u003e1993 Nissan 240SX RWD (S13)\u003c\/li\u003e\n  \u003cli\u003e1994 Nissan 240SX RWD (S13)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Hard Clear","offer_id":44354616492092,"sku":"CBNS-0100HC","price":29.0,"currency_code":"USD","in_stock":true},{"title":"Hard Gold","offer_id":44354616524860,"sku":"CBNS-0100HG","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-steering-column-bushing-1989-1994-nissan-240sx-s13-1194426359.jpg?v=1769689178"},{"product_id":"voodoo13-steering-column-bushing-1989-1994-nissan-skyline-r32","title":"Voodoo13 Steering Column Bushing for 1989-1994 Nissan Skyline RWD (R32)","description":"\u003cp\u003eRestore precise steering feel on your Nissan Skyline (R32) with the Voodoo13 billet steering column bushing. The factory nylon bushing wears out and goes sloppy; Voodoo13's billet aluminum + sealed bearing takes up the slack and brings steering feedback back to new.\u003c\/p\u003e\n\u003cp\u003ePrecision-machined 6061-T6 aluminum body with a sealed press-fit bearing replaces the factory plastic bushing. Direct install, limited lifetime warranty, designed and manufactured in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves steering feel and response\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eMIL-A-8625 Type III Hard Anodize finish with precision laser-engraved Voodoo13 logo\u003c\/li\u003e\n  \u003cli\u003eSolid and lightweight bushing gives direct steering feel and control\u003c\/li\u003e\n  \u003cli\u003eDesigned and Manufactured in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSteering Column Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400051\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eRWD \u0026amp; AWD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1989 Nissan Skyline RWD (R32) — RWD \u0026amp; AWD\u003c\/li\u003e\n  \u003cli\u003e1990 Nissan Skyline RWD (R32) — RWD \u0026amp; AWD\u003c\/li\u003e\n  \u003cli\u003e1991 Nissan Skyline RWD (R32) — RWD \u0026amp; AWD\u003c\/li\u003e\n  \u003cli\u003e1992 Nissan Skyline RWD (R32) — RWD \u0026amp; AWD\u003c\/li\u003e\n  \u003cli\u003e1993 Nissan Skyline RWD (R32) — RWD \u0026amp; AWD\u003c\/li\u003e\n  \u003cli\u003e1994 Nissan Skyline RWD (R32) — RWD \u0026amp; AWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Hard Clear","offer_id":44354616655932,"sku":"CBNS-0100HC","price":29.0,"currency_code":"USD","in_stock":true},{"title":"Hard Gold","offer_id":44354616688700,"sku":"CBNS-0100HG","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-steering-column-bushing-1989-1994-nissan-skyline-r32-1194432697.jpg?v=1768261631"},{"product_id":"truhart-30mm-roll-center-adjuster-red-for-2001-2005-lexus-is300-jce10","title":"TruHart 30mm Roll Center Adjuster (Red) for 2001-2005 Lexus IS300 (JCE10)","description":"\u003cp\u003eWhen you Lower a Vehicle for the 2001-2005 Lexus IS300 (JCE10) the geometry of the suspension is altered. The increased length of the TruHart Roll Center Adjusters repositions and corrects the position of the front hub and lower control arms.\u003c\/p\u003e\u003cp\u003eThe result is corrected suspension geometry improving steering response, handling, tire contact patch, and makes alignments more consistent.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThese adjusters are not height adjustable or dynamic; once installed they hold a fixed geometry correction.\u003c\/li\u003e\n\u003cli\u003eMade from durable materials, often anodized or finished for corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eBetter steering response and more predictable handling (especially when cornering) because the front suspension’s geometry is more correct under lowered conditions.\u003c\/li\u003e\n\u003cli\u003eLess change in camber \/ toe under load or suspension travel, since roll center is less “moved†by lowering.\u003c\/li\u003e\n\u003cli\u003eImproved tire contact patch (better grip, less uneven wear) due to more optimal hub \/ arm positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-L602\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eRoll Center Adjuster\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2001-2005 Lexus IS300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eJCE10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2001 Lexus IS300 (JCE10)\u003c\/li\u003e\n\u003cli\u003e2002 Lexus IS300 (JCE10)\u003c\/li\u003e\n\u003cli\u003e2003 Lexus IS300 (JCE10)\u003c\/li\u003e\n\u003cli\u003e2004 Lexus IS300 (JCE10)\u003c\/li\u003e\n\u003cli\u003e2005 Lexus IS300 (JCE10)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544704188476,"sku":"TH-L602","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-30mm-roll-center-adjuster-red-for-2001-2005-lexus-is300-jce10-th-l602-1213315316.jpg?v=1766949637"},{"product_id":"truhart-aluminum-billet-shifter-bushings-for-1994-2001-acura-integra-dc2db7d88","title":"TruHart Aluminum Billet Shifter Bushings for 1994-2001 Acura Integra (DC2\/DB7\/D88)","description":"\u003cp\u003eThe Billet Aluminum Shifter Bushing Kit designed for improved shifting performance on Your 1994-2001 Acura Integra (DC2\/DB7\/D88). It replaces the factory rubber bushings in the shifter assembly with solid billet aluminum components to reduce slop, improve precision, and give a more direct, crisp feel when shifting.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUses solid billet aluminum bushings - much stiffer than stock rubber for more precise shifting feel.\u003c\/li\u003e\n\u003cli\u003eInstalls in the stock shifter bushings’ location, using existing shifter linkage\/hardware.\u003c\/li\u003e\n\u003cli\u003eReduces binding and worn rubber flex, resulting in smoother, more direct and positive shift action.\u003c\/li\u003e\n\u003cli\u003eBillet aluminum resists wear and deformation better over time compared with rubber - less maintenance and longer life.\u003c\/li\u003e\n\u003cli\u003ePolished or natural aluminum finish for visual appeal in the shifter linkage area; more premium look over stock rubber bushings.\u003c\/li\u003e\n\u003cli\u003eBacked by TruHart’s standard warranty for non-OE parts (2 years in many cases) when used as intended.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H302-AL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eShifter Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1994-2001 Acura Integra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eDC2\/DB7\/D88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061 T6 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1994 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1995 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1996 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1997 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1998 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1999 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e2000 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e2001 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544879071292,"sku":"TH-H302-AL","price":40.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-aluminum-billet-shifter-bushings-for-1994-2001-acura-integra-dc2-db7-d88-th-h302-al-1213316856.jpg?v=1766913820"},{"product_id":"truhart-aluminum-billet-shifter-bushings-for-1999-2000-honda-civic-ek","title":"TruHart Aluminum Billet Shifter Bushings for 1999-2000 Honda Civic (EK)","description":"\u003cp\u003eThe Billet Aluminum Shifter Bushing Kit designed for improved shifting performance on Your 1999-2000 Honda Civic (EK). It replaces the factory rubber bushings in the shifter assembly with solid billet aluminum components to reduce slop, improve precision, and give a more direct, crisp feel when shifting.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUses solid billet aluminum bushings - much stiffer than stock rubber for more precise shifting feel.\u003c\/li\u003e\n\u003cli\u003eInstalls in the stock shifter bushings’ location, using existing shifter linkage\/hardware.\u003c\/li\u003e\n\u003cli\u003eReduces binding and worn rubber flex, resulting in smoother, more direct and positive shift action.\u003c\/li\u003e\n\u003cli\u003eBillet aluminum resists wear and deformation better over time compared with rubber - less maintenance and longer life.\u003c\/li\u003e\n\u003cli\u003ePolished or natural aluminum finish for visual appeal in the shifter linkage area; more premium look over stock rubber bushings.\u003c\/li\u003e\n\u003cli\u003eBacked by TruHart’s standard warranty for non-OE parts (2 years in many cases) when used as intended.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H302-AL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eShifter Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1999-2000 Honda Civic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eEK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061 T6 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1999 Honda Civic (EK)\u003c\/li\u003e\n\u003cli\u003e2000 Honda Civic (EK)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544879136828,"sku":"TH-H302-AL","price":40.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-aluminum-billet-shifter-bushings-for-1999-2000-honda-civic-ek-th-h302-al-1213316857.jpg?v=1766913791"},{"product_id":"truhart-anti-lift-kit-plus-05-degrees-for-2002-2007-subaru-impreza-gdgg","title":"TruHart Anti Lift Kit - Plus 0.5 Degrees for 2002-2007 Subaru Impreza (GD\/GG)","description":"\u003cp\u003eAn ideal solution for your 2002-2007 Subaru Impreza (GD\/GG) specific problem. This kit changes the pick-up point for the front lower control arm, which results in a decrease in the built-in anti-dive\/anti-lift geometry effect of the OE suspension.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe hardened rubber bushings also assist in firming up steering response in the front end.\u003c\/li\u003e\n\u003cli\u003eReduces the built-in anti-lift effect of the OE suspension.\u003c\/li\u003e\n\u003cli\u003eBuilt to withstand the demands of performance driving.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for 2002-2007 Subaru Impreza models.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-S301\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eAnti Lift Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2002-2007 Subaru Impreza\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eGD\/GG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2002 Subaru Impreza (GD\/GG)\u003c\/li\u003e\n\u003cli\u003e2003 Subaru Impreza (GD\/GG)\u003c\/li\u003e\n\u003cli\u003e2004 Subaru Impreza (GD\/GG)\u003c\/li\u003e\n\u003cli\u003e2005 Subaru Impreza (GD\/GG)\u003c\/li\u003e\n\u003cli\u003e2006 Subaru Impreza (GD\/GG)\u003c\/li\u003e\n\u003cli\u003e2007 Subaru Impreza (GD\/GG)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544879202364,"sku":"TH-S301","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-anti-lift-kit-plus-0-5-degrees-for-2002-2007-subaru-impreza-gd-gg-th-s301-1213316858.jpg?v=1766913760"},{"product_id":"truhart-control-arm-bushing-set-26-pieces-for-1992-1995-honda-civic-eg","title":"TruHart Control Arm Bushing Set (26-Pieces) for 1992-1995 Honda Civic (EG)","description":"\u003cp\u003eTruHart 26-piece Control Arm Bushing Set for the 1992-1995 Honda Civic (EG) is a kit that will replace all 26 suspension arm bushings. This kit is a must do to replace all the old worn, torn, and tattered bushings that are on all the arms throughout the suspension.\u003c\/p\u003e\u003cp\u003eThe bushing kit utilizes hardened rubber bushing material that gives better performance over the OEM bushing but not a harsh unforgiving ride like a spherical bushing or urethane bushing would in this application.\u003c\/p\u003e\u003cp\u003eOnce installed you can expect more true alignment specs and better handling characteristics as if the car were new again only better.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComprehensive kit replacing all 26 suspension arm bushings.\u003c\/li\u003e\n\u003cli\u003eHardened rubber for improved performance over OEM bushings without the harshness of urethane or spherical bushings.\u003c\/li\u003e\n\u003cli\u003eRestores alignment specs and enhances handling characteristics.\u003c\/li\u003e\n\u003cli\u003eEnhances steering response and handling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H305-KIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eControl Arm Bushing Set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1992-1995 Honda Civic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e26 Pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eEG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1992 Honda Civic (EG)\u003c\/li\u003e\n\u003cli\u003e1993 Honda Civic (EG)\u003c\/li\u003e\n\u003cli\u003e1994 Honda Civic (EG)\u003c\/li\u003e\n\u003cli\u003e1995 Honda Civic (EG)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544881004604,"sku":"TH-H305-KIT","price":378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-control-arm-bushing-set-26-pieces-for-1992-1995-honda-civic-eg-th-h305-kit-1213316873.jpg?v=1766913337"},{"product_id":"truhart-control-arm-bushing-set-26-pieces-for-1994-2001-acura-integra-dc2db7d88","title":"TruHart Control Arm Bushing Set (26-Pieces) for 1994-2001 Acura Integra (DC2\/DB7\/D88)","description":"\u003cp\u003eTruHart 26-piece Control Arm Bushing Set for the 1994-2001 Acura Integra (DC2\/DB7\/D88) is a kit that will replace all 26 suspension arm bushings. This kit is a must do to replace all the old worn, torn, and tattered bushings that are on all the arms throughout the suspension.\u003c\/p\u003e\u003cp\u003eThe bushing kit utilizes hardened rubber bushing material that gives better performance over the OEM bushing but not a harsh unforgiving ride like a spherical bushing or urethane bushing would in this application.\u003c\/p\u003e\u003cp\u003eOnce installed you can expect more true alignment specs and better handling characteristics as if the car were new again only better.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComprehensive kit replacing all 26 suspension arm bushings.\u003c\/li\u003e\n\u003cli\u003eHardened rubber for improved performance over OEM bushings without the harshness of urethane or spherical bushings.\u003c\/li\u003e\n\u003cli\u003eRestores alignment specs and enhances handling characteristics.\u003c\/li\u003e\n\u003cli\u003eEnhances steering response and handling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H305-1-KIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eControl Arm Bushing Set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1994-2001 Acura Integra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e26 Pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eDC2\/DB7\/D88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1994 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1995 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1996 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1997 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1998 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1999 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e2000 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e2001 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544881070140,"sku":"TH-H305-1-KIT","price":378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-control-arm-bushing-set-26-pieces-for-1994-2001-acura-integra-dc2-db7-d88-th-h305-1-kit-1213316874.jpg?v=1766913277"},{"product_id":"truhart-driveshaft-spacer-for-2000-2009-honda-s2000-ap1ap2","title":"TruHart Driveshaft Spacer for 2000-2009 Honda S2000 (AP1\/AP2)","description":"\u003cp\u003eWhen the S2000 (AP1 or AP2) for the 2000-2009 Honda S2000 (AP1\/AP2) is Lowered it pulls the Driveshaft out of the Hub and the Angle is Changed. These spacers prevent premature bearing and CV joint wear associated with these changes.\u003c\/p\u003e\u003cp\u003eIn some instances, lowering causes the driveshaft to vibrate due to the new position, these spacers will eliminate any vibrations.\u003c\/p\u003e\u003cp\u003eThe two-piece design makes for an easy install without having to remove the driveshaft itself, includes all necessary hardware.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCorrects the driveshaft\/hub alignment (angle and extension) caused by lowering the car. This helps ensure that the driveshaft is not being pulled out of the hub or put into a bind.\u003c\/li\u003e\n\u003cli\u003eEliminates or reduces vibrations that are felt when lowering causes misalignment.\u003c\/li\u003e\n\u003cli\u003eHelps extend life of CV joints, wheel bearings, and\/or hubs by reducing abnormal stress.\u003c\/li\u003e\n\u003cli\u003eMachined 2-piece spacer.\u003c\/li\u003e\n\u003cli\u003eIncludes necessary hardware with the kit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H607\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eDriveshaft Spacer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2000-2009 Honda S2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eAP1\/AP2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2000 Honda S2000 (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2001 Honda S2000 (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2002 Honda S2000 (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2003 Honda S2000 (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2004 Honda S2000 (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2005 Honda S2000 (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2006 Honda S2000 (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2007 Honda S2000 (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2008 Honda S2000 (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2009 Honda S2000 (AP1\/AP2)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544881856572,"sku":"TH-H607","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-driveshaft-spacer-for-2000-2009-honda-s2000-ap1-ap2-th-h607-1213316884.jpg?v=1766912979"},{"product_id":"truhart-front-compliance-pillowball-bushings-for-1992-1995-honda-civic-eg","title":"TruHart Front Compliance Pillowball Bushings for 1992-1995 Honda Civic (EG)","description":"\u003cp\u003eTruHart Compliance Bushings for the 1992-1995 Honda Civic (EG) replace your worn factory units with spherical units reducing deflection and providing a more direct road feel\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePillowball bushings reduce compliance and unwanted movement in the front suspension, resulting in sharper and more responsive steering feedback.\u003c\/li\u003e\n\u003cli\u003eMade from high-quality materials, these bushings are designed to withstand high loads and resist wear, providing long-lasting performance.\u003c\/li\u003e\n\u003cli\u003eBy replacing softer factory rubber bushings, the pillowball design reduces flex and improves suspension consistency under load, especially during aggressive driving or track use.\u003c\/li\u003e\n\u003cli\u003eWhile offering improved performance and precision, these bushings help maintain a balance between stiffness and comfort compared to solid or full metal replacements.\u003c\/li\u003e\n\u003cli\u003eEngineered to be a direct fit for factory mounting points, making installation straightforward without requiring modifications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H307-PB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eCompliance Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1992-1995 Honda Civic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eEG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1992 Honda Civic (EG)\u003c\/li\u003e\n\u003cli\u003e1993 Honda Civic (EG)\u003c\/li\u003e\n\u003cli\u003e1994 Honda Civic (EG)\u003c\/li\u003e\n\u003cli\u003e1995 Honda Civic (EG)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544882380860,"sku":"TH-H307-PB","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-compliance-pillowball-bushings-for-1992-1995-honda-civic-eg-th-h307-pb-1213316888.jpg?v=1766912857"},{"product_id":"truhart-front-compliance-pillowball-bushings-for-1994-2001-acura-integra-dc2db7d88","title":"TruHart Front Compliance Pillowball Bushings for 1994-2001 Acura Integra (DC2\/DB7\/D88)","description":"\u003cp\u003eTruHart Compliance Bushings for the 1994-2001 Acura Integra (DC2\/DB7\/D88) replace your worn factory units with spherical units reducing deflection and providing a more direct road feel\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePillowball bushings reduce compliance and unwanted movement in the front suspension, resulting in sharper and more responsive steering feedback.\u003c\/li\u003e\n\u003cli\u003eMade from high-quality materials, these bushings are designed to withstand high loads and resist wear, providing long-lasting performance.\u003c\/li\u003e\n\u003cli\u003eBy replacing softer factory rubber bushings, the pillowball design reduces flex and improves suspension consistency under load, especially during aggressive driving or track use.\u003c\/li\u003e\n\u003cli\u003eWhile offering improved performance and precision, these bushings help maintain a balance between stiffness and comfort compared to solid or full metal replacements.\u003c\/li\u003e\n\u003cli\u003eEngineered to be a direct fit for factory mounting points, making installation straightforward without requiring modifications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H307-PB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eCompliance Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1994-2001 Acura Integra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eDC2\/DB7\/D88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1994 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1995 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1996 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1997 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1998 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1999 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e2000 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e2001 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544882446396,"sku":"TH-H307-PB","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-compliance-pillowball-bushings-for-1994-2001-acura-integra-dc2-db7-d88-th-h307-pb-1213316889.jpg?v=1766912829"},{"product_id":"truhart-front-compliance-rubber-bushing-for-1992-1995-honda-civic-eg","title":"TruHart Front Compliance Rubber Bushing for 1992-1995 Honda Civic (EG)","description":"\u003cp\u003eTruHart Compliance Bushings for the 1992-1995 Honda Civic (EG) replace your worn factory units with hardened rubber units reducing deflection and providing a more direct road feel\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePillowball bushings reduce compliance and unwanted movement in the front suspension, resulting in sharper and more responsive steering feedback.\u003c\/li\u003e\n\u003cli\u003eMade from high-quality materials, these bushings are designed to withstand high loads and resist wear, providing long-lasting performance.\u003c\/li\u003e\n\u003cli\u003eBy replacing softer factory rubber bushings, the pillowball design reduces flex and improves suspension consistency under load, especially during aggressive driving or track use.\u003c\/li\u003e\n\u003cli\u003eWhile offering improved performance and precision, these bushings help maintain a balance between stiffness and comfort compared to solid or full metal replacements.\u003c\/li\u003e\n\u003cli\u003eEngineered to be a direct fit for factory mounting points, making installation straightforward without requiring modifications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H307\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eCompliance Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1992-1995 Honda Civic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eEG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1992 Honda Civic (EG)\u003c\/li\u003e\n\u003cli\u003e1993 Honda Civic (EG)\u003c\/li\u003e\n\u003cli\u003e1994 Honda Civic (EG)\u003c\/li\u003e\n\u003cli\u003e1995 Honda Civic (EG)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544882511932,"sku":"TH-H307","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-compliance-rubber-bushing-for-1992-1995-honda-civic-eg-th-h307-1213316890.jpg?v=1766912770"},{"product_id":"truhart-front-compliance-rubber-bushing-for-1994-2001-acura-integra-dc2db7d88","title":"TruHart Front Compliance Rubber Bushing for 1994-2001 Acura Integra (DC2\/DB7\/D88)","description":"\u003cp\u003eTruHart Compliance Bushings for the 1994-2001 Acura Integra (DC2\/DB7\/D88) replace your worn factory units with hardened rubber units reducing deflection and providing a more direct road feel\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePillowball bushings reduce compliance and unwanted movement in the front suspension, resulting in sharper and more responsive steering feedback.\u003c\/li\u003e\n\u003cli\u003eMade from high-quality materials, these bushings are designed to withstand high loads and resist wear, providing long-lasting performance.\u003c\/li\u003e\n\u003cli\u003eBy replacing softer factory rubber bushings, the pillowball design reduces flex and improves suspension consistency under load, especially during aggressive driving or track use.\u003c\/li\u003e\n\u003cli\u003eWhile offering improved performance and precision, these bushings help maintain a balance between stiffness and comfort compared to solid or full metal replacements.\u003c\/li\u003e\n\u003cli\u003eEngineered to be a direct fit for factory mounting points, making installation straightforward without requiring modifications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H307\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eCompliance Pillowball Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1994-2001 Acura Integra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eDC2\/DB7\/D88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1994 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1995 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1996 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1997 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1998 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1999 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e2000 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e2001 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544882544700,"sku":"TH-H307","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-compliance-rubber-bushing-for-1994-2001-acura-integra-dc2-db7-d88-th-h307-1213316891.jpg?v=1766912798"},{"product_id":"truhart-front-roll-center-adjusters-for-1992-2000-honda-civic-egek","title":"TruHart Front Roll Center Adjusters for 1992-2000 Honda Civic (EG\/EK)","description":"\u003cp\u003eWhen you Lower a Vehicle for the 1992-2000 Honda Civic (EG\/EK) the geometry of the suspension is altered. The increased length of the TruHart Roll Center Adjusters repositions and corrects the position of the front hub and lower control arms.\u003c\/p\u003e\u003cp\u003eThe result is corrected suspension geometry improving steering response, handling, tire contact patch, and makes alignments more consistent.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThese adjusters are not height adjustable or dynamic; once installed they hold a fixed geometry correction.\u003c\/li\u003e\n\u003cli\u003eMade from durable materials, often anodized or finished for corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eBetter steering response and more predictable handling (especially when cornering) because the front suspension’s geometry is more correct under lowered conditions.\u003c\/li\u003e\n\u003cli\u003eLess change in camber \/ toe under load or suspension travel, since roll center is less “moved†by lowering.\u003c\/li\u003e\n\u003cli\u003eImproved tire contact patch (better grip, less uneven wear) due to more optimal hub \/ arm positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H601\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eRoll Center Adjusters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1992-2000 Honda Civic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eEG\/EK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1992 Honda Civic (EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1993 Honda Civic (EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1994 Honda Civic (EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1995 Honda Civic (EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1996 Honda Civic (EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1997 Honda Civic (EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1998 Honda Civic (EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1999 Honda Civic (EG\/EK)\u003c\/li\u003e\n\u003cli\u003e2000 Honda Civic (EG\/EK)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544884379708,"sku":"TH-H601","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-roll-center-adjusters-for-1992-2000-honda-civic-eg-ek-th-h601-1213316904.jpg?v=1766912349"},{"product_id":"truhart-front-roll-center-adjusters-for-1994-2001-acura-integra-dc2db7d88","title":"TruHart Front Roll Center Adjusters for 1994-2001 Acura Integra (DC2\/DB7\/D88)","description":"\u003cp\u003eWhen you Lower a Vehicle for the 1994-2001 Acura Integra (DC2\/DB7\/D88) the geometry of the suspension is altered. The increased length of the TruHart Roll Center Adjusters repositions and corrects the position of the front hub and lower control arms.\u003c\/p\u003e\u003cp\u003eThe result is corrected suspension geometry improving steering response, handling, tire contact patch, and makes alignments more consistent.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThese adjusters are not height adjustable or dynamic; once installed they hold a fixed geometry correction.\u003c\/li\u003e\n\u003cli\u003eMade from durable materials, often anodized or finished for corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eBetter steering response and more predictable handling (especially when cornering) because the front suspension’s geometry is more correct under lowered conditions.\u003c\/li\u003e\n\u003cli\u003eLess change in camber \/ toe under load or suspension travel, since roll center is less “moved†by lowering.\u003c\/li\u003e\n\u003cli\u003eImproved tire contact patch (better grip, less uneven wear) due to more optimal hub \/ arm positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H601\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eRoll Center Adjusters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1994-2001 Acura Integra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eDC2\/DB7\/D88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1994 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1995 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1996 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1997 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1998 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1999 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e2000 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e2001 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544884445244,"sku":"TH-H601","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-roll-center-adjusters-for-1994-2001-acura-integra-dc2-db7-d88-th-h601-1213316905.jpg?v=1766912377"},{"product_id":"truhart-front-roll-center-adjusters-for-1997-2001-honda-cr-v-rd1rd2","title":"TruHart Front Roll Center Adjusters for 1997-2001 Honda CR-V (RD1\/RD2)","description":"\u003cp\u003eWhen you Lower a Vehicle for the 1997-2001 Honda CR-V (RD1\/RD2) the geometry of the suspension is altered. The increased length of the TruHart Roll Center Adjusters repositions and corrects the position of the front hub and lower control arms.\u003c\/p\u003e\u003cp\u003eThe result is corrected suspension geometry improving steering response, handling, tire contact patch, and makes alignments more consistent.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThese adjusters are not height adjustable or dynamic; once installed they hold a fixed geometry correction.\u003c\/li\u003e\n\u003cli\u003eMade from durable materials, often anodized or finished for corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eBetter steering response and more predictable handling (especially when cornering) because the front suspension’s geometry is more correct under lowered conditions.\u003c\/li\u003e\n\u003cli\u003eLess change in camber \/ toe under load or suspension travel, since roll center is less “moved†by lowering.\u003c\/li\u003e\n\u003cli\u003eImproved tire contact patch (better grip, less uneven wear) due to more optimal hub \/ arm positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H601\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eRoll Center Adjusters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1997-2001 Honda CR-V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eRD1\/RD2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1997 Honda CR-V (RD1\/RD2)\u003c\/li\u003e\n\u003cli\u003e1998 Honda CR-V (RD1\/RD2)\u003c\/li\u003e\n\u003cli\u003e1999 Honda CR-V (RD1\/RD2)\u003c\/li\u003e\n\u003cli\u003e2000 Honda CR-V (RD1\/RD2)\u003c\/li\u003e\n\u003cli\u003e2001 Honda CR-V (RD1\/RD2)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544884510780,"sku":"TH-H601","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-roll-center-adjusters-for-1997-2001-honda-cr-v-rd1-rd2-th-h601-1213316906.jpg?v=1766912318"},{"product_id":"truhart-front-roll-center-adjusters-for-2001-2005-honda-civic-es","title":"TruHart Front Roll Center Adjusters for 2001-2005 Honda Civic (ES)","description":"\u003cp\u003eWhen you Lower a Vehicle for the 2001-2005 Honda Civic (ES) the geometry of the suspension is altered. The increased length of the TruHart Roll Center Adjusters repositions and corrects the position of the front hub and lower control arms.\u003c\/p\u003e\u003cp\u003eThe result is corrected suspension geometry improving steering response, handling, tire contact patch, and makes alignments more consistent.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThese adjusters are not height adjustable or dynamic; once installed they hold a fixed geometry correction.\u003c\/li\u003e\n\u003cli\u003eMade from durable materials, often anodized or finished for corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eBetter steering response and more predictable handling (especially when cornering) because the front suspension’s geometry is more correct under lowered conditions.\u003c\/li\u003e\n\u003cli\u003eLess change in camber \/ toe under load or suspension travel, since roll center is less “moved†by lowering.\u003c\/li\u003e\n\u003cli\u003eImproved tire contact patch (better grip, less uneven wear) due to more optimal hub \/ arm positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H602\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eRoll Center Adjusters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2001-2005 Honda Civic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eES\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2001 Honda Civic (ES)\u003c\/li\u003e\n\u003cli\u003e2002 Honda Civic (ES)\u003c\/li\u003e\n\u003cli\u003e2003 Honda Civic (ES)\u003c\/li\u003e\n\u003cli\u003e2004 Honda Civic (ES)\u003c\/li\u003e\n\u003cli\u003e2005 Honda Civic (ES)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544884576316,"sku":"TH-H602","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-roll-center-adjusters-for-2001-2005-honda-civic-es-th-h602-1213316907.jpg?v=1766912291"},{"product_id":"truhart-front-roll-center-adjusters-for-2003-2006-infiniti-g35-v35","title":"TruHart Front Roll Center Adjusters for 2003-2007 Infiniti G35 (V35)","description":"\u003cp\u003eWhen you Lower a Vehicle for the 2003-2007 Infiniti G35 (V35) the geometry of the suspension is altered. The increased length of the TruHart Roll Center Adjusters repositions and corrects the position of the front hub and lower control arms.\u003c\/p\u003e\u003cp\u003eThe result is corrected suspension geometry improving steering response, handling, tire contact patch, and makes alignments more consistent.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThese adjusters are not height adjustable or dynamic; once installed they hold a fixed geometry correction.\u003c\/li\u003e\n\u003cli\u003eMade from durable materials, often anodized or finished for corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eBetter steering response and more predictable handling (especially when cornering) because the front suspension’s geometry is more correct under lowered conditions.\u003c\/li\u003e\n\u003cli\u003eLess change in camber \/ toe under load or suspension travel, since roll center is less “moved†by lowering.\u003c\/li\u003e\n\u003cli\u003eImproved tire contact patch (better grip, less uneven wear) due to more optimal hub \/ arm positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-N606\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eRoll Center Adjusters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2003-2007 Infiniti G35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eV35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2003 Infiniti G35 (V35)\u003c\/li\u003e\n\u003cli\u003e2004 Infiniti G35 (V35)\u003c\/li\u003e\n\u003cli\u003e2005 Infiniti G35 (V35)\u003c\/li\u003e\n\u003cli\u003e2006 Infiniti G35 (V35)\u003c\/li\u003e\n\u003cli\u003e2007 Infiniti G35 (V35)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544884641852,"sku":"TH-N606","price":162.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-roll-center-adjusters-for-2003-2006-infiniti-g35-v35-th-n606-1213316908.jpg?v=1766912230"},{"product_id":"truhart-front-roll-center-adjusters-for-2003-2007-nissan-350z-z33","title":"TruHart Front Roll Center Adjusters for 2003-2007 Nissan 350Z (Z33)","description":"\u003cp\u003eWhen you Lower a Vehicle for the 2003-2007 Nissan 350Z (Z33) the geometry of the suspension is altered. The increased length of the TruHart Roll Center Adjusters repositions and corrects the position of the front hub and lower control arms.\u003c\/p\u003e\u003cp\u003eThe result is corrected suspension geometry improving steering response, handling, tire contact patch, and makes alignments more consistent.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThese adjusters are not height adjustable or dynamic; once installed they hold a fixed geometry correction.\u003c\/li\u003e\n\u003cli\u003eMade from durable materials, often anodized or finished for corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eBetter steering response and more predictable handling (especially when cornering) because the front suspension’s geometry is more correct under lowered conditions.\u003c\/li\u003e\n\u003cli\u003eLess change in camber \/ toe under load or suspension travel, since roll center is less “moved†by lowering.\u003c\/li\u003e\n\u003cli\u003eImproved tire contact patch (better grip, less uneven wear) due to more optimal hub \/ arm positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-N606\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eRoll Center Adjusters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2003-2007 Nissan 350Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eZ33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2003 Nissan 350Z (Z33)\u003c\/li\u003e\n\u003cli\u003e2004 Nissan 350Z (Z33)\u003c\/li\u003e\n\u003cli\u003e2005 Nissan 350Z (Z33)\u003c\/li\u003e\n\u003cli\u003e2006 Nissan 350Z (Z33)\u003c\/li\u003e\n\u003cli\u003e2007 Nissan 350Z (Z33)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544885035068,"sku":"TH-N606","price":162.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-roll-center-adjusters-for-2003-2007-nissan-350z-z33-th-n606-1213316910.jpg?v=1766912198"},{"product_id":"truhart-front-roll-center-adjusters-for-2017-2025-honda-civic-type-r-fk8fl5","title":"TruHart Front Roll Center Adjusters for 2017+ Honda Civic Type R (FK8\/FL5)","description":"\u003cp\u003eWhen you Lower a Vehicle for the 2017+ Honda Civic Type R (FK8\/FL5) the geometry of the suspension is altered. The increased length of the TruHart Roll Center Adjusters repositions and corrects the position of the front hub and lower control arms.\u003c\/p\u003e\u003cp\u003eThe result is corrected suspension geometry improving steering response, handling, tire contact patch, and makes alignments more consistent.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThese adjusters are not height adjustable or dynamic; once installed they hold a fixed geometry correction.\u003c\/li\u003e\n\u003cli\u003eMade from durable materials, often anodized or finished for corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eBetter steering response and more predictable handling (especially when cornering) because the front suspension’s geometry is more correct under lowered conditions.\u003c\/li\u003e\n\u003cli\u003eLess change in camber \/ toe under load or suspension travel, since roll center is less “moved†by lowering.\u003c\/li\u003e\n\u003cli\u003eImproved tire contact patch (better grip, less uneven wear) due to more optimal hub \/ arm positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H613\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eRoll Center Adjusters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2017+ Honda Civic Type R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eFK8\/FL5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2017 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2018 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2019 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2020 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2021 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2022 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2023 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2024 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2025 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2026 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544885166140,"sku":"TH-H613","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-roll-center-adjusters-for-2017-2025-honda-civic-type-r-fk8-fl5-th-h613-1213316911.jpg?v=1766912170"},{"product_id":"truhart-front-stabilizer-links-for-1993-2007-subaru-impreza-gcgdgg","title":"TruHart Front Stabilizer Links for 1993-2001 Subaru Impreza (GC\/GF)","description":"\u003cp\u003eTruHart End Link Set for the 1993-2001 Subaru Impreza (GC\/GF) are an ideal solution for upgraded swaybars. When you use thicker swaybars the OEM end links typically cannot hold up to additional strain the upgraded bar puts on the end link often breaking or bending them.\u003c\/p\u003e\u003cp\u003eThese end links will withstand the torture of upgraded swaybars but can also be used as an upgrade for OEM swaybars.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStabilizer links help reduce body roll during cornering, enhancing overall vehicle stability and control.\u003c\/li\u003e\n\u003cli\u003eMade from durable steel or aluminum with corrosion-resistant coatings, ensuring long-lasting performance even under harsh conditions.\u003c\/li\u003e\n\u003cli\u003eDesigned for exact fitment and optimal movement, minimizing play and providing consistent suspension response.\u003c\/li\u003e\n\u003cli\u003eUpgraded bushings or ball joints reduce noise and vibration while improving the responsiveness of the sway bar.\u003c\/li\u003e\n\u003cli\u003eTruHart stabilizer links are designed for easy installation with direct fit to OEM mounting points, making upgrades hassle-free.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-S302\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStabilizer Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1993-2001 Subaru Impreza\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eGC\/GF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1993 Subaru Impreza (GC\/GF)\u003c\/li\u003e\n\u003cli\u003e1994 Subaru Impreza (GC\/GF)\u003c\/li\u003e\n\u003cli\u003e1995 Subaru Impreza (GC\/GF)\u003c\/li\u003e\n\u003cli\u003e1996 Subaru Impreza (GC\/GF)\u003c\/li\u003e\n\u003cli\u003e1997 Subaru Impreza (GC\/GF)\u003c\/li\u003e\n\u003cli\u003e1998 Subaru Impreza (GC\/GF)\u003c\/li\u003e\n\u003cli\u003e1999 Subaru Impreza (GC\/GF)\u003c\/li\u003e\n\u003cli\u003e2000 Subaru Impreza (GC\/GF)\u003c\/li\u003e\n\u003cli\u003e2001 Subaru Impreza (GC\/GF)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544885264444,"sku":"TH-S302","price":112.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-stabilizer-links-for-1993-2007-subaru-impreza-gc-gd-gg-th-s302-1213316912.jpg?v=1766912138"},{"product_id":"truhart-front-upper-control-arm-bushing-set-with-pillowball-for-1992-1995-honda-civic-eg","title":"TruHart Front Upper Control Arm Bushing Set w\/ Pillowball for 1992-1995 Honda Civic (EG)","description":"\u003cp\u003eThe Performance Upgrade Front Upper Control Arm Bushing Set designed for 1992-1995 Honda Civic (EG). These are spherical (pillowball) style bushings that replace the OE rubber insert in the upper control arm, delivering more precise handling, reduced deflection, and improved feedback from the suspension. Built with high-quality materials, they are engineered for enthusiasts who want better feel and responsiveness without replacing the entire arm.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUses pillowball \/ spherical bearings instead of stock rubber to reduce unwanted flex and improve steering feedback.\u003c\/li\u003e\n\u003cli\u003eDesigned as a direct replacement: installs in the stock control arm location without the need for arm replacement.\u003c\/li\u003e\n\u003cli\u003eHigher durability and longevity over OE rubber due to rigid design - better handling of suspension loads under spirited driving.\u003c\/li\u003e\n\u003cli\u003ePrecision fit that preserves control arm geometry and alignment more tightly than rubber setups.\u003c\/li\u003e\n\u003cli\u003eBacked by TruHart’s quality assurance and warranty support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H303-PB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eControl Arm Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1992-1995 Honda Civic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eEG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1992 Honda Civic (EG)\u003c\/li\u003e\n\u003cli\u003e1993 Honda Civic (EG)\u003c\/li\u003e\n\u003cli\u003e1994 Honda Civic (EG)\u003c\/li\u003e\n\u003cli\u003e1995 Honda Civic (EG)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544885919804,"sku":"TH-H303-PB","price":144.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-upper-control-arm-bushing-set-w-pillowball-for-1992-1995-honda-civic-eg-th-h303-pb-1213316918.jpg?v=1766911931"},{"product_id":"truhart-front-upper-control-arm-bushing-set-with-pillowball-for-1994-2001-acura-integra-dc2db7d88","title":"TruHart Front Upper Control Arm Bushing Set w\/ Pillowball for 1994-2001 Acura Integra (DC2\/DB7\/D88)","description":"\u003cp\u003eThe Performance Upgrade Front Upper Control Arm Bushing Set designed for 1994-2001 Acura Integra (DC2\/DB7\/D88). These are spherical (pillowball) style bushings that replace the OE rubber insert in the upper control arm, delivering more precise handling, reduced deflection, and improved feedback from the suspension. Built with high-quality materials, they are engineered for enthusiasts who want better feel and responsiveness without replacing the entire arm.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUses pillowball \/ spherical bearings instead of stock rubber to reduce unwanted flex and improve steering feedback.\u003c\/li\u003e\n\u003cli\u003eDesigned as a direct replacement: installs in the stock control arm location without the need for arm replacement.\u003c\/li\u003e\n\u003cli\u003eHigher durability and longevity over OE rubber due to rigid design - better handling of suspension loads under spirited driving.\u003c\/li\u003e\n\u003cli\u003ePrecision fit that preserves control arm geometry and alignment more tightly than rubber setups.\u003c\/li\u003e\n\u003cli\u003eBacked by TruHart’s quality assurance and warranty support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H303-PB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eControl Arm Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1994-2001 Acura Integra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eDC2\/DB7\/D88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1994 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1995 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1996 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1997 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1998 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1999 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e2000 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e2001 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544885952572,"sku":"TH-H303-PB","price":144.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-upper-control-arm-bushing-set-w-pillowball-for-1994-2001-acura-integra-dc2-db7-d88-th-h303-pb-1213316919.jpg?v=1766911958"},{"product_id":"truhart-front-upper-control-arm-bushings-for-1988-1991-honda-civic-ef","title":"TruHart Front Upper Control Arm Bushings for 1988-1991 Honda Civic (EF)","description":"\u003cp\u003eA Set of Hardened Rubber Replacement Bushings for the Front Upper Control Arms (Camber Control Arms) designed for 1988-1991 Honda Civic (EF) models. These bushings offer stiffer, more durable performance compared to stock rubber, helping maintain alignment under load and improving steering precision without the harshness of full spherical bearings.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUse of hardened rubber material instead of soft stock bushings, for reduced deflection and longer service life.\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant metal finish to prevent rust and degradation of outer shell surfaces.\u003c\/li\u003e\n\u003cli\u003ePreserves suspension geometry while offering better control during cornering, braking, acceleration.\u003c\/li\u003e\n\u003cli\u003eModerate upgrade: stiffer feel without going to pillowball\/spherical bushings (retains more NVH damping than full metal joints).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H303-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eControl Arm Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1988-1991 Honda Civic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eEF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1988 Honda Civic (EF)\u003c\/li\u003e\n\u003cli\u003e1989 Honda Civic (EF)\u003c\/li\u003e\n\u003cli\u003e1990 Honda Civic (EF)\u003c\/li\u003e\n\u003cli\u003e1991 Honda Civic (EF)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544886116412,"sku":"TH-H303-1","price":58.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-upper-control-arm-bushings-for-1988-1991-honda-civic-ef-th-h303-1-1213316920.jpg?v=1766911898"},{"product_id":"truhart-front-upper-control-arm-bushings-for-1988-1991-honda-crx-ef","title":"TruHart Front Upper Control Arm Bushings for 1988-1991 Honda CR-X (EF)","description":"\u003cp\u003eA Set of Hardened Rubber Replacement Bushings for the Front Upper Control Arms (Camber Control Arms) designed for 1988-1991 Honda CR-X (EF) models. These bushings offer stiffer, more durable performance compared to stock rubber, helping maintain alignment under load and improving steering precision without the harshness of full spherical bearings.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUse of hardened rubber material instead of soft stock bushings, for reduced deflection and longer service life.\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant metal finish to prevent rust and degradation of outer shell surfaces.\u003c\/li\u003e\n\u003cli\u003ePreserves suspension geometry while offering better control during cornering, braking, acceleration.\u003c\/li\u003e\n\u003cli\u003eModerate upgrade: stiffer feel without going to pillowball\/spherical bushings (retains more NVH damping than full metal joints).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H303-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eControl Arm Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1988-1991 Honda CR-X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eEF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1988 Honda CR-X (EF)\u003c\/li\u003e\n\u003cli\u003e1989 Honda CR-X (EF)\u003c\/li\u003e\n\u003cli\u003e1990 Honda CR-X (EF)\u003c\/li\u003e\n\u003cli\u003e1991 Honda CR-X (EF)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544886345788,"sku":"TH-H303-1","price":58.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-upper-control-arm-bushings-for-1988-1991-honda-crx-ef-th-h303-1-1213316921.jpg?v=1766911870"},{"product_id":"truhart-front-upper-control-arm-bushings-for-1990-1993-acura-integra-da","title":"TruHart Front Upper Control Arm Bushings for 1990-1993 Acura Integra (DA)","description":"\u003cp\u003eA Set of Hardened Rubber Replacement Bushings for the Front Upper Control Arms (Camber Control Arms) designed for 1990-1993 Acura Integra (DA) models. These bushings offer stiffer, more durable performance compared to stock rubber, helping maintain alignment under load and improving steering precision without the harshness of full spherical bearings.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUse of hardened rubber material instead of soft stock bushings, for reduced deflection and longer service life.\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant metal finish to prevent rust and degradation of outer shell surfaces.\u003c\/li\u003e\n\u003cli\u003ePreserves suspension geometry while offering better control during cornering, braking, acceleration.\u003c\/li\u003e\n\u003cli\u003eModerate upgrade: stiffer feel without going to pillowball\/spherical bushings (retains more NVH damping than full metal joints).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H303-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eControl Arm Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1990-1993 Acura Integra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eDA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1990 Acura Integra (DA)\u003c\/li\u003e\n\u003cli\u003e1991 Acura Integra (DA)\u003c\/li\u003e\n\u003cli\u003e1992 Acura Integra (DA)\u003c\/li\u003e\n\u003cli\u003e1993 Acura Integra (DA)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544886476860,"sku":"TH-H303-1","price":58.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-upper-control-arm-bushings-for-1990-1993-acura-integra-da-th-h303-1-1213316922.jpg?v=1766911838"},{"product_id":"truhart-front-upper-control-arm-bushings-for-1992-1995-honda-civic-eg","title":"TruHart Front Upper Control Arm Bushings for 1992-1995 Honda Civic (EG)","description":"\u003cp\u003eAn Upgraded Replacement Set of Hardened Rubber Bushings for the Front Upper Control Arms (Camber Control Arms) of 1992-1995 Honda Civic (EG). Designed to be a direct replacement for the original factory rubber bushings, these provide improved durability, reduced flex compared to softer OE rubber, and better maintenance of alignment under load and spirited driving.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHardened (stiffer) rubber material for increased durability and reduced deflection compared to stock bushings.\u003c\/li\u003e\n\u003cli\u003eCorrosion?resistant zinc finish on metal components to help resist rust and extend service life.\u003c\/li\u003e\n\u003cli\u003eDirect replacement of OE bushings - installs into the stock control arm without requiring replacement of the arm itself.\u003c\/li\u003e\n\u003cli\u003eImproved handling response: stiffer rubber helps maintain front suspension geometry under moderate loads and cornering, giving more precise feel.\u003c\/li\u003e\n\u003cli\u003eMore consistent performance over time compared to softer\/original rubber bushings, especially under harsher or more demanding driving.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H303\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eControl Arm Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1992-1995 Honda Civic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eEG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1992 Honda Civic (EG)\u003c\/li\u003e\n\u003cli\u003e1993 Honda Civic (EG)\u003c\/li\u003e\n\u003cli\u003e1994 Honda Civic (EG)\u003c\/li\u003e\n\u003cli\u003e1995 Honda Civic (EG)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544886575164,"sku":"TH-H303","price":58.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-upper-control-arm-bushings-for-1992-1995-honda-civic-eg-th-h303-1213316923.jpg?v=1766911810"},{"product_id":"truhart-front-upper-control-arm-bushings-for-1994-2001-acura-integra-dc2db7d88","title":"TruHart Front Upper Control Arm Bushings for 1994-2001 Acura Integra (DC2\/DB7\/D88)","description":"\u003cp\u003eAn Upgraded Replacement Set of Hardened Rubber Bushings for the Front Upper Control Arms (Camber Control Arms) of 1994-2001 Acura Integra (DC2\/DB7\/D88). Designed to be a direct replacement for the original factory rubber bushings, these provide improved durability, reduced flex compared to softer OE rubber, and better maintenance of alignment under load and spirited driving.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHardened (stiffer) rubber material for increased durability and reduced deflection compared to stock bushings.\u003c\/li\u003e\n\u003cli\u003eCorrosion?resistant zinc finish on metal components to help resist rust and extend service life.\u003c\/li\u003e\n\u003cli\u003eDirect replacement of OE bushings - installs into the stock control arm without requiring replacement of the arm itself.\u003c\/li\u003e\n\u003cli\u003eImproved handling response: stiffer rubber helps maintain front suspension geometry under moderate loads and cornering, giving more precise feel.\u003c\/li\u003e\n\u003cli\u003eMore consistent performance over time compared to softer\/original rubber bushings, especially under harsher or more demanding driving.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H303\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eControl Arm Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1994-2001 Acura Integra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eDC2\/DB7\/D88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1994 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1995 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1996 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1997 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1998 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1999 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e2000 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e2001 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544886673468,"sku":"TH-H303","price":58.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-upper-control-arm-bushings-for-1994-2001-acura-integra-dc2-db7-d88-th-h303-1213316924.jpg?v=1766911777"},{"product_id":"truhart-front-upper-control-arm-pillowball-bushing-kit-for-1988-1991-honda-civic-ef","title":"TruHart Front Upper Control Arm Pillowball Bushing Kit for 1988-1991 Honda Civic (EF)","description":"\u003cp\u003eA Set of Front Upper Control Arm Pillowball Bushings for your 1988-1991 Honda Civic (EF) designed to replace the factory rubber bushings, offering improved durability, sharper handling and more precise steering response by reducing flex and deflection through the use of spherical pillowball bearings.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpherical pillowball bearings: higher precision, better feedback, reduced bushing deflection vs rubber.\u003c\/li\u003e\n\u003cli\u003eMatched to older Civic\/CRX\/Integra front upper control arm mounting points.\u003c\/li\u003e\n\u003cli\u003eBuilt to handle more stress than OE rubber bushings - better for performance, handling. (Inferred from pillowball \/ TruHart’s product line)\u003c\/li\u003e\n\u003cli\u003eReplacing compliance in rubber with stiff spherical bearing helps steering feel more direct.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H303-1-PB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eControl Arm Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1988-1991 Honda Civic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eEF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1988 Honda Civic (EF)\u003c\/li\u003e\n\u003cli\u003e1989 Honda Civic (EF)\u003c\/li\u003e\n\u003cli\u003e1990 Honda Civic (EF)\u003c\/li\u003e\n\u003cli\u003e1991 Honda Civic (EF)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544886739004,"sku":"TH-H303-1-PB","price":144.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-upper-control-arm-pillowball-bushing-kit-for-1988-1991-honda-civic-ef-th-h303-1-pb-1213316925.jpg?v=1766911750"},{"product_id":"truhart-front-upper-control-arm-pillowball-bushing-kit-for-1988-1991-honda-crx-ef","title":"TruHart Front Upper Control Arm Pillowball Bushing Kit for 1988-1991 Honda CR-X (EF)","description":"\u003cp\u003eA Set of Front Upper Control Arm Pillowball Bushings for your 1988-1991 Honda CR-X (EF) designed to replace the factory rubber bushings, offering improved durability, sharper handling and more precise steering response by reducing flex and deflection through the use of spherical pillowball bearings.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpherical pillowball bearings: higher precision, better feedback, reduced bushing deflection vs rubber.\u003c\/li\u003e\n\u003cli\u003eMatched to older Civic\/CRX\/Integra front upper control arm mounting points.\u003c\/li\u003e\n\u003cli\u003eBuilt to handle more stress than OE rubber bushings - better for performance, handling. (Inferred from pillowball \/ TruHart’s product line)\u003c\/li\u003e\n\u003cli\u003eReplacing compliance in rubber with stiff spherical bearing helps steering feel more direct.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H303-1-PB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eControl Arm Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1988-1991 Honda CR-X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eEF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1988 Honda CR-X (EF)\u003c\/li\u003e\n\u003cli\u003e1989 Honda CR-X (EF)\u003c\/li\u003e\n\u003cli\u003e1990 Honda CR-X (EF)\u003c\/li\u003e\n\u003cli\u003e1991 Honda CR-X (EF)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544887001148,"sku":"TH-H303-1-PB","price":144.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-upper-control-arm-pillowball-bushing-kit-for-1988-1991-honda-crx-ef-th-h303-1-pb-1213316926.jpg?v=1766911718"},{"product_id":"truhart-front-upper-control-arm-pillowball-bushing-kit-for-1990-1993-acura-integra-da","title":"TruHart Front Upper Control Arm Pillowball Bushing Kit for 1990-1993 Acura Integra (DA)","description":"\u003cp\u003eA Set of Front Upper Control Arm Pillowball Bushings for your 1990-1993 Acura Integra (DA) designed to replace the factory rubber bushings, offering improved durability, sharper handling and more precise steering response by reducing flex and deflection through the use of spherical pillowball bearings.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpherical pillowball bearings: higher precision, better feedback, reduced bushing deflection vs rubber.\u003c\/li\u003e\n\u003cli\u003eMatched to older Civic\/CRX\/Integra front upper control arm mounting points.\u003c\/li\u003e\n\u003cli\u003eBuilt to handle more stress than OE rubber bushings - better for performance, handling. (Inferred from pillowball \/ TruHart’s product line)\u003c\/li\u003e\n\u003cli\u003eReplacing compliance in rubber with stiff spherical bearing helps steering feel more direct.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H303-1-PB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eControl Arm Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1990-1993 Acura Integra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eDA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1990 Acura Integra (DA)\u003c\/li\u003e\n\u003cli\u003e1991 Acura Integra (DA)\u003c\/li\u003e\n\u003cli\u003e1992 Acura Integra (DA)\u003c\/li\u003e\n\u003cli\u003e1993 Acura Integra (DA)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544887099452,"sku":"TH-H303-1-PB","price":144.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-upper-control-arm-pillowball-bushing-kit-for-1990-1993-acura-integra-da-th-h303-1-pb-1213316927.jpg?v=1766911691"},{"product_id":"truhart-rear-knuckle-bushing-for-2017-2025-honda-civic-type-r-fk8fl5","title":"TruHart Rear Knuckle Bushing for 2017+ Honda Civic Type R (FK8\/FL5)","description":"\u003cp\u003eTruHart Rear Knuckle Pillowball Cushings for the 2017+ Honda Civic Type R (FK8\/FL5) replace your worn factory units with hardened rubber units reducing deflection and providing a more direct road feel\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTypically made from high-quality rubber or polyurethane materials, TruHart rear knuckle bushings are designed to resist wear and tear, ensuring long-lasting performance, even under aggressive driving conditions.\u003c\/li\u003e\n\u003cli\u003eBy replacing worn or weak OEM bushings, these bushings reduce flex and improve the responsiveness of your vehicle’s rear suspension, giving you a firmer and more direct feel while driving.\u003c\/li\u003e\n\u003cli\u003eThese bushings help maintain proper alignment in the rear knuckle, which is crucial for maintaining suspension geometry, reducing tire wear, and improving handling performance, especially after lowering or tuning the vehicle.\u003c\/li\u003e\n\u003cli\u003eTruHart’s bushings are often designed to absorb noise and vibration, offering a smoother and quieter ride compared to stock rubber bushings.\u003c\/li\u003e\n\u003cli\u003eOften a direct replacement for OEM bushings, installation is typically straightforward and can be done by enthusiasts with basic mechanical knowledge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H308\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eKnuckle Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2017+ Honda Civic Type R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eFK8\/FL5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2017 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2018 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2019 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2020 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2021 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2022 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2023 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2024 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2025 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2026 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544906268732,"sku":"TH-H308","price":139.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-rear-knuckle-bushing-for-2017-2025-honda-civic-type-r-fk8-fl5-th-h308-1213317072.jpg?v=1766897198"},{"product_id":"truhart-rear-stabilizer-links-for-1997-2007-subaru-impreza-gcgdgg","title":"TruHart Rear Stabilizer Links for 1997-2001 Subaru Impreza (GC\/GD\/GG)","description":"\u003cp\u003eTruHart End Link Set for the 1997-2001 Subaru Impreza (GC\/GD\/GG) are an ideal solution for upgraded swaybars. When you use thicker swaybars the OEM end links typically cannot hold up to additional strain the upgraded bar puts on the end link often breaking or bending them.\u003c\/p\u003e\u003cp\u003eThese end links will withstand the torture of upgraded swaybars but can also be used as an upgrade for OEM swaybars.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStabilizer links help reduce body roll during cornering, enhancing overall vehicle stability and control.\u003c\/li\u003e\n\u003cli\u003eMade from durable steel or aluminum with corrosion-resistant coatings, ensuring long-lasting performance even under harsh conditions.\u003c\/li\u003e\n\u003cli\u003eDesigned for exact fitment and optimal movement, minimizing play and providing consistent suspension response.\u003c\/li\u003e\n\u003cli\u003eUpgraded bushings or ball joints reduce noise and vibration while improving the responsiveness of the sway bar.\u003c\/li\u003e\n\u003cli\u003eTruHart stabilizer links are designed for easy installation with direct fit to OEM mounting points, making upgrades hassle-free.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-S303\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStabilizer Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1997-2001 Subaru Impreza\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eGC\/GD\/GG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1997 Subaru Impreza (GC\/GD\/GG)\u003c\/li\u003e\n\u003cli\u003e1998 Subaru Impreza (GC\/GD\/GG)\u003c\/li\u003e\n\u003cli\u003e1999 Subaru Impreza (GC\/GD\/GG)\u003c\/li\u003e\n\u003cli\u003e2000 Subaru Impreza (GC\/GD\/GG)\u003c\/li\u003e\n\u003cli\u003e2001 Subaru Impreza (GC\/GD\/GG)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544911806524,"sku":"TH-S303","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-rear-stabilizer-links-for-1997-2007-subaru-impreza-gc-gd-gg-th-s303-1213317123.jpg?v=1766895698"},{"product_id":"truhart-rear-trailing-arm-bushing-for-1988-2000-honda-civic-efegek","title":"TruHart Rear Trailing Arm Bushing for 1988-2000 Honda Civic (EF\/EG\/EK)","description":"\u003cp\u003eTruHart Trailing Arm Bushings for the 1988-2000 Honda Civic (EF\/EG\/EK) replace your worn factory units with hardened rubber units reducing deflection and providing a more direct road feel\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHardened rubber. True poly\/urethane or pillowballs are not in these particular “bushing†models (unless you buy upgraded trailing arms).\u003c\/li\u003e\n\u003cli\u003eReduces unwanted movement \/ deflection of trailing arm, improving rear stability.\u003c\/li\u003e\n\u003cli\u003eStiffer feel and better rear feedback (especially in corners \/ under acceleration \/ braking) compared to stock soft\/rubbery bushings.\u003c\/li\u003e\n\u003cli\u003eFairly inexpensive upgrade relative to full trailing arm replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eTrailing Arm Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1988-2000 Honda Civic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eEF\/EG\/EK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1988 Honda Civic (EF\/EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1989 Honda Civic (EF\/EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1990 Honda Civic (EF\/EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1991 Honda Civic (EF\/EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1992 Honda Civic (EF\/EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1993 Honda Civic (EF\/EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1994 Honda Civic (EF\/EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1995 Honda Civic (EF\/EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1996 Honda Civic (EF\/EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1997 Honda Civic (EF\/EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1998 Honda Civic (EF\/EG\/EK)\u003c\/li\u003e\n\u003cli\u003e1999 Honda Civic (EF\/EG\/EK)\u003c\/li\u003e\n\u003cli\u003e2000 Honda Civic (EF\/EG\/EK)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544920850492,"sku":"TH-H304","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-rear-trailing-arm-bushing-for-1988-2000-honda-civic-ef-eg-ek-th-h304-1213317204.jpg?v=1766891137"},{"product_id":"truhart-rear-trailing-arm-bushing-for-1994-2001-acura-integra-dc2db7d88","title":"TruHart Rear Trailing Arm Bushing for 1994-2001 Acura Integra (DC2\/DB7\/D88)","description":"\u003cp\u003eTruHart Trailing Arm Bushings for the 1994-2001 Acura Integra (DC2\/DB7\/D88) replace your worn factory units with hardened rubber units reducing deflection and providing a more direct road feel\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHardened rubber. True poly\/urethane or pillowballs are not in these particular “bushing†models (unless you buy upgraded trailing arms).\u003c\/li\u003e\n\u003cli\u003eReduces unwanted movement \/ deflection of trailing arm, improving rear stability.\u003c\/li\u003e\n\u003cli\u003eStiffer feel and better rear feedback (especially in corners \/ under acceleration \/ braking) compared to stock soft\/rubbery bushings.\u003c\/li\u003e\n\u003cli\u003eFairly inexpensive upgrade relative to full trailing arm replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eTrailing Arm Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1994-2001 Acura Integra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eDC2\/DB7\/D88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1994 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1995 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1996 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1997 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1998 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e1999 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e2000 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003cli\u003e2001 Acura Integra (DC2\/DB7\/D88)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544920916028,"sku":"TH-H304","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-rear-trailing-arm-bushing-for-1994-2001-acura-integra-dc2-db7-d88-th-h304-1213317205.jpg?v=1766891109"},{"product_id":"truhart-rear-trailing-arm-bushing-for-1997-2001-honda-cr-v-rd1rd2","title":"TruHart Rear Trailing Arm Bushing for 1997-2001 Honda CR-V (RD1\/RD2)","description":"\u003cp\u003eTruHart Trailing Arm Bushings for the 1997-2001 Honda CR-V (RD1\/RD2) replace your worn factory units with hardened rubber units reducing deflection and providing a more direct road feel\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHardened rubber. True poly\/urethane or pillowballs are not in these particular “bushing†models (unless you buy upgraded trailing arms).\u003c\/li\u003e\n\u003cli\u003eReduces unwanted movement \/ deflection of trailing arm, improving rear stability.\u003c\/li\u003e\n\u003cli\u003eStiffer feel and better rear feedback (especially in corners \/ under acceleration \/ braking) compared to stock soft\/rubbery bushings.\u003c\/li\u003e\n\u003cli\u003eFairly inexpensive upgrade relative to full trailing arm replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eTrailing Arm Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1997-2001 Honda CR-V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eRD1\/RD2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1997 Honda CR-V (RD1\/RD2)\u003c\/li\u003e\n\u003cli\u003e1998 Honda CR-V (RD1\/RD2)\u003c\/li\u003e\n\u003cli\u003e1999 Honda CR-V (RD1\/RD2)\u003c\/li\u003e\n\u003cli\u003e2000 Honda CR-V (RD1\/RD2)\u003c\/li\u003e\n\u003cli\u003e2001 Honda CR-V (RD1\/RD2)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544920981564,"sku":"TH-H304","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-rear-trailing-arm-bushing-for-1997-2001-honda-cr-v-rd1-rd2-th-h304-1213317206.jpg?v=1766891051"},{"product_id":"truhart-rear-trailing-arm-bushing-for-2016-2021-honda-civic-fcfk","title":"TruHart Rear Trailing Arm Bushing for 2016-2021 Honda Civic (FC\/FK)","description":"\u003cp\u003eTruHart Trailing Arm Bushings for the 2016-2021 Honda Civic (FC\/FK) replace your worn factory units with hardened rubber units reducing deflection and providing a more direct road feel\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHardened rubber. True poly\/urethane or pillowballs are not in these particular “bushing†models (unless you buy upgraded trailing arms).\u003c\/li\u003e\n\u003cli\u003eReduces unwanted movement \/ deflection of trailing arm, improving rear stability.\u003c\/li\u003e\n\u003cli\u003eStiffer feel and better rear feedback (especially in corners \/ under acceleration \/ braking) compared to stock soft\/rubbery bushings.\u003c\/li\u003e\n\u003cli\u003eFairly inexpensive upgrade relative to full trailing arm replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H309\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eTrailing Arm Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2016-2021 Honda Civic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eFC\/FK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2016 Honda Civic (FC\/FK)\u003c\/li\u003e\n\u003cli\u003e2017 Honda Civic (FC\/FK)\u003c\/li\u003e\n\u003cli\u003e2018 Honda Civic (FC\/FK)\u003c\/li\u003e\n\u003cli\u003e2019 Honda Civic (FC\/FK)\u003c\/li\u003e\n\u003cli\u003e2020 Honda Civic (FC\/FK)\u003c\/li\u003e\n\u003cli\u003e2021 Honda Civic (FC\/FK)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":43544921047100,"sku":"TH-H309","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-rear-trailing-arm-bushing-for-2016-2021-honda-civic-fc-fk-th-h309-1213317207.jpg?v=1766891078"},{"product_id":"truhart-aluminum-billet-shifter-bushings-for-1999-2000-honda-civic-si","title":"TruHart Aluminum Billet Shifter Bushings for 1999-2000 Honda Civic Si","description":"\u003cp\u003eThe Billet Aluminum Shifter Bushing Kit designed for improved shifting performance on Your 1999-2000 Honda Civic Si. It replaces the factory rubber bushings in the shifter assembly with solid billet aluminum components to reduce slop, improve precision, and give a more direct, crisp feel when shifting.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUses solid billet aluminum bushings - much stiffer than stock rubber for more precise shifting feel.\u003c\/li\u003e\n\u003cli\u003eInstalls in the stock shifter bushings’ location, using existing shifter linkage\/hardware.\u003c\/li\u003e\n\u003cli\u003eReduces binding and worn rubber flex, resulting in smoother, more direct and positive shift action.\u003c\/li\u003e\n\u003cli\u003eBillet aluminum resists wear and deformation better over time compared with rubber - less maintenance and longer life.\u003c\/li\u003e\n\u003cli\u003ePolished or natural aluminum finish for visual appeal in the shifter linkage area; more premium look over stock rubber bushings.\u003c\/li\u003e\n\u003cli\u003eBacked by TruHart’s standard warranty for non-OE parts (2 years in many cases) when used as intended.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H302-AL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eShifter Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1999-2000 Honda Civic Si\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061 T6 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1999 Honda Civic Si\u003c\/li\u003e\n\u003cli\u003e2000 Honda Civic Si\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":46215032995900,"sku":"TH-H302-AL","price":40.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-aluminum-billet-shifter-bushings-for-1999-2000-honda-civic-ek-th-h302-al-1213316857.jpg?v=1766913791"},{"product_id":"truhart-rear-trailing-arm-bushing-for-2017-2021-honda-civic-type-r-fk8-fl5","title":"TruHart Rear Trailing Arm Bushing for 2017-2021 Honda Civic Type R (FK8\/FL5)","description":"\u003cp\u003eTruHart Trailing Arm Bushings for the 2017-2021 Honda Civic Type R (FK8\/FL5) replace your worn factory units with hardened rubber units reducing deflection and providing a more direct road feel\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHardened rubber. True poly\/urethane or pillowballs are not in these particular “bushing†models (unless you buy upgraded trailing arms).\u003c\/li\u003e\n\u003cli\u003eReduces unwanted movement \/ deflection of trailing arm, improving rear stability.\u003c\/li\u003e\n\u003cli\u003eStiffer feel and better rear feedback (especially in corners \/ under acceleration \/ braking) compared to stock soft\/rubbery bushings.\u003c\/li\u003e\n\u003cli\u003eFairly inexpensive upgrade relative to full trailing arm replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H309\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eTrailing Arm Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2017-2021 Honda Civic Type R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eFK8\/FL5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2017 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2018 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2019 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2020 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003cli\u003e2021 Honda Civic Type R (FK8\/FL5)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":46215033192508,"sku":"TH-H309","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-rear-trailing-arm-bushing-for-2016-2021-honda-civic-fc-fk-th-h309-1213317207.jpg?v=1766891078"},{"product_id":"truhart-rear-trailing-arm-bushing-for-2017-2020-honda-civic-si-fc1-fc3","title":"TruHart Rear Trailing Arm Bushing for 2017-2020 Honda Civic Si (FC1\/FC3)","description":"\u003cp\u003eTruHart Trailing Arm Bushings for the 2017-2020 Honda Civic Si (FC1\/FC3) replace your worn factory units with hardened rubber units reducing deflection and providing a more direct road feel\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHardened rubber. True poly\/urethane or pillowballs are not in these particular “bushing†models (unless you buy upgraded trailing arms).\u003c\/li\u003e\n\u003cli\u003eReduces unwanted movement \/ deflection of trailing arm, improving rear stability.\u003c\/li\u003e\n\u003cli\u003eStiffer feel and better rear feedback (especially in corners \/ under acceleration \/ braking) compared to stock soft\/rubbery bushings.\u003c\/li\u003e\n\u003cli\u003eFairly inexpensive upgrade relative to full trailing arm replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H309\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eTrailing Arm Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2017-2020 Honda Civic Si\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eFC1\/FC3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2017 Honda Civic Si (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2018 Honda Civic Si (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2019 Honda Civic Si (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2020 Honda Civic Si (FC1\/FC3)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":46215033258044,"sku":"TH-H309","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-rear-trailing-arm-bushing-for-2016-2021-honda-civic-fc-fk-th-h309-1213317207.jpg?v=1766891078"},{"product_id":"truhart-front-roll-center-adjusters-for-2002-2005-honda-civic-si","title":"TruHart Front Roll Center Adjusters for 2002-2005 Honda Civic Si","description":"\u003cp\u003eWhen you Lower a Vehicle for the 2002-2005 Honda Civic Si the geometry of the suspension is altered. The increased length of the TruHart Roll Center Adjusters repositions and corrects the position of the front hub and lower control arms.\u003c\/p\u003e\u003cp\u003eThe result is corrected suspension geometry improving steering response, handling, tire contact patch, and makes alignments more consistent.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThese adjusters are not height adjustable or dynamic; once installed they hold a fixed geometry correction.\u003c\/li\u003e\n\u003cli\u003eMade from durable materials, often anodized or finished for corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eBetter steering response and more predictable handling (especially when cornering) because the front suspension’s geometry is more correct under lowered conditions.\u003c\/li\u003e\n\u003cli\u003eLess change in camber \/ toe under load or suspension travel, since roll center is less “moved†by lowering.\u003c\/li\u003e\n\u003cli\u003eImproved tire contact patch (better grip, less uneven wear) due to more optimal hub \/ arm positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H602\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eRoll Center Adjusters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2002-2005 Honda Civic Si\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2002 Honda Civic Si\u003c\/li\u003e\n\u003cli\u003e2003 Honda Civic Si\u003c\/li\u003e\n\u003cli\u003e2004 Honda Civic Si\u003c\/li\u003e\n\u003cli\u003e2005 Honda Civic Si\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":46215035125820,"sku":"TH-H602","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-roll-center-adjusters-for-2001-2005-honda-civic-es-th-h602-1213316907.jpg?v=1766912291"},{"product_id":"truhart-front-stabilizer-links-for-2002-2007-subaru-wrx-gd-gg","title":"TruHart Front Stabilizer Links for 2002-2007 Subaru WRX (GD\/GG)","description":"\u003cp\u003eTruHart End Link Set for the 2002-2007 Subaru WRX (GD\/GG) are an ideal solution for upgraded swaybars. When you use thicker swaybars the OEM end links typically cannot hold up to additional strain the upgraded bar puts on the end link often breaking or bending them.\u003c\/p\u003e\u003cp\u003eThese end links will withstand the torture of upgraded swaybars but can also be used as an upgrade for OEM swaybars.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStabilizer links help reduce body roll during cornering, enhancing overall vehicle stability and control.\u003c\/li\u003e\n\u003cli\u003eMade from durable steel or aluminum with corrosion-resistant coatings, ensuring long-lasting performance even under harsh conditions.\u003c\/li\u003e\n\u003cli\u003eDesigned for exact fitment and optimal movement, minimizing play and providing consistent suspension response.\u003c\/li\u003e\n\u003cli\u003eUpgraded bushings or ball joints reduce noise and vibration while improving the responsiveness of the sway bar.\u003c\/li\u003e\n\u003cli\u003eTruHart stabilizer links are designed for easy installation with direct fit to OEM mounting points, making upgrades hassle-free.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-S302\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStabilizer Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2002-2007 Subaru WRX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eGD\/GG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2002 Subaru WRX (GD\/GG)\u003c\/li\u003e\n\u003cli\u003e2003 Subaru WRX (GD\/GG)\u003c\/li\u003e\n\u003cli\u003e2004 Subaru WRX (GD\/GG)\u003c\/li\u003e\n\u003cli\u003e2005 Subaru WRX (GD\/GG)\u003c\/li\u003e\n\u003cli\u003e2006 Subaru WRX (GD\/GG)\u003c\/li\u003e\n\u003cli\u003e2007 Subaru WRX (GD\/GG)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":46215102070844,"sku":"TH-S302","price":112.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-stabilizer-links-for-1993-2007-subaru-impreza-gc-gd-gg-th-s302-1213316912.jpg?v=1766912138"},{"product_id":"truhart-rear-knuckle-bushing-for-2017-honda-civic-si-fc1-fc3","title":"TruHart Rear Knuckle Bushing for 2017+ Honda Civic Si (FC1\/FC3)","description":"\u003cp\u003eTruHart Rear Knuckle Pillowball Cushings for the 2017+ Honda Civic Si (FC1\/FC3) replace your worn factory units with hardened rubber units reducing deflection and providing a more direct road feel\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTypically made from high-quality rubber or polyurethane materials, TruHart rear knuckle bushings are designed to resist wear and tear, ensuring long-lasting performance, even under aggressive driving conditions.\u003c\/li\u003e\n\u003cli\u003eBy replacing worn or weak OEM bushings, these bushings reduce flex and improve the responsiveness of your vehicle’s rear suspension, giving you a firmer and more direct feel while driving.\u003c\/li\u003e\n\u003cli\u003eThese bushings help maintain proper alignment in the rear knuckle, which is crucial for maintaining suspension geometry, reducing tire wear, and improving handling performance, especially after lowering or tuning the vehicle.\u003c\/li\u003e\n\u003cli\u003eTruHart’s bushings are often designed to absorb noise and vibration, offering a smoother and quieter ride compared to stock rubber bushings.\u003c\/li\u003e\n\u003cli\u003eOften a direct replacement for OEM bushings, installation is typically straightforward and can be done by enthusiasts with basic mechanical knowledge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H308\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eKnuckle Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2017+ Honda Civic Si\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eFC1\/FC3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2017 Honda Civic Si (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2018 Honda Civic Si (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2019 Honda Civic Si (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2020 Honda Civic Si (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2021 Honda Civic Si (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2022 Honda Civic Si (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2023 Honda Civic Si (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2024 Honda Civic Si (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2025 Honda Civic Si (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2026 Honda Civic Si (FC1\/FC3)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":46215137361980,"sku":"TH-H308","price":139.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-rear-knuckle-bushing-for-2017-2025-honda-civic-type-r-fk8-fl5-th-h308-1213317072.jpg?v=1766897198"},{"product_id":"truhart-rear-knuckle-bushing-for-2016-honda-civic-fc1-fc3","title":"TruHart Rear Knuckle Bushing for 2016+ Honda Civic (FC1\/FC3)","description":"\u003cp\u003eTruHart Rear Knuckle Pillowball Cushings for the 2016+ Honda Civic (FC1\/FC3) replace your worn factory units with hardened rubber units reducing deflection and providing a more direct road feel\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTypically made from high-quality rubber or polyurethane materials, TruHart rear knuckle bushings are designed to resist wear and tear, ensuring long-lasting performance, even under aggressive driving conditions.\u003c\/li\u003e\n\u003cli\u003eBy replacing worn or weak OEM bushings, these bushings reduce flex and improve the responsiveness of your vehicle’s rear suspension, giving you a firmer and more direct feel while driving.\u003c\/li\u003e\n\u003cli\u003eThese bushings help maintain proper alignment in the rear knuckle, which is crucial for maintaining suspension geometry, reducing tire wear, and improving handling performance, especially after lowering or tuning the vehicle.\u003c\/li\u003e\n\u003cli\u003eTruHart’s bushings are often designed to absorb noise and vibration, offering a smoother and quieter ride compared to stock rubber bushings.\u003c\/li\u003e\n\u003cli\u003eOften a direct replacement for OEM bushings, installation is typically straightforward and can be done by enthusiasts with basic mechanical knowledge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H308\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eKnuckle Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2016+ Honda Civic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eFC1\/FC3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2016 Honda Civic (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2017 Honda Civic (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2018 Honda Civic (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2019 Honda Civic (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2020 Honda Civic (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2021 Honda Civic (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2022 Honda Civic (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2023 Honda Civic (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2024 Honda Civic (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2025 Honda Civic (FC1\/FC3)\u003c\/li\u003e\n\u003cli\u003e2026 Honda Civic (FC1\/FC3)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":46215137525820,"sku":"TH-H308","price":139.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-rear-knuckle-bushing-for-2017-2025-honda-civic-type-r-fk8-fl5-th-h308-1213317072.jpg?v=1766897198"},{"product_id":"truhart-rear-knuckle-bushing-for-2023-acura-integra-de4","title":"TruHart Rear Knuckle Bushing for 2023+ Acura Integra (DE4)","description":"\u003cp\u003eTruHart Rear Knuckle Pillowball Cushings for the 2023+ Acura Integra (DE4) replace your worn factory units with hardened rubber units reducing deflection and providing a more direct road feel\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTypically made from high-quality rubber or polyurethane materials, TruHart rear knuckle bushings are designed to resist wear and tear, ensuring long-lasting performance, even under aggressive driving conditions.\u003c\/li\u003e\n\u003cli\u003eBy replacing worn or weak OEM bushings, these bushings reduce flex and improve the responsiveness of your vehicle’s rear suspension, giving you a firmer and more direct feel while driving.\u003c\/li\u003e\n\u003cli\u003eThese bushings help maintain proper alignment in the rear knuckle, which is crucial for maintaining suspension geometry, reducing tire wear, and improving handling performance, especially after lowering or tuning the vehicle.\u003c\/li\u003e\n\u003cli\u003eTruHart’s bushings are often designed to absorb noise and vibration, offering a smoother and quieter ride compared to stock rubber bushings.\u003c\/li\u003e\n\u003cli\u003eOften a direct replacement for OEM bushings, installation is typically straightforward and can be done by enthusiasts with basic mechanical knowledge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H308\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eKnuckle Bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2023+ Acura Integra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eDE4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2023 Acura Integra (DE4)\u003c\/li\u003e\n\u003cli\u003e2024 Acura Integra (DE4)\u003c\/li\u003e\n\u003cli\u003e2025 Acura Integra (DE4)\u003c\/li\u003e\n\u003cli\u003e2026 Acura Integra (DE4)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":46215137558588,"sku":"TH-H308","price":139.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-rear-knuckle-bushing-for-2017-2025-honda-civic-type-r-fk8-fl5-th-h308-1213317072.jpg?v=1766897198"},{"product_id":"truhart-front-roll-center-adjusters-for-2015-2020-acura-tlx-ub1-ub2","title":"TruHart Front Roll Center Adjusters for 2015-2020 Acura TLX (UB1\/UB2)","description":"\u003cp\u003eWhen you Lower a Vehicle for the 2015-2020 Acura TLX (UB1\/UB2) the geometry of the suspension is altered. The increased length of the TruHart Roll Center Adjusters repositions and corrects the position of the front hub and lower control arms.\u003c\/p\u003e\u003cp\u003eThe result is corrected suspension geometry improving steering response, handling, tire contact patch, and makes alignments more consistent.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThese adjusters are not height adjustable or dynamic; once installed they hold a fixed geometry correction.\u003c\/li\u003e\n\u003cli\u003eMade from durable materials, often anodized or finished for corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eBetter steering response and more predictable handling (especially when cornering) because the front suspension’s geometry is more correct under lowered conditions.\u003c\/li\u003e\n\u003cli\u003eLess change in camber \/ toe under load or suspension travel, since roll center is less “moved†by lowering.\u003c\/li\u003e\n\u003cli\u003eImproved tire contact patch (better grip, less uneven wear) due to more optimal hub \/ arm positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H613\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eRoll Center Adjusters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2015-2020 Acura TLX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eUB1\/UB2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2015 Acura TLX (UB1\/UB2)\u003c\/li\u003e\n\u003cli\u003e2016 Acura TLX (UB1\/UB2)\u003c\/li\u003e\n\u003cli\u003e2017 Acura TLX (UB1\/UB2)\u003c\/li\u003e\n\u003cli\u003e2018 Acura TLX (UB1\/UB2)\u003c\/li\u003e\n\u003cli\u003e2019 Acura TLX (UB1\/UB2)\u003c\/li\u003e\n\u003cli\u003e2020 Acura TLX (UB1\/UB2)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":46215138017340,"sku":"TH-H613","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-roll-center-adjusters-for-2017-2025-honda-civic-type-r-fk8-fl5-th-h613-1213316911.jpg?v=1766912170"},{"product_id":"truhart-front-roll-center-adjusters-for-2024-acura-integra-de4","title":"TruHart Front Roll Center Adjusters for 2024+ Acura Integra (DE4)","description":"\u003cp\u003eWhen you Lower a Vehicle for the 2024+ Acura Integra (DE4) the geometry of the suspension is altered. The increased length of the TruHart Roll Center Adjusters repositions and corrects the position of the front hub and lower control arms.\u003c\/p\u003e\u003cp\u003eThe result is corrected suspension geometry improving steering response, handling, tire contact patch, and makes alignments more consistent.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThese adjusters are not height adjustable or dynamic; once installed they hold a fixed geometry correction.\u003c\/li\u003e\n\u003cli\u003eMade from durable materials, often anodized or finished for corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eBetter steering response and more predictable handling (especially when cornering) because the front suspension’s geometry is more correct under lowered conditions.\u003c\/li\u003e\n\u003cli\u003eLess change in camber \/ toe under load or suspension travel, since roll center is less “moved†by lowering.\u003c\/li\u003e\n\u003cli\u003eImproved tire contact patch (better grip, less uneven wear) due to more optimal hub \/ arm positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-H613\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eRoll Center Adjusters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2024+ Acura Integra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eDE4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2024 Acura Integra (DE4)\u003c\/li\u003e\n\u003cli\u003e2025 Acura Integra (DE4)\u003c\/li\u003e\n\u003cli\u003e2026 Acura Integra (DE4)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":46215138050108,"sku":"TH-H613","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-front-roll-center-adjusters-for-2017-2025-honda-civic-type-r-fk8-fl5-th-h613-1213316911.jpg?v=1766912170"},{"product_id":"truhart-rear-stabilizer-links-for-2002-2007-subaru-wrx-gd-gg","title":"TruHart Rear Stabilizer Links for 2002-2007 Subaru WRX (GD\/GG)","description":"\u003cp\u003eTruHart End Link Set for the 2002-2007 Subaru WRX (GD\/GG) are an ideal solution for upgraded swaybars. When you use thicker swaybars the OEM end links typically cannot hold up to additional strain the upgraded bar puts on the end link often breaking or bending them.\u003c\/p\u003e\u003cp\u003eThese end links will withstand the torture of upgraded swaybars but can also be used as an upgrade for OEM swaybars.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStabilizer links help reduce body roll during cornering, enhancing overall vehicle stability and control.\u003c\/li\u003e\n\u003cli\u003eMade from durable steel or aluminum with corrosion-resistant coatings, ensuring long-lasting performance even under harsh conditions.\u003c\/li\u003e\n\u003cli\u003eDesigned for exact fitment and optimal movement, minimizing play and providing consistent suspension response.\u003c\/li\u003e\n\u003cli\u003eUpgraded bushings or ball joints reduce noise and vibration while improving the responsiveness of the sway bar.\u003c\/li\u003e\n\u003cli\u003eTruHart stabilizer links are designed for easy installation with direct fit to OEM mounting points, making upgrades hassle-free.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-S303\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStabilizer Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2002-2007 Subaru WRX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eGD\/GG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2002 Subaru WRX (GD\/GG)\u003c\/li\u003e\n\u003cli\u003e2003 Subaru WRX (GD\/GG)\u003c\/li\u003e\n\u003cli\u003e2004 Subaru WRX (GD\/GG)\u003c\/li\u003e\n\u003cli\u003e2005 Subaru WRX (GD\/GG)\u003c\/li\u003e\n\u003cli\u003e2006 Subaru WRX (GD\/GG)\u003c\/li\u003e\n\u003cli\u003e2007 Subaru WRX (GD\/GG)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":46215148994620,"sku":"TH-S303","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-rear-stabilizer-links-for-1997-2007-subaru-impreza-gc-gd-gg-th-s303-1213317123.jpg?v=1766895698"},{"product_id":"truhart-rear-stabilizer-links-for-2004-2007-subaru-wrx-sti-gd","title":"TruHart Rear Stabilizer Links for 2004-2007 Subaru WRX STI (GD)","description":"\u003cp\u003eTruHart End Link Set for the 2004-2007 Subaru WRX STI (GD) are an ideal solution for upgraded swaybars. When you use thicker swaybars the OEM end links typically cannot hold up to additional strain the upgraded bar puts on the end link often breaking or bending them.\u003c\/p\u003e\u003cp\u003eThese end links will withstand the torture of upgraded swaybars but can also be used as an upgrade for OEM swaybars.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStabilizer links help reduce body roll during cornering, enhancing overall vehicle stability and control.\u003c\/li\u003e\n\u003cli\u003eMade from durable steel or aluminum with corrosion-resistant coatings, ensuring long-lasting performance even under harsh conditions.\u003c\/li\u003e\n\u003cli\u003eDesigned for exact fitment and optimal movement, minimizing play and providing consistent suspension response.\u003c\/li\u003e\n\u003cli\u003eUpgraded bushings or ball joints reduce noise and vibration while improving the responsiveness of the sway bar.\u003c\/li\u003e\n\u003cli\u003eTruHart stabilizer links are designed for easy installation with direct fit to OEM mounting points, making upgrades hassle-free.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTH-S303\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStabilizer Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2004-2007 Subaru WRX STI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlacement\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eGD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2004 Subaru WRX STI (GD)\u003c\/li\u003e\n\u003cli\u003e2005 Subaru WRX STI (GD)\u003c\/li\u003e\n\u003cli\u003e2006 Subaru WRX STI (GD)\u003c\/li\u003e\n\u003cli\u003e2007 Subaru WRX STI (GD)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TruHart","offers":[{"title":"Default Title","offer_id":46215149027388,"sku":"TH-S303","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/files\/truhart-rear-stabilizer-links-for-1997-2007-subaru-impreza-gc-gd-gg-th-s303-1213317123.jpg?v=1766895698"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/collections\/collection_steering-bushings.jpg?v=1729553030","url":"https:\/\/www.springrates.com\/collections\/steering-bushings.oembed?page=3","provider":"SPRINGRATES","version":"1.0","type":"link"}