{"title":"Stance Coilovers","description":"","products":[{"product_id":"stance-xr1-coilovers-2000-2009-honda-s2000","title":"Stance XR1 Coilovers for 2000-2009 Honda S2000 (AP1\/AP2)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2000-2009 Honda S2000 (AP1\/AP2) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your AP1\/AP2 Honda S2000 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2000-2009 Honda S2000.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2000-2009 Honda S2000 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your AP1\/AP2 Honda S2000 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the AP1\/AP2 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the AP1\/AP2 Honda S2000 chassis so the coilovers bolt onto your 2000-2009 Honda S2000 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your AP1\/AP2 Honda S2000.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-AP1-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2000-2009 Honda S2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eAP1\/AP2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e11 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e9 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2000 Honda S2000 RWD (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2001 Honda S2000 RWD (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2002 Honda S2000 RWD (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2003 Honda S2000 RWD (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2004 Honda S2000 RWD (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2005 Honda S2000 RWD (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2006 Honda S2000 RWD (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2007 Honda S2000 RWD (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2008 Honda S2000 RWD (AP1\/AP2)\u003c\/li\u003e\n\u003cli\u003e2009 Honda S2000 RWD (AP1\/AP2)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184967430204,"sku":"ST-AP1-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2000-2009-honda-s2000-ap1-ap2-st-ap1-xr1-1194427401.jpg?v=1768243659"},{"product_id":"stance-xr1-coilovers-1990-2005-acura-nsx","title":"Stance XR1 Coilovers for 1990-2005 Acura NSX (NA1\/NA2)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1990-2005 Acura NSX (NA1\/NA2) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your NA1\/NA2 Acura NSX — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1990-2005 Acura NSX.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1990-2005 Acura NSX for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your NA1\/NA2 Acura NSX on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the NA1\/NA2 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the NA1\/NA2 Acura NSX chassis so the coilovers bolt onto your 1990-2005 Acura NSX ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your NA1\/NA2 Acura NSX.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-NSX-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1990-2005 Acura NSX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eNA1\/NA2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e11 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1990 Acura NSX RWD (NA1\/NA2)\u003c\/li\u003e\n\u003cli\u003e1991 Acura NSX RWD (NA1\/NA2)\u003c\/li\u003e\n\u003cli\u003e1992 Acura NSX RWD (NA1\/NA2)\u003c\/li\u003e\n\u003cli\u003e1993 Acura NSX RWD (NA1\/NA2)\u003c\/li\u003e\n\u003cli\u003e1994 Acura NSX RWD (NA1\/NA2)\u003c\/li\u003e\n\u003cli\u003e1995 Acura NSX RWD (NA1\/NA2)\u003c\/li\u003e\n\u003cli\u003e1996 Acura NSX RWD (NA1\/NA2)\u003c\/li\u003e\n\u003cli\u003e1997 Acura NSX RWD (NA1\/NA2)\u003c\/li\u003e\n\u003cli\u003e1998 Acura NSX RWD (NA1\/NA2)\u003c\/li\u003e\n\u003cli\u003e1999 Acura NSX RWD (NA1\/NA2)\u003c\/li\u003e\n\u003cli\u003e2000 Acura NSX RWD (NA1\/NA2)\u003c\/li\u003e\n\u003cli\u003e2001 Acura NSX RWD (NA1\/NA2)\u003c\/li\u003e\n\u003cli\u003e2002 Acura NSX RWD (NA1\/NA2)\u003c\/li\u003e\n\u003cli\u003e2003 Acura NSX RWD (NA1\/NA2)\u003c\/li\u003e\n\u003cli\u003e2004 Acura NSX RWD (NA1\/NA2)\u003c\/li\u003e\n\u003cli\u003e2005 Acura NSX RWD (NA1\/NA2)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184968446012,"sku":"ST-NSX-XR1","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1990-2005-acura-nsx-na1-na2-st-nsx-xr1-1194427480.jpg?v=1768245613"},{"product_id":"stance-xr1-coilovers-2002-2006-acura-rsx","title":"Stance XR1 Coilovers for 2002-2006 Acura RSX (DC5)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2002-2006 Acura RSX (DC5) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your DC5 Acura RSX — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2002-2006 Acura RSX.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2002-2006 Acura RSX for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your DC5 Acura RSX on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the DC5 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the DC5 Acura RSX chassis so the coilovers bolt onto your 2002-2006 Acura RSX ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your DC5 Acura RSX.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-DC5-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2002-2006 Acura RSX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eDC5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e14 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eInverted Monotube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2002 Acura RSX FWD (DC5)\u003c\/li\u003e\n\u003cli\u003e2003 Acura RSX FWD (DC5)\u003c\/li\u003e\n\u003cli\u003e2004 Acura RSX FWD (DC5)\u003c\/li\u003e\n\u003cli\u003e2005 Acura RSX FWD (DC5)\u003c\/li\u003e\n\u003cli\u003e2006 Acura RSX FWD (DC5)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184968544316,"sku":"ST-DC5-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2002-2006-acura-rsx-dc5-st-dc5-xr1-1194432311.jpg?v=1768421532"},{"product_id":"stance-xr1-coilovers-2004-2008-acura-tsx","title":"Stance XR1 Coilovers for 2004-2008 Acura TSX (CL9)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2004-2008 Acura TSX (CL9) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your CL9 Acura TSX — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2004-2008 Acura TSX.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2004-2008 Acura TSX for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your CL9 Acura TSX on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the CL9 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the CL9 Acura TSX chassis so the coilovers bolt onto your 2004-2008 Acura TSX ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your CL9 Acura TSX.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-CL9-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2004-2008 Acura TSX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eCL9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e7 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2004 Acura TSX FWD (CL9)\u003c\/li\u003e\n\u003cli\u003e2005 Acura TSX FWD (CL9)\u003c\/li\u003e\n\u003cli\u003e2006 Acura TSX FWD (CL9)\u003c\/li\u003e\n\u003cli\u003e2007 Acura TSX FWD (CL9)\u003c\/li\u003e\n\u003cli\u003e2008 Acura TSX FWD (CL9)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184968577084,"sku":"ST-CL9-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2004-2008-acura-tsx-cl9-st-cl9-xr1-1194427219.jpg?v=1768242458"},{"product_id":"stance-xr1-coilovers-1984-1991-bmw-m3-e30","title":"Stance XR1 Coilovers for 1984-1991 BMW M3 (E30)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1984-1991 BMW M3 (E30) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your E30 BMW M3 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1984-1991 BMW M3.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1984-1991 BMW M3 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your E30 BMW M3 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the E30 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the E30 BMW M3 chassis so the coilovers bolt onto your 1984-1991 BMW M3 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your E30 BMW M3.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-E30-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1984-1991 BMW M3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eE30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003eOEM-type spring (factory location)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eInverted Monotube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eSeparate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eRequires welding to OEM spindles\u003c\/li\u003e\n\u003cli\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1984 BMW M3 RWD (E30)\u003c\/li\u003e\n\u003cli\u003e1985 BMW M3 RWD (E30)\u003c\/li\u003e\n\u003cli\u003e1986 BMW M3 RWD (E30)\u003c\/li\u003e\n\u003cli\u003e1987 BMW M3 RWD (E30)\u003c\/li\u003e\n\u003cli\u003e1988 BMW M3 RWD (E30)\u003c\/li\u003e\n\u003cli\u003e1989 BMW M3 RWD (E30)\u003c\/li\u003e\n\u003cli\u003e1990 BMW M3 RWD (E30)\u003c\/li\u003e\n\u003cli\u003e1991 BMW M3 RWD (E30)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eImportant Fitment Note:\u003c\/em\u003e This kit requires welding to the OEM spindles for proper installation. Professional installation is strongly recommended. Contact us before ordering if you have questions about the welding requirements.\u003c\/p\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184968609852,"sku":"ST-E30-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1984-1991-bmw-m3-e30-st-e30-xr1-1194427899.jpg?v=1768254220"},{"product_id":"stance-xr1-coilovers-2000-2005-bmw-m3-e46","title":"Stance XR1 Coilovers for 2001-2006 BMW M3 (E46)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2001-2006 BMW M3 (E46) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your E46 BMW M3 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2001-2006 BMW M3.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2001-2006 BMW M3 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your E46 BMW M3 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the E46 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the E46 BMW M3 chassis so the coilovers bolt onto your 2001-2006 BMW M3 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your E46 BMW M3.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-E46-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2001-2006 BMW M3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eE46\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e9 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eInverted Monotube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2001 BMW M3 RWD (E46)\u003c\/li\u003e\n\u003cli\u003e2002 BMW M3 RWD (E46)\u003c\/li\u003e\n\u003cli\u003e2003 BMW M3 RWD (E46)\u003c\/li\u003e\n\u003cli\u003e2004 BMW M3 RWD (E46)\u003c\/li\u003e\n\u003cli\u003e2005 BMW M3 RWD (E46)\u003c\/li\u003e\n\u003cli\u003e2006 BMW M3 RWD (E46)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184968740924,"sku":"ST-E46-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2001-2006-bmw-m3-e46-st-e46-xr1-1194427550.jpg?v=1769694550"},{"product_id":"stance-xr1-coilovers-1992-1999-bmw-m3-e36","title":"Stance XR1 Coilovers for 1992-1999 BMW M3 (E36)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1992-1999 BMW M3 (E36) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your E36 BMW M3 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1992-1999 BMW M3.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1992-1999 BMW M3 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your E36 BMW M3 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the E36 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the E36 BMW M3 chassis so the coilovers bolt onto your 1992-1999 BMW M3 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your E36 BMW M3.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-E36-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1992-1999 BMW M3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eE36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e9 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eInverted Monotube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1992 BMW M3 RWD (E36)\u003c\/li\u003e\n\u003cli\u003e1993 BMW M3 RWD (E36)\u003c\/li\u003e\n\u003cli\u003e1994 BMW M3 RWD (E36)\u003c\/li\u003e\n\u003cli\u003e1995 BMW M3 RWD (E36)\u003c\/li\u003e\n\u003cli\u003e1996 BMW M3 RWD (E36)\u003c\/li\u003e\n\u003cli\u003e1997 BMW M3 RWD (E36)\u003c\/li\u003e\n\u003cli\u003e1998 BMW M3 RWD (E36)\u003c\/li\u003e\n\u003cli\u003e1999 BMW M3 RWD (E36)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184968773692,"sku":"ST-E36-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1992-1999-bmw-m3-e36-st-e36-xr1-1194427459.jpg?v=1768245399"},{"product_id":"stance-xr1-coilovers-1998-2003-bmw-m5-e39","title":"Stance XR1 Coilovers for 1998-2003 BMW M5 (E39)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1998-2003 BMW M5 (E39) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your E39 BMW M5 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1998-2003 BMW M5.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1998-2003 BMW M5 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your E39 BMW M5 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the E39 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the E39 BMW M5 chassis so the coilovers bolt onto your 1998-2003 BMW M5 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your E39 BMW M5.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-E39-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1998-2003 BMW M5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eE39\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eInverted Monotube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1998 BMW M5 RWD (E39)\u003c\/li\u003e\n\u003cli\u003e1999 BMW M5 RWD (E39)\u003c\/li\u003e\n\u003cli\u003e2000 BMW M5 RWD (E39)\u003c\/li\u003e\n\u003cli\u003e2001 BMW M5 RWD (E39)\u003c\/li\u003e\n\u003cli\u003e2002 BMW M5 RWD (E39)\u003c\/li\u003e\n\u003cli\u003e2003 BMW M5 RWD (E39)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184968806460,"sku":"ST-E39-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1998-2003-bmw-m5-e39-st-e39-xr1-1194432232.jpg?v=1768419758"},{"product_id":"stance-xr1-coilovers-2005-2006-chevrolet-cobalt","title":"Stance XR1 Coilovers for 2005-2006 Chevrolet Cobalt","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2005-2006 Chevrolet Cobalt are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your Chevrolet Cobalt — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2005-2006 Chevrolet Cobalt.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2005-2006 Chevrolet Cobalt for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your Chevrolet Cobalt on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the Chevrolet Cobalt chassis so the coilovers bolt onto your 2005-2006 Chevrolet Cobalt ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your Chevrolet Cobalt.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-E60-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2005-2006 Chevrolet Cobalt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e— kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e— kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2005 Chevrolet Cobalt RWD\u003c\/li\u003e\n\u003cli\u003e2006 Chevrolet Cobalt RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184968937532,"sku":"ST-E60-XR1","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2005-2006-chevrolet-cobalt-st-e60-xr1-1194427201.jpg?v=1769693831"},{"product_id":"stance-xr1-coilovers-1997-2013-chevrolet-corvette-c5-c6","title":"Stance XR1 Coilovers for 1997-2013 Chevrolet Corvette (C5\/C6)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1997-2013 Chevrolet Corvette (C5\/C6) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your C5\/C6 Chevrolet Corvette — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1997-2013 Chevrolet Corvette.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1997-2013 Chevrolet Corvette for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your C5\/C6 Chevrolet Corvette on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the C5\/C6 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the C5\/C6 Chevrolet Corvette chassis so the coilovers bolt onto your 1997-2013 Chevrolet Corvette ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your C5\/C6 Chevrolet Corvette.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-C5C6-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1997-2013 Chevrolet Corvette\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eC5\/C6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e7.5 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1997 Chevrolet Corvette RWD (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e1998 Chevrolet Corvette RWD (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e1999 Chevrolet Corvette RWD (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e2000 Chevrolet Corvette RWD (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e2001 Chevrolet Corvette RWD (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e2002 Chevrolet Corvette RWD (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e2003 Chevrolet Corvette RWD (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e2004 Chevrolet Corvette RWD (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e2005 Chevrolet Corvette RWD (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e2006 Chevrolet Corvette RWD (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e2007 Chevrolet Corvette RWD (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e2008 Chevrolet Corvette RWD (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e2009 Chevrolet Corvette RWD (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e2010 Chevrolet Corvette RWD (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e2011 Chevrolet Corvette RWD (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e2012 Chevrolet Corvette RWD (C5\/C6)\u003c\/li\u003e\n\u003cli\u003e2013 Chevrolet Corvette RWD (C5\/C6)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184968970300,"sku":"ST-C5C6-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1997-2013-chevrolet-corvette-c5-c6-st-c5-c6-xr1-1194427237.jpg?v=1768078932"},{"product_id":"stance-xr1-coilovers-2003-2007-honda-accord","title":"Stance XR1 Coilovers for 2003-2007 Honda Accord (CM)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2003-2007 Honda Accord (CM) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your CM Honda Accord — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2003-2007 Honda Accord.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2003-2007 Honda Accord for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your CM Honda Accord on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the CM chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the CM Honda Accord chassis so the coilovers bolt onto your 2003-2007 Honda Accord ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your CM Honda Accord.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-CM-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2003-2007 Honda Accord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eCM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e7 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003 Honda Accord FWD (CM)\u003c\/li\u003e\n\u003cli\u003e2004 Honda Accord FWD (CM)\u003c\/li\u003e\n\u003cli\u003e2005 Honda Accord FWD (CM)\u003c\/li\u003e\n\u003cli\u003e2006 Honda Accord FWD (CM)\u003c\/li\u003e\n\u003cli\u003e2007 Honda Accord FWD (CM)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184969166908,"sku":"ST-CM-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2003-2007-honda-accord-cm-st-cm-xr1-1194427390.jpg?v=1768243571"},{"product_id":"stance-xr1-coilovers-1992-1995-honda-civic-eg","title":"Stance XR1 Coilovers for 1992-1995 Honda Civic (EG)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1992-1995 Honda Civic (EG) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your EG Honda Civic — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1992-1995 Honda Civic.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1992-1995 Honda Civic for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your EG Honda Civic on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the EG chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the EG Honda Civic chassis so the coilovers bolt onto your 1992-1995 Honda Civic ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your EG Honda Civic.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-EG-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1992-1995 Honda Civic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eEG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e16 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1992 Honda Civic FWD (EG)\u003c\/li\u003e\n\u003cli\u003e1993 Honda Civic FWD (EG)\u003c\/li\u003e\n\u003cli\u003e1994 Honda Civic FWD (EG)\u003c\/li\u003e\n\u003cli\u003e1995 Honda Civic FWD (EG)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184969592892,"sku":"ST-EG-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1992-1995-honda-civic-eg-st-eg-xr1-1194398961.jpg?v=1767531549"},{"product_id":"stance-xr1-coilovers-1996-2000-honda-civic-ek","title":"Stance XR1 Coilovers for 1996-2000 Honda Civic (EK)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1996-2000 Honda Civic (EK) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your EK Honda Civic — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1996-2000 Honda Civic.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1996-2000 Honda Civic for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your EK Honda Civic on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the EK chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the EK Honda Civic chassis so the coilovers bolt onto your 1996-2000 Honda Civic ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your EK Honda Civic.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-EK-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1996-2000 Honda Civic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eEK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e16 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1996 Honda Civic FWD (EK)\u003c\/li\u003e\n\u003cli\u003e1997 Honda Civic FWD (EK)\u003c\/li\u003e\n\u003cli\u003e1998 Honda Civic FWD (EK)\u003c\/li\u003e\n\u003cli\u003e1999 Honda Civic FWD (EK)\u003c\/li\u003e\n\u003cli\u003e2000 Honda Civic FWD (EK)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184969658428,"sku":"ST-EK-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1996-2000-honda-civic-ek-st-ek-xr1-1194427268.jpg?v=1767932138"},{"product_id":"stance-xr1-coilovers-2011-2016-honda-cr-z","title":"Stance XR1 Coilovers for 2011-2016 Honda CR-Z","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2011-2016 Honda CR-Z are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your Honda CR-Z — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2011-2016 Honda CR-Z.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2011-2016 Honda CR-Z for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your Honda CR-Z on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the Honda CR-Z chassis so the coilovers bolt onto your 2011-2016 Honda CR-Z ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your Honda CR-Z.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-ZF1-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2011-2016 Honda CR-Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e— kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e— kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2011 Honda CR-Z RWD\u003c\/li\u003e\n\u003cli\u003e2012 Honda CR-Z RWD\u003c\/li\u003e\n\u003cli\u003e2013 Honda CR-Z RWD\u003c\/li\u003e\n\u003cli\u003e2014 Honda CR-Z RWD\u003c\/li\u003e\n\u003cli\u003e2015 Honda CR-Z RWD\u003c\/li\u003e\n\u003cli\u003e2016 Honda CR-Z RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184969822268,"sku":"ST-ZF1-XR1","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2011-2016-honda-cr-z-st-zf1-xr1-1194427505.jpg?v=1769694309"},{"product_id":"stance-xr1-coilovers-2003-2007-infiniti-g35","title":"Stance XR1 Coilovers (True Rear) for 2003-2007 Infiniti G35 RWD (V35)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2003-2007 Infiniti G35 (V35) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your V35 Infiniti G35 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2003-2007 Infiniti G35.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2003-2007 Infiniti G35 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your V35 Infiniti G35 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the V35 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the V35 Infiniti G35 chassis so the coilovers bolt onto your 2003-2007 Infiniti G35 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your V35 Infiniti G35.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-Z33-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2003-2007 Infiniti G35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eV35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003 Infiniti G35 RWD (V35)\u003c\/li\u003e\n\u003cli\u003e2004 Infiniti G35 RWD (V35)\u003c\/li\u003e\n\u003cli\u003e2005 Infiniti G35 RWD (V35)\u003c\/li\u003e\n\u003cli\u003e2006 Infiniti G35 RWD (V35)\u003c\/li\u003e\n\u003cli\u003e2007 Infiniti G35 RWD (V35)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184970084412,"sku":"ST-Z33-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-true-rear-for-2003-2007-infiniti-g35-rwd-v35-st-z33-xr1-1194427385.jpg?v=1768243392"},{"product_id":"stance-xr1-coilovers-2008-2013-infiniti-g37","title":"Stance XR1 Coilovers (True Rear) for 2008-2013 Infiniti G37 (V36)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2008-2013 Infiniti G37 (V36) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your V36 Infiniti G37 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2008-2013 Infiniti G37.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2008-2013 Infiniti G37 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your V36 Infiniti G37 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the V36 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the V36 Infiniti G37 chassis so the coilovers bolt onto your 2008-2013 Infiniti G37 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your V36 Infiniti G37.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-Z34-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2008-2013 Infiniti G37\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eV36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008 Infiniti G37 RWD (V36)\u003c\/li\u003e\n\u003cli\u003e2009 Infiniti G37 RWD (V36)\u003c\/li\u003e\n\u003cli\u003e2010 Infiniti G37 RWD (V36)\u003c\/li\u003e\n\u003cli\u003e2011 Infiniti G37 RWD (V36)\u003c\/li\u003e\n\u003cli\u003e2012 Infiniti G37 RWD (V36)\u003c\/li\u003e\n\u003cli\u003e2013 Infiniti G37 RWD (V36)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184970117180,"sku":"ST-Z34-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-true-rear-for-2008-2013-infiniti-g37-v36-st-z34-xr1-1194427328.jpg?v=1768242611"},{"product_id":"stance-xr1-coilovers-2003-2006-infiniti-g35-awd","title":"Stance XR1 Coilovers for 2003-2006 Infiniti G35 AWD (V35)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2003-2006 Infiniti G35 (V35) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your V35 Infiniti G35 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2003-2006 Infiniti G35.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2003-2006 Infiniti G35 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your V35 Infiniti G35 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the V35 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the V35 Infiniti G35 chassis so the coilovers bolt onto your 2003-2006 Infiniti G35 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your V35 Infiniti G35.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-V35-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2003-2006 Infiniti G35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eV35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003 Infiniti G35 AWD (V35)\u003c\/li\u003e\n\u003cli\u003e2004 Infiniti G35 AWD (V35)\u003c\/li\u003e\n\u003cli\u003e2005 Infiniti G35 AWD (V35)\u003c\/li\u003e\n\u003cli\u003e2006 Infiniti G35 AWD (V35)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184970248252,"sku":"ST-V35-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2003-2006-infiniti-g35-awd-v35-st-v35-xr1-1194427305.jpg?v=1767965138"},{"product_id":"stance-xr1-coilovers-2000-2005-lexus-is300","title":"Stance XR1 Coilovers for 2000-2005 Lexus IS300 (SXE10)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2000-2005 Lexus IS300 (SXE10) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your SXE10 Lexus IS300 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2000-2005 Lexus IS300.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2000-2005 Lexus IS300 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your SXE10 Lexus IS300 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the SXE10 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the SXE10 Lexus IS300 chassis so the coilovers bolt onto your 2000-2005 Lexus IS300 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your SXE10 Lexus IS300.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-SXE10-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2000-2005 Lexus IS300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eSXE10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e18 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2000 Lexus IS300 RWD (SXE10)\u003c\/li\u003e\n\u003cli\u003e2001 Lexus IS300 RWD (SXE10)\u003c\/li\u003e\n\u003cli\u003e2002 Lexus IS300 RWD (SXE10)\u003c\/li\u003e\n\u003cli\u003e2003 Lexus IS300 RWD (SXE10)\u003c\/li\u003e\n\u003cli\u003e2004 Lexus IS300 RWD (SXE10)\u003c\/li\u003e\n\u003cli\u003e2005 Lexus IS300 RWD (SXE10)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184970838076,"sku":"ST-SXE10-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2000-2005-lexus-is300-sxe10-st-sxe10-xr1-1194427545.jpg?v=1768246451"},{"product_id":"stance-xr1-coilovers-1992-2000-lexus-sc300-sc400","title":"Stance XR1 Coilovers for 1992-2000 Lexus SC300","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1992-2000 Lexus SC300 are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your Lexus SC300 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1992-2000 Lexus SC300.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1992-2000 Lexus SC300 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your Lexus SC300 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the Lexus SC300 chassis so the coilovers bolt onto your 1992-2000 Lexus SC300 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your Lexus SC300.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-JZZ30-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1992-2000 Lexus SC300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e18 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1992 Lexus SC300 RWD\u003c\/li\u003e\n\u003cli\u003e1993 Lexus SC300 RWD\u003c\/li\u003e\n\u003cli\u003e1994 Lexus SC300 RWD\u003c\/li\u003e\n\u003cli\u003e1995 Lexus SC300 RWD\u003c\/li\u003e\n\u003cli\u003e1996 Lexus SC300 RWD\u003c\/li\u003e\n\u003cli\u003e1997 Lexus SC300 RWD\u003c\/li\u003e\n\u003cli\u003e1998 Lexus SC300 RWD\u003c\/li\u003e\n\u003cli\u003e1999 Lexus SC300 RWD\u003c\/li\u003e\n\u003cli\u003e2000 Lexus SC300 RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184970870844,"sku":"ST-JZZ30-XR1","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1992-2000-lexus-sc300-st-jzz30-xr1-1194427454.jpg?v=1768244978"},{"product_id":"stance-xr1-coilovers-1991-1996-lexus-gs300","title":"Stance XR1 Coilovers for 1991-1996 Lexus GS300 (JZS147)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1991-1996 Lexus GS300 (JZS147) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your JZS147 Lexus GS300 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1991-1996 Lexus GS300.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1991-1996 Lexus GS300 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your JZS147 Lexus GS300 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the JZS147 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the JZS147 Lexus GS300 chassis so the coilovers bolt onto your 1991-1996 Lexus GS300 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your JZS147 Lexus GS300.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-JZS147-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1991-1996 Lexus GS300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eJZS147\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e14 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1991 Lexus GS300 RWD (JZS147)\u003c\/li\u003e\n\u003cli\u003e1992 Lexus GS300 RWD (JZS147)\u003c\/li\u003e\n\u003cli\u003e1993 Lexus GS300 RWD (JZS147)\u003c\/li\u003e\n\u003cli\u003e1994 Lexus GS300 RWD (JZS147)\u003c\/li\u003e\n\u003cli\u003e1995 Lexus GS300 RWD (JZS147)\u003c\/li\u003e\n\u003cli\u003e1996 Lexus GS300 RWD (JZS147)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184971165756,"sku":"ST-JZS147-XR1","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1991-1996-lexus-gs300-jzs147-st-jzs147-xr1-1194432306.jpg?v=1769749270"},{"product_id":"stance-xr1-coilovers-1997-2005-lexus-gs300-gs400","title":"Stance XR1 Coilovers for 1997-2005 Lexus GS300","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1997-2005 Lexus GS300 are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your Lexus GS300 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1997-2005 Lexus GS300.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1997-2005 Lexus GS300 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your Lexus GS300 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the Lexus GS300 chassis so the coilovers bolt onto your 1997-2005 Lexus GS300 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your Lexus GS300.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-JZS161-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1997-2005 Lexus GS300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e16 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1997 Lexus GS300 RWD\u003c\/li\u003e\n\u003cli\u003e1998 Lexus GS300 RWD\u003c\/li\u003e\n\u003cli\u003e1999 Lexus GS300 RWD\u003c\/li\u003e\n\u003cli\u003e2000 Lexus GS300 RWD\u003c\/li\u003e\n\u003cli\u003e2001 Lexus GS300 RWD\u003c\/li\u003e\n\u003cli\u003e2002 Lexus GS300 RWD\u003c\/li\u003e\n\u003cli\u003e2003 Lexus GS300 RWD\u003c\/li\u003e\n\u003cli\u003e2004 Lexus GS300 RWD\u003c\/li\u003e\n\u003cli\u003e2005 Lexus GS300 RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184971198524,"sku":"ST-JZS161-XR1","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1997-2005-lexus-gs300-gs400-st-jzs161-xr1-1194427241.jpg?v=1768082922"},{"product_id":"stance-xr1-coilovers-1994-2000-lexus-ls400","title":"Stance XR1 Coilovers for 1994-2000 Lexus LS400","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1994-2000 Lexus LS400 are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your Lexus LS400 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1994-2000 Lexus LS400.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1994-2000 Lexus LS400 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your Lexus LS400 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the Lexus LS400 chassis so the coilovers bolt onto your 1994-2000 Lexus LS400 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your Lexus LS400.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-UCF20-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1994-2000 Lexus LS400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e— kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e— kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1994 Lexus LS400 RWD\u003c\/li\u003e\n\u003cli\u003e1995 Lexus LS400 RWD\u003c\/li\u003e\n\u003cli\u003e1996 Lexus LS400 RWD\u003c\/li\u003e\n\u003cli\u003e1997 Lexus LS400 RWD\u003c\/li\u003e\n\u003cli\u003e1998 Lexus LS400 RWD\u003c\/li\u003e\n\u003cli\u003e1999 Lexus LS400 RWD\u003c\/li\u003e\n\u003cli\u003e2000 Lexus LS400 RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184971395132,"sku":"ST-UCF20-XR1","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1994-2000-lexus-ls400-st-ucf20-xr1-1194397101.jpg?v=1767486850"},{"product_id":"stance-xr1-coilovers-2001-2006-lexus-ls430","title":"Stance XR1 Coilovers for 2001-2006 Lexus LS430","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2001-2006 Lexus LS430 are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your Lexus LS430 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2001-2006 Lexus LS430.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2001-2006 Lexus LS430 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your Lexus LS430 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the Lexus LS430 chassis so the coilovers bolt onto your 2001-2006 Lexus LS430 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your Lexus LS430.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-UCF30-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2001-2006 Lexus LS430\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e— kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e— kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2001 Lexus LS430 RWD\u003c\/li\u003e\n\u003cli\u003e2002 Lexus LS430 RWD\u003c\/li\u003e\n\u003cli\u003e2003 Lexus LS430 RWD\u003c\/li\u003e\n\u003cli\u003e2004 Lexus LS430 RWD\u003c\/li\u003e\n\u003cli\u003e2005 Lexus LS430 RWD\u003c\/li\u003e\n\u003cli\u003e2006 Lexus LS430 RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184971493436,"sku":"ST-UCF30-XR1","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2001-2006-lexus-ls430-st-ucf30-xr1-1194427360.jpg?v=1768242999"},{"product_id":"stance-xr1-coilovers-2000-2006-lincoln-ls","title":"Stance XR1 Coilovers for 2000-2006 Lincoln LS","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2000-2006 Lincoln LS (D98) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your D98 Lincoln LS — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2000-2006 Lincoln LS.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2000-2006 Lincoln LS for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your D98 Lincoln LS on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the D98 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the D98 Lincoln LS chassis so the coilovers bolt onto your 2000-2006 Lincoln LS ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your D98 Lincoln LS.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-D98-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2000-2006 Lincoln LS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eD98\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2000 Lincoln LS RWD (D98)\u003c\/li\u003e\n\u003cli\u003e2001 Lincoln LS RWD (D98)\u003c\/li\u003e\n\u003cli\u003e2002 Lincoln LS RWD (D98)\u003c\/li\u003e\n\u003cli\u003e2003 Lincoln LS RWD (D98)\u003c\/li\u003e\n\u003cli\u003e2004 Lincoln LS RWD (D98)\u003c\/li\u003e\n\u003cli\u003e2005 Lincoln LS RWD (D98)\u003c\/li\u003e\n\u003cli\u003e2006 Lincoln LS RWD (D98)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184971526204,"sku":"ST-D98-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-2000-2006-lincoln-ls-st-d98-xr1-30559569444924.jpg?v=1663663323"},{"product_id":"stance-xr1-coilovers-1978-1985-mazda-rx-7","title":"Stance XR1 Coilovers for 1978-1985 Mazda RX-7","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1978-1985 Mazda RX-7 (SA22) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your SA22 Mazda RX-7 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1978-1985 Mazda RX-7.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1978-1985 Mazda RX-7 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your SA22 Mazda RX-7 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the SA22 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the SA22 Mazda RX-7 chassis so the coilovers bolt onto your 1978-1985 Mazda RX-7 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your SA22 Mazda RX-7.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-SA22-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1978-1985 Mazda RX-7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eSA22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003eOEM-type spring (factory location)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eInverted Monotube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eSeparate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eRequires welding to OEM spindles\u003c\/li\u003e\n\u003cli\u003eSwift Springs upgrade available for an additional $150.00 (pair). Contact us to add.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1978 Mazda RX-7 RWD (SA22)\u003c\/li\u003e\n\u003cli\u003e1979 Mazda RX-7 RWD (SA22)\u003c\/li\u003e\n\u003cli\u003e1980 Mazda RX-7 RWD (SA22)\u003c\/li\u003e\n\u003cli\u003e1981 Mazda RX-7 RWD (SA22)\u003c\/li\u003e\n\u003cli\u003e1982 Mazda RX-7 RWD (SA22)\u003c\/li\u003e\n\u003cli\u003e1983 Mazda RX-7 RWD (SA22)\u003c\/li\u003e\n\u003cli\u003e1984 Mazda RX-7 RWD (SA22)\u003c\/li\u003e\n\u003cli\u003e1985 Mazda RX-7 RWD (SA22)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eImportant Fitment Note:\u003c\/em\u003e This kit requires welding to the OEM spindles for proper installation. Professional installation is strongly recommended. Contact us before ordering if you have questions about the welding requirements.\u003c\/p\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184971853884,"sku":"ST-SA22-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1978-1985-mazda-rx-7-st-sa22-xr1-1194427835.jpg?v=1769698570"},{"product_id":"stance-xr1-coilovers-1986-1991-mazda-rx-7","title":"Stance XR1 Coilovers for 1986-1991 Mazda RX-7 (FC)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1986-1991 Mazda RX-7 (FC) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your FC Mazda RX-7 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1986-1991 Mazda RX-7.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1986-1991 Mazda RX-7 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your FC Mazda RX-7 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the FC chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the FC Mazda RX-7 chassis so the coilovers bolt onto your 1986-1991 Mazda RX-7 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your FC Mazda RX-7.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-FC3S-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1986-1991 Mazda RX-7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eFC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e9 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e7 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eInverted Monotube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1986 Mazda RX-7 RWD (FC)\u003c\/li\u003e\n\u003cli\u003e1987 Mazda RX-7 RWD (FC)\u003c\/li\u003e\n\u003cli\u003e1988 Mazda RX-7 RWD (FC)\u003c\/li\u003e\n\u003cli\u003e1989 Mazda RX-7 RWD (FC)\u003c\/li\u003e\n\u003cli\u003e1990 Mazda RX-7 RWD (FC)\u003c\/li\u003e\n\u003cli\u003e1991 Mazda RX-7 RWD (FC)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184971886652,"sku":"ST-FC3S-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1986-1991-mazda-rx-7-fc-st-fc3s-xr1-1194427894.jpg?v=1768254100"},{"product_id":"stance-xr1-coilovers-1993-1996-mazda-rx-7","title":"Stance XR1 Coilovers for 1993-1996 Mazda RX-7 (FD)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1993-1996 Mazda RX-7 (FD) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your FD Mazda RX-7 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1993-1996 Mazda RX-7.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1993-1996 Mazda RX-7 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your FD Mazda RX-7 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the FD chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the FD Mazda RX-7 chassis so the coilovers bolt onto your 1993-1996 Mazda RX-7 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your FD Mazda RX-7.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-FD3S-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1993-1996 Mazda RX-7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eFD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1993 Mazda RX-7 RWD (FD)\u003c\/li\u003e\n\u003cli\u003e1994 Mazda RX-7 RWD (FD)\u003c\/li\u003e\n\u003cli\u003e1995 Mazda RX-7 RWD (FD)\u003c\/li\u003e\n\u003cli\u003e1996 Mazda RX-7 RWD (FD)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184971919420,"sku":"ST-FD3S-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1993-1996-mazda-rx-7-fd-st-fd3s-xr1-1194427449.jpg?v=1768244771"},{"product_id":"stance-xr1-coilovers-1990-1998-mazda-miata","title":"Stance XR1 Coilovers for 1990-1998 Mazda Miata (NA8C)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1990-1998 Mazda Miata (NA8C) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your NA8C Mazda Miata — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1990-1998 Mazda Miata.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1990-1998 Mazda Miata for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your NA8C Mazda Miata on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the NA8C chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the NA8C Mazda Miata chassis so the coilovers bolt onto your 1990-1998 Mazda Miata ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your NA8C Mazda Miata.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-NA8C-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1990-1998 Mazda Miata\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eNA8C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1990 Mazda Miata RWD (NA8C)\u003c\/li\u003e\n\u003cli\u003e1991 Mazda Miata RWD (NA8C)\u003c\/li\u003e\n\u003cli\u003e1992 Mazda Miata RWD (NA8C)\u003c\/li\u003e\n\u003cli\u003e1993 Mazda Miata RWD (NA8C)\u003c\/li\u003e\n\u003cli\u003e1994 Mazda Miata RWD (NA8C)\u003c\/li\u003e\n\u003cli\u003e1995 Mazda Miata RWD (NA8C)\u003c\/li\u003e\n\u003cli\u003e1996 Mazda Miata RWD (NA8C)\u003c\/li\u003e\n\u003cli\u003e1997 Mazda Miata RWD (NA8C)\u003c\/li\u003e\n\u003cli\u003e1998 Mazda Miata RWD (NA8C)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184972017724,"sku":"ST-NA8C-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1990-1998-mazda-miata-na8c-st-na8c-xr1-1194427857.jpg?v=1768253111"},{"product_id":"stance-xr1-coilovers-1999-2005-mazda-miata","title":"Stance XR1 Coilovers for 1999-2005 Mazda Miata (NB8C)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1999-2005 Mazda Miata (NB8C) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your NB8C Mazda Miata — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1999-2005 Mazda Miata.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1999-2005 Mazda Miata for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your NB8C Mazda Miata on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the NB8C chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the NB8C Mazda Miata chassis so the coilovers bolt onto your 1999-2005 Mazda Miata ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your NB8C Mazda Miata.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-NB8C-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1999-2005 Mazda Miata\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eNB8C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1999 Mazda Miata RWD (NB8C)\u003c\/li\u003e\n\u003cli\u003e2000 Mazda Miata RWD (NB8C)\u003c\/li\u003e\n\u003cli\u003e2001 Mazda Miata RWD (NB8C)\u003c\/li\u003e\n\u003cli\u003e2002 Mazda Miata RWD (NB8C)\u003c\/li\u003e\n\u003cli\u003e2003 Mazda Miata RWD (NB8C)\u003c\/li\u003e\n\u003cli\u003e2004 Mazda Miata RWD (NB8C)\u003c\/li\u003e\n\u003cli\u003e2005 Mazda Miata RWD (NB8C)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184972378172,"sku":"ST-NB8C-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1999-2005-mazda-miata-nb8c-st-nb8c-xr1-1194427551.jpg?v=1769694637"},{"product_id":"stance-xr1-coilovers-2006-2014-mazda-miata","title":"Stance XR1 Coilovers for 2006-2014 Mazda Miata (NCEC)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2006-2015 Mazda Miata (NCEC) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your NCEC Mazda Miata — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2006-2015 Mazda Miata.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2006-2015 Mazda Miata for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your NCEC Mazda Miata on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the NCEC chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the NCEC Mazda Miata chassis so the coilovers bolt onto your 2006-2015 Mazda Miata ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your NCEC Mazda Miata.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-NCEC-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2006-2015 Mazda Miata\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eNCEC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e7 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e5 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2006 Mazda Miata RWD (NCEC)\u003c\/li\u003e\n\u003cli\u003e2007 Mazda Miata RWD (NCEC)\u003c\/li\u003e\n\u003cli\u003e2008 Mazda Miata RWD (NCEC)\u003c\/li\u003e\n\u003cli\u003e2009 Mazda Miata RWD (NCEC)\u003c\/li\u003e\n\u003cli\u003e2010 Mazda Miata RWD (NCEC)\u003c\/li\u003e\n\u003cli\u003e2011 Mazda Miata RWD (NCEC)\u003c\/li\u003e\n\u003cli\u003e2012 Mazda Miata RWD (NCEC)\u003c\/li\u003e\n\u003cli\u003e2013 Mazda Miata RWD (NCEC)\u003c\/li\u003e\n\u003cli\u003e2014 Mazda Miata RWD (NCEC)\u003c\/li\u003e\n\u003cli\u003e2015 Mazda Miata RWD (NCEC)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184972607548,"sku":"ST-NCEC-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2006-2014-mazda-miata-ncec-st-ncec-xr1-1194427345.jpg?v=1768242791"},{"product_id":"stance-xr1-coilovers-2015-mazda-miata","title":"Stance XR1 Coilovers for 2015+ Mazda Miata (ND)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2015+ Mazda Miata (ND) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your ND Mazda Miata — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2015+ Mazda Miata.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2015+ Mazda Miata for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your ND Mazda Miata on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the ND chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the ND Mazda Miata chassis so the coilovers bolt onto your 2015+ Mazda Miata ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your ND Mazda Miata.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-ND-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2015+ Mazda Miata\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eND\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e7 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e4 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2015 Mazda Miata RWD (ND)\u003c\/li\u003e\n\u003cli\u003e2016 Mazda Miata RWD (ND)\u003c\/li\u003e\n\u003cli\u003e2017 Mazda Miata RWD (ND)\u003c\/li\u003e\n\u003cli\u003e2018 Mazda Miata RWD (ND)\u003c\/li\u003e\n\u003cli\u003e2019 Mazda Miata RWD (ND)\u003c\/li\u003e\n\u003cli\u003e2020 Mazda Miata RWD (ND)\u003c\/li\u003e\n\u003cli\u003e2021 Mazda Miata RWD (ND)\u003c\/li\u003e\n\u003cli\u003e2022 Mazda Miata RWD (ND)\u003c\/li\u003e\n\u003cli\u003e2023 Mazda Miata RWD (ND)\u003c\/li\u003e\n\u003cli\u003e2024 Mazda Miata RWD (ND)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184972673084,"sku":"ST-ND-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2015-mazda-miata-nd-st-nd-xr1-1194427425.jpg?v=1768244138"},{"product_id":"stance-xr1-coilovers-2004-2012-mazda-rx-8","title":"Stance XR1 Coilovers for 2004-2012 Mazda RX-8 (SE3P)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2004-2012 Mazda RX-8 (SE3P) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your SE3P Mazda RX-8 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2004-2012 Mazda RX-8.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2004-2012 Mazda RX-8 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your SE3P Mazda RX-8 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the SE3P chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the SE3P Mazda RX-8 chassis so the coilovers bolt onto your 2004-2012 Mazda RX-8 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your SE3P Mazda RX-8.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-SE3P-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2004-2012 Mazda RX-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eSE3P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e9 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2004 Mazda RX-8 RWD (SE3P)\u003c\/li\u003e\n\u003cli\u003e2005 Mazda RX-8 RWD (SE3P)\u003c\/li\u003e\n\u003cli\u003e2006 Mazda RX-8 RWD (SE3P)\u003c\/li\u003e\n\u003cli\u003e2007 Mazda RX-8 RWD (SE3P)\u003c\/li\u003e\n\u003cli\u003e2008 Mazda RX-8 RWD (SE3P)\u003c\/li\u003e\n\u003cli\u003e2009 Mazda RX-8 RWD (SE3P)\u003c\/li\u003e\n\u003cli\u003e2010 Mazda RX-8 RWD (SE3P)\u003c\/li\u003e\n\u003cli\u003e2011 Mazda RX-8 RWD (SE3P)\u003c\/li\u003e\n\u003cli\u003e2012 Mazda RX-8 RWD (SE3P)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184972836924,"sku":"ST-SE3P-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2004-2012-mazda-rx-8-se3p-st-se3p-xr1-1194427206.jpg?v=1768242071"},{"product_id":"stance-xr1-coilovers-2004-2009-mazda-3","title":"Stance XR1 Coilovers for 2004-2009 Mazda 3","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2004-2009 Mazda 3 are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your Mazda 3 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2004-2009 Mazda 3.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2004-2009 Mazda 3 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your Mazda 3 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the Mazda 3 chassis so the coilovers bolt onto your 2004-2009 Mazda 3 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your Mazda 3.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-BK3P-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2004-2009 Mazda 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e5 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eSeparate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2004 Mazda 3 RWD\u003c\/li\u003e\n\u003cli\u003e2005 Mazda 3 RWD\u003c\/li\u003e\n\u003cli\u003e2006 Mazda 3 RWD\u003c\/li\u003e\n\u003cli\u003e2007 Mazda 3 RWD\u003c\/li\u003e\n\u003cli\u003e2008 Mazda 3 RWD\u003c\/li\u003e\n\u003cli\u003e2009 Mazda 3 RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184972869692,"sku":"ST-BK3P-XR1","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2004-2009-mazda-3-st-bk3p-xr1-1194359916.jpg?v=1764372128"},{"product_id":"stance-xr1-coilovers-1998-2000-mitsubishi-lancer-evolution","title":"Stance XR1 Coilovers for 1998-2000 Mitsubishi Lancer Evolution","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1998-2000 Mitsubishi Lancer Evolution are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your Mitsubishi Lancer Evolution — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1998-2000 Mitsubishi Lancer Evolution.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1998-2000 Mitsubishi Lancer Evolution for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your Mitsubishi Lancer Evolution on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the Mitsubishi Lancer Evolution chassis so the coilovers bolt onto your 1998-2000 Mitsubishi Lancer Evolution ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your Mitsubishi Lancer Evolution.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-CP9A-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1998-2000 Mitsubishi Lancer Evolution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e9 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eInverted Monotube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1998 Mitsubishi Lancer Evolution RWD\u003c\/li\u003e\n\u003cli\u003e1999 Mitsubishi Lancer Evolution RWD\u003c\/li\u003e\n\u003cli\u003e2000 Mitsubishi Lancer Evolution RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184973099068,"sku":"ST-CP9A-XR1","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1998-2000-mitsubishi-lancer-evolution-st-cp9a-xr1-1194357172.jpg?v=1769212510"},{"product_id":"stance-xr1-coilovers-2001-2007-mitsubishi-lancer-evolution","title":"Stance XR1 Coilovers for 2001-2006 Mitsubishi Lancer Evolution (CT9A)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2001-2006 Mitsubishi Lancer Evolution (CT9A) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your CT9A Mitsubishi Lancer Evolution — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2001-2006 Mitsubishi Lancer Evolution.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2001-2006 Mitsubishi Lancer Evolution for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your CT9A Mitsubishi Lancer Evolution on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the CT9A chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the CT9A Mitsubishi Lancer Evolution chassis so the coilovers bolt onto your 2001-2006 Mitsubishi Lancer Evolution ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your CT9A Mitsubishi Lancer Evolution.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-CT9A-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2001-2006 Mitsubishi Lancer Evolution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eCT9A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e9 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eInverted Monotube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2001 Mitsubishi Lancer Evolution AWD (CT9A)\u003c\/li\u003e\n\u003cli\u003e2002 Mitsubishi Lancer Evolution AWD (CT9A)\u003c\/li\u003e\n\u003cli\u003e2003 Mitsubishi Lancer Evolution AWD (CT9A)\u003c\/li\u003e\n\u003cli\u003e2004 Mitsubishi Lancer Evolution AWD (CT9A)\u003c\/li\u003e\n\u003cli\u003e2005 Mitsubishi Lancer Evolution AWD (CT9A)\u003c\/li\u003e\n\u003cli\u003e2006 Mitsubishi Lancer Evolution AWD (CT9A)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184973131836,"sku":"ST-CT9A-XR1","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2001-2006-mitsubishi-lancer-evolution-ct9a-st-ct9a-xr1-1194357181.jpg?v=1764417359"},{"product_id":"stance-xr1-coilovers-2008-2015-mitsubishi-lancer-evolution","title":"Stance XR1 Coilovers for 2008-2015 Mitsubishi Lancer Evolution","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2008-2015 Mitsubishi Lancer Evolution are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your Mitsubishi Lancer Evolution — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2008-2015 Mitsubishi Lancer Evolution.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2008-2015 Mitsubishi Lancer Evolution for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your Mitsubishi Lancer Evolution on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the Mitsubishi Lancer Evolution chassis so the coilovers bolt onto your 2008-2015 Mitsubishi Lancer Evolution ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your Mitsubishi Lancer Evolution.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-CZ4A-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2008-2015 Mitsubishi Lancer Evolution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eInverted Monotube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008 Mitsubishi Lancer Evolution RWD\u003c\/li\u003e\n\u003cli\u003e2009 Mitsubishi Lancer Evolution RWD\u003c\/li\u003e\n\u003cli\u003e2010 Mitsubishi Lancer Evolution RWD\u003c\/li\u003e\n\u003cli\u003e2011 Mitsubishi Lancer Evolution RWD\u003c\/li\u003e\n\u003cli\u003e2012 Mitsubishi Lancer Evolution RWD\u003c\/li\u003e\n\u003cli\u003e2013 Mitsubishi Lancer Evolution RWD\u003c\/li\u003e\n\u003cli\u003e2014 Mitsubishi Lancer Evolution RWD\u003c\/li\u003e\n\u003cli\u003e2015 Mitsubishi Lancer Evolution RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184973164604,"sku":"ST-CZ4A-XR1","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2008-2015-mitsubishi-lancer-evolution-st-cz4a-xr1-1194357186.jpg?v=1764417235"},{"product_id":"stance-xr1-coilovers-2008-2017-mitsubishi-lancer","title":"Stance XR1 Coilovers for 2008-2017 Mitsubishi Lancer","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2008-2017 Mitsubishi Lancer are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your Mitsubishi Lancer — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2008-2017 Mitsubishi Lancer.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2008-2017 Mitsubishi Lancer for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your Mitsubishi Lancer on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the Mitsubishi Lancer chassis so the coilovers bolt onto your 2008-2017 Mitsubishi Lancer ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your Mitsubishi Lancer.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-CY4A-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2008-2017 Mitsubishi Lancer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e— kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e— kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008 Mitsubishi Lancer RWD\u003c\/li\u003e\n\u003cli\u003e2009 Mitsubishi Lancer RWD\u003c\/li\u003e\n\u003cli\u003e2010 Mitsubishi Lancer RWD\u003c\/li\u003e\n\u003cli\u003e2011 Mitsubishi Lancer RWD\u003c\/li\u003e\n\u003cli\u003e2012 Mitsubishi Lancer RWD\u003c\/li\u003e\n\u003cli\u003e2013 Mitsubishi Lancer RWD\u003c\/li\u003e\n\u003cli\u003e2014 Mitsubishi Lancer RWD\u003c\/li\u003e\n\u003cli\u003e2015 Mitsubishi Lancer RWD\u003c\/li\u003e\n\u003cli\u003e2016 Mitsubishi Lancer RWD\u003c\/li\u003e\n\u003cli\u003e2017 Mitsubishi Lancer RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184973328444,"sku":"ST-CY4A-XR1","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2008-2017-mitsubishi-lancer-st-cy4a-xr1-1194427528.jpg?v=1769694338"},{"product_id":"stance-xr1-coilovers-1989-1994-nissan-240sx-s13","title":"Stance XR1 Coilovers for 1989-1994 Nissan 240SX (S13)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1989-1994 Nissan 240SX (S13) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your S13 Nissan 240SX — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1989-1994 Nissan 240SX.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1989-1994 Nissan 240SX for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your S13 Nissan 240SX on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the S13 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the S13 Nissan 240SX chassis so the coilovers bolt onto your 1989-1994 Nissan 240SX ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your S13 Nissan 240SX.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-S13-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1989-1994 Nissan 240SX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eS13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eInverted Monotube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $150.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1989 Nissan 240SX RWD (S13)\u003c\/li\u003e\n\u003cli\u003e1990 Nissan 240SX RWD (S13)\u003c\/li\u003e\n\u003cli\u003e1991 Nissan 240SX RWD (S13)\u003c\/li\u003e\n\u003cli\u003e1992 Nissan 240SX RWD (S13)\u003c\/li\u003e\n\u003cli\u003e1993 Nissan 240SX RWD (S13)\u003c\/li\u003e\n\u003cli\u003e1994 Nissan 240SX RWD (S13)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184973393980,"sku":"ST-S13-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1989-1994-nissan-240sx-s13-st-s13-xr1-1194427888.jpg?v=1768253920"},{"product_id":"stance-xr1-coilovers-1995-1998-nissan-240sx-s14","title":"Stance XR1 Coilovers for 1995-1998 Nissan 240SX (S14)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1995-1998 Nissan 240SX (S14) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your S14 Nissan 240SX — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1995-1998 Nissan 240SX.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1995-1998 Nissan 240SX for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your S14 Nissan 240SX on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the S14 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the S14 Nissan 240SX chassis so the coilovers bolt onto your 1995-1998 Nissan 240SX ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your S14 Nissan 240SX.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-S14-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1995-1998 Nissan 240SX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eS14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eInverted Monotube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1995 Nissan 240SX RWD (S14)\u003c\/li\u003e\n\u003cli\u003e1996 Nissan 240SX RWD (S14)\u003c\/li\u003e\n\u003cli\u003e1997 Nissan 240SX RWD (S14)\u003c\/li\u003e\n\u003cli\u003e1998 Nissan 240SX RWD (S14)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184973426748,"sku":"ST-S14-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1995-1998-nissan-240sx-s14-st-s14-xr1-1194427289.jpg?v=1769142157"},{"product_id":"stance-xr1-coilovers-1983-1989-nissan-300zx","title":"Stance XR1 Coilovers for 1983-1989 Nissan 300ZX (Z31)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1983-1989 Nissan 300ZX (Z31) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your Z31 Nissan 300ZX — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1983-1989 Nissan 300ZX.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1983-1989 Nissan 300ZX for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your Z31 Nissan 300ZX on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the Z31 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the Z31 Nissan 300ZX chassis so the coilovers bolt onto your 1983-1989 Nissan 300ZX ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your Z31 Nissan 300ZX.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-Z31-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1983-1989 Nissan 300ZX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eZ31\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e9 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e7 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eInverted Monotube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eRequires welding to OEM spindles\u003c\/li\u003e\n\u003cli\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1983 Nissan 300ZX RWD (Z31)\u003c\/li\u003e\n\u003cli\u003e1984 Nissan 300ZX RWD (Z31)\u003c\/li\u003e\n\u003cli\u003e1985 Nissan 300ZX RWD (Z31)\u003c\/li\u003e\n\u003cli\u003e1986 Nissan 300ZX RWD (Z31)\u003c\/li\u003e\n\u003cli\u003e1987 Nissan 300ZX RWD (Z31)\u003c\/li\u003e\n\u003cli\u003e1988 Nissan 300ZX RWD (Z31)\u003c\/li\u003e\n\u003cli\u003e1989 Nissan 300ZX RWD (Z31)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eImportant Fitment Note:\u003c\/em\u003e This kit requires welding to the OEM spindles for proper installation. Professional installation is strongly recommended. Contact us before ordering if you have questions about the welding requirements.\u003c\/p\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184973590588,"sku":"ST-Z31-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1983-1989-nissan-300zx-z31-st-z31-xr1-1194427805.jpg?v=1768251883"},{"product_id":"stance-xr1-coilovers-1990-1996-nissan-300zx","title":"Stance XR1 Coilovers for 1990-1996 Nissan 300ZX (Z32)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1990-1996 Nissan 300ZX (Z32) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your Z32 Nissan 300ZX — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1990-1996 Nissan 300ZX.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1990-1996 Nissan 300ZX for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your Z32 Nissan 300ZX on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the Z32 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the Z32 Nissan 300ZX chassis so the coilovers bolt onto your 1990-1996 Nissan 300ZX ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your Z32 Nissan 300ZX.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-Z32-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1990-1996 Nissan 300ZX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eZ32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1990 Nissan 300ZX RWD (Z32)\u003c\/li\u003e\n\u003cli\u003e1991 Nissan 300ZX RWD (Z32)\u003c\/li\u003e\n\u003cli\u003e1992 Nissan 300ZX RWD (Z32)\u003c\/li\u003e\n\u003cli\u003e1993 Nissan 300ZX RWD (Z32)\u003c\/li\u003e\n\u003cli\u003e1994 Nissan 300ZX RWD (Z32)\u003c\/li\u003e\n\u003cli\u003e1995 Nissan 300ZX RWD (Z32)\u003c\/li\u003e\n\u003cli\u003e1996 Nissan 300ZX RWD (Z32)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184973656124,"sku":"ST-Z32-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1990-1996-nissan-300zx-z32-st-z32-xr1-1194427868.jpg?v=1769698717"},{"product_id":"stance-xr1-coilovers-2003-2009-nissan-350z","title":"Stance XR1 Coilovers for 2003-2009 Nissan 350Z (Z33)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2003-2009 Nissan 350Z (Z33) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your Z33 Nissan 350Z — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2003-2009 Nissan 350Z.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2003-2009 Nissan 350Z for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your Z33 Nissan 350Z on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the Z33 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the Z33 Nissan 350Z chassis so the coilovers bolt onto your 2003-2009 Nissan 350Z ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your Z33 Nissan 350Z.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-Z33-XR1-OEM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2003-2009 Nissan 350Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eZ33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003eOEM-type spring (factory location)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eDivorced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eIncludes spring and adj. perch for OEM location\u003c\/li\u003e\n\u003cli\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003 Nissan 350Z RWD (Z33)\u003c\/li\u003e\n\u003cli\u003e2004 Nissan 350Z RWD (Z33)\u003c\/li\u003e\n\u003cli\u003e2005 Nissan 350Z RWD (Z33)\u003c\/li\u003e\n\u003cli\u003e2006 Nissan 350Z RWD (Z33)\u003c\/li\u003e\n\u003cli\u003e2007 Nissan 350Z RWD (Z33)\u003c\/li\u003e\n\u003cli\u003e2008 Nissan 350Z RWD (Z33)\u003c\/li\u003e\n\u003cli\u003e2009 Nissan 350Z RWD (Z33)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eImportant Fitment Note:\u003c\/em\u003e The rear assembly retains the OEM spring location. An adjustable spring perch is included for ride-height adjustment.\u003c\/p\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184973754428,"sku":"ST-Z33-XR1-OEM","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-2003-2009-nissan-350z-z33-st-z33-xr1-oem-1194427235.jpg?v=1768078570"},{"product_id":"stance-xr1-coilovers-2009-2018-nissan-370z","title":"Stance XR1 Coilovers (True Rear) for 2009-2020 Nissan 370Z (Z34)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 2009-2020 Nissan 370Z (Z34) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your Z34 Nissan 370Z — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 2009-2020 Nissan 370Z.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 2009-2020 Nissan 370Z for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your Z34 Nissan 370Z on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the Z34 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the Z34 Nissan 370Z chassis so the coilovers bolt onto your 2009-2020 Nissan 370Z ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your Z34 Nissan 370Z.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-Z34-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2009-2020 Nissan 370Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eZ34\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e14 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e7 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eTrue rear coilover, deletes OEM spring location\u003c\/li\u003e\n\u003cli\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2009 Nissan 370Z RWD (Z34)\u003c\/li\u003e\n\u003cli\u003e2010 Nissan 370Z RWD (Z34)\u003c\/li\u003e\n\u003cli\u003e2011 Nissan 370Z RWD (Z34)\u003c\/li\u003e\n\u003cli\u003e2012 Nissan 370Z RWD (Z34)\u003c\/li\u003e\n\u003cli\u003e2013 Nissan 370Z RWD (Z34)\u003c\/li\u003e\n\u003cli\u003e2014 Nissan 370Z RWD (Z34)\u003c\/li\u003e\n\u003cli\u003e2015 Nissan 370Z RWD (Z34)\u003c\/li\u003e\n\u003cli\u003e2016 Nissan 370Z RWD (Z34)\u003c\/li\u003e\n\u003cli\u003e2017 Nissan 370Z RWD (Z34)\u003c\/li\u003e\n\u003cli\u003e2018 Nissan 370Z RWD (Z34)\u003c\/li\u003e\n\u003cli\u003e2019 Nissan 370Z RWD (Z34)\u003c\/li\u003e\n\u003cli\u003e2020 Nissan 370Z RWD (Z34)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eImportant Fitment Note:\u003c\/em\u003e The rear coilover deletes the OEM spring location and replaces it with a true coilover assembly. Confirm fitment with your installer before ordering if your vehicle has been previously modified.\u003c\/p\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184973787196,"sku":"ST-Z34-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-true-rear-for-2009-2020-nissan-370z-z34-st-z34-xr1-1194432529.jpg?v=1769750290"},{"product_id":"stance-xr1-coilovers-1989-1994-nissan-skyline-gt-r-r32","title":"Stance XR1 Coilovers for 1989-1994 Nissan Skyline GT-R (R32)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1989-1994 Nissan Skyline GT-R (R32) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your R32 Nissan Skyline GT-R — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1989-1994 Nissan Skyline GT-R.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1989-1994 Nissan Skyline GT-R for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your R32 Nissan Skyline GT-R on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the R32 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the R32 Nissan Skyline GT-R chassis so the coilovers bolt onto your 1989-1994 Nissan Skyline GT-R ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your R32 Nissan Skyline GT-R.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-BNR32-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1989-1994 Nissan Skyline GT-R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eR32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e9 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e7 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1989 Nissan Skyline GT-R AWD (R32)\u003c\/li\u003e\n\u003cli\u003e1990 Nissan Skyline GT-R AWD (R32)\u003c\/li\u003e\n\u003cli\u003e1991 Nissan Skyline GT-R AWD (R32)\u003c\/li\u003e\n\u003cli\u003e1992 Nissan Skyline GT-R AWD (R32)\u003c\/li\u003e\n\u003cli\u003e1993 Nissan Skyline GT-R AWD (R32)\u003c\/li\u003e\n\u003cli\u003e1994 Nissan Skyline GT-R AWD (R32)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184973819964,"sku":"ST-BNR32-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1989-1994-nissan-skyline-gt-r-r32-st-bnr32-xr1-1194427877.jpg?v=1768253680"},{"product_id":"stance-xr1-coilovers-1995-1998-nissan-skyline-gt-r-r33","title":"Stance XR1 Coilovers for 1995-1998 Nissan Skyline GT-R (R33)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1995-1998 Nissan Skyline GT-R (R33) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your R33 Nissan Skyline GT-R — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1995-1998 Nissan Skyline GT-R.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1995-1998 Nissan Skyline GT-R for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your R33 Nissan Skyline GT-R on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the R33 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the R33 Nissan Skyline GT-R chassis so the coilovers bolt onto your 1995-1998 Nissan Skyline GT-R ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your R33 Nissan Skyline GT-R.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-BNR33-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1995-1998 Nissan Skyline GT-R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eR33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1995 Nissan Skyline GT-R AWD (R33)\u003c\/li\u003e\n\u003cli\u003e1996 Nissan Skyline GT-R AWD (R33)\u003c\/li\u003e\n\u003cli\u003e1997 Nissan Skyline GT-R AWD (R33)\u003c\/li\u003e\n\u003cli\u003e1998 Nissan Skyline GT-R AWD (R33)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184973951036,"sku":"ST-BNR33-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1995-1998-nissan-skyline-gt-r-r33-st-bnr33-xr1-1194427280.jpg?v=1767938317"},{"product_id":"stance-xr1-coilovers-1999-2002-nissan-skyline-gt-r-r34","title":"Stance XR1 Coilovers for 1999-2002 Nissan Skyline GT-R (R34)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1999-2002 Nissan Skyline GT-R (R34) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your R34 Nissan Skyline GT-R — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1999-2002 Nissan Skyline GT-R.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1999-2002 Nissan Skyline GT-R for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your R34 Nissan Skyline GT-R on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the R34 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the R34 Nissan Skyline GT-R chassis so the coilovers bolt onto your 1999-2002 Nissan Skyline GT-R ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your R34 Nissan Skyline GT-R.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-BNR34-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1999-2002 Nissan Skyline GT-R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eR34\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e12 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e10 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1999 Nissan Skyline GT-R AWD (R34)\u003c\/li\u003e\n\u003cli\u003e2000 Nissan Skyline GT-R AWD (R34)\u003c\/li\u003e\n\u003cli\u003e2001 Nissan Skyline GT-R AWD (R34)\u003c\/li\u003e\n\u003cli\u003e2002 Nissan Skyline GT-R AWD (R34)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184973983804,"sku":"ST-BNR34-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1999-2002-nissan-skyline-gt-r-r34-st-bnr34-xr1-1194427572.jpg?v=1768246691"},{"product_id":"stance-xr1-coilovers-1989-1993-nissan-skyline-gt-s-r32","title":"Stance XR1 Coilovers for 1989-1993 Nissan Skyline GT-S (R32)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1989-1993 Nissan Skyline GT-S (R32) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your R32 Nissan Skyline GT-S — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1989-1993 Nissan Skyline GT-S.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1989-1993 Nissan Skyline GT-S for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your R32 Nissan Skyline GT-S on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the R32 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the R32 Nissan Skyline GT-S chassis so the coilovers bolt onto your 1989-1993 Nissan Skyline GT-S ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your R32 Nissan Skyline GT-S.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-HCR32-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1989-1993 Nissan Skyline GT-S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eR32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e6 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1989 Nissan Skyline GT-S RWD (R32)\u003c\/li\u003e\n\u003cli\u003e1990 Nissan Skyline GT-S RWD (R32)\u003c\/li\u003e\n\u003cli\u003e1991 Nissan Skyline GT-S RWD (R32)\u003c\/li\u003e\n\u003cli\u003e1992 Nissan Skyline GT-S RWD (R32)\u003c\/li\u003e\n\u003cli\u003e1993 Nissan Skyline GT-S RWD (R32)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184974278716,"sku":"ST-HCR32-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1989-1993-nissan-skyline-gt-s-r32-st-hcr32-xr1-1194396435.jpg?v=1767470289"},{"product_id":"stance-xr1-coilovers-1993-1998-nissan-skyline-gt-s-r33","title":"Stance XR1 Coilovers for 1993-1998 Nissan Skyline GT-S (R33)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1993-1998 Nissan Skyline GT-S (R33) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your R33 Nissan Skyline GT-S — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1993-1998 Nissan Skyline GT-S.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1993-1998 Nissan Skyline GT-S for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your R33 Nissan Skyline GT-S on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the R33 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the R33 Nissan Skyline GT-S chassis so the coilovers bolt onto your 1993-1998 Nissan Skyline GT-S ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your R33 Nissan Skyline GT-S.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-ECR33-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1993-1998 Nissan Skyline GT-S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eR33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e7 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1993 Nissan Skyline GT-S RWD (R33)\u003c\/li\u003e\n\u003cli\u003e1994 Nissan Skyline GT-S RWD (R33)\u003c\/li\u003e\n\u003cli\u003e1995 Nissan Skyline GT-S RWD (R33)\u003c\/li\u003e\n\u003cli\u003e1996 Nissan Skyline GT-S RWD (R33)\u003c\/li\u003e\n\u003cli\u003e1997 Nissan Skyline GT-S RWD (R33)\u003c\/li\u003e\n\u003cli\u003e1998 Nissan Skyline GT-S RWD (R33)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184974671932,"sku":"ST-ECR33-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1993-1998-nissan-skyline-gt-s-r33-st-ecr33-xr1-1194427257.jpg?v=1769615890"},{"product_id":"stance-xr1-coilovers-1998-2001-nissan-skyline-gt-s-r34","title":"Stance XR1 Coilovers for 1998-2001 Nissan Skyline GTS (R34)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1998-2001 Nissan Skyline GTS (R34) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your R34 Nissan Skyline GTS — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1998-2001 Nissan Skyline GTS.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1998-2001 Nissan Skyline GTS for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your R34 Nissan Skyline GTS on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the R34 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the R34 Nissan Skyline GTS chassis so the coilovers bolt onto your 1998-2001 Nissan Skyline GTS ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your R34 Nissan Skyline GTS.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-ER34-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1998-2001 Nissan Skyline GTS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eR34\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e8 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e7 kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSwift Springs upgrade available for an additional $300.00 (pair). Contact us to add.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1998 Nissan Skyline GTS RWD (R34)\u003c\/li\u003e\n\u003cli\u003e1999 Nissan Skyline GTS RWD (R34)\u003c\/li\u003e\n\u003cli\u003e2000 Nissan Skyline GTS RWD (R34)\u003c\/li\u003e\n\u003cli\u003e2001 Nissan Skyline GTS RWD (R34)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184974803004,"sku":"ST-ER34-XR1","price":1795.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1998-2001-nissan-skyline-gt-s-r34-st-er34-xr1-1194398705.jpg?v=1767525578"},{"product_id":"stance-xr1-coilovers-1997-2005-porsche-911","title":"Stance XR1 Coilovers for 1997-2005 Porsche 911 (996)","description":"\u003cp\u003eThe Stance XR1 coilovers for the 1997-2005 Porsche 911 (996) are the single-way adjustable, daily-driveable Stance coilovers built for owners who want one suspension setup that handles the commute, the canyon, and the occasional track day. Every Stance Suspension XR1 kit is dyno-tested at the Stance facility in Texas and shipped ready to install on your 996 Porsche 911 — including dialed-in spring rates, fully adjustable damping, and independent ride-height adjustment on coilover bodies engineered specifically for the 1997-2005 Porsche 911.\u003c\/p\u003e\u003cp\u003eThe XR1 line replaces Stance's older Super Sport coilovers with stronger materials, a wider damping adjustment range, and Stance's most durable corrosion-resistant coating to date. Whether you're lowering a 1997-2005 Porsche 911 for the look or chasing lap times at your local track, the Stance XR1 coilovers give you a 100% rebuildable, revalvable suspension platform that grows with your build — serviceable and upgradeable at the Stance Suspension shop for the life of the vehicle.\u003c\/p\u003e\u003cp\u003eLooking to lower your 996 Porsche 911 on a set of adjustable Stance coilovers? The Stance XR1 coilovers drop the 996 chassis to a tunable ride height while keeping your factory suspension geometry intact. Spring rates and damping are pre-tuned for the 996 Porsche 911 chassis so the coilovers bolt onto your 1997-2005 Porsche 911 ready to install. Independent ride-height and damping adjustment let you fine-tune the lowered stance, or dial the chassis in for autocross, track, or daily driving on your 996 Porsche 911.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 levels of damping adjustment, single-knob clicker on each corner\u003c\/li\u003e\n\u003cli\u003eInverted monotube front damper with 45mm shaft for racing-grade rigidity\u003c\/li\u003e\n\u003cli\u003eDigressive valving — sharp low-speed control, smooth high-speed compliance\u003c\/li\u003e\n\u003cli\u003ePillowball front top mounts for direct steering response\u003c\/li\u003e\n\u003cli\u003eHeat-treated chromoly piston rod and CNC-machined T6061 aluminum brackets\u003c\/li\u003e\n\u003cli\u003eTwo-stage zinc + electrodeposited coating, 1,000+ hour salt-spray rated\u003c\/li\u003e\n\u003cli\u003e100% rebuildable and revalvable at Stance Suspension's Texas facility\u003c\/li\u003e\n\u003cli\u003eSwift Springs and helper-spring upgrades available — contact us to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Levels of Damping Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe Stance damping clicker gives a positive, audible click for each of the 16 levels of damping adjustment, so you can dial the ride from compliant street settings to firm track settings without losing your reference point. Each corner adjusts independently for precise chassis balance.\u003c\/p\u003e\n\u003ch3\u003eInverted Monotube Damper\u003c\/h3\u003e\n\u003cp\u003eOriginally developed for professional motorsports, the inverted monotube design uses a 45mm strut shaft for far greater lateral rigidity than competitors' 20mm upright dampers. Less shaft flex means consistent damping under heavy load, longer seal life, and exceptional ride comfort without sacrificing track performance.\u003c\/p\u003e\n\u003ch3\u003eDigressive Damping\u003c\/h3\u003e\n\u003cp\u003eDigressive valving produces high damping forces at low shaft velocities for sharp chassis control, and softer forces at high shaft velocities to absorb big bumps without unsettling the car. The result: better feel on transitions, more grip on rough surfaces.\u003c\/p\u003e\n\u003ch3\u003eTwo-Stage Corrosion-Resistant Coating\u003c\/h3\u003e\n\u003cp\u003eDamper bodies are finished with a zinc phosphate pre-treatment plus an electrodeposited polymer coating engineered specifically for Stance coilovers. The finish has cleared 1,000+ hours of salt-spray testing — Stance's most durable corrosion protection to date.\u003c\/p\u003e\n\u003ch3\u003eRebuildable \u0026amp; Revalvable for Life\u003c\/h3\u003e\n\u003cp\u003eStance XR1 coilovers are 100% rebuildable and revalvable. As your driving evolves from street to track, send the same hardware back to Stance's Texas facility for service or custom valving. Buy once, upgrade as you grow.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"table table-striped table-primary\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eST-996-XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eStance XR1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1997-2005 Porsche 911\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003e996\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Adjustment\u003c\/td\u003e\n\u003ctd\u003e1-Way · 16 Levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRide-Height Adjustable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Front\u003c\/td\u003e\n\u003ctd\u003e— kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate - Rear\u003c\/td\u003e\n\u003ctd\u003e— kg\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Front\u003c\/td\u003e\n\u003ctd\u003eSolid pillowball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Mount - Rear\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Front\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Type - Rear\u003c\/td\u003e\n\u003ctd\u003eUpright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Front\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension Design - Rear\u003c\/td\u003e\n\u003ctd\u003eTrue Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Front\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Plates - Rear\u003c\/td\u003e\n\u003ctd\u003eNot Applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1997 Porsche 911 RWD (996)\u003c\/li\u003e\n\u003cli\u003e1998 Porsche 911 RWD (996)\u003c\/li\u003e\n\u003cli\u003e1999 Porsche 911 RWD (996)\u003c\/li\u003e\n\u003cli\u003e2000 Porsche 911 RWD (996)\u003c\/li\u003e\n\u003cli\u003e2001 Porsche 911 RWD (996)\u003c\/li\u003e\n\u003cli\u003e2002 Porsche 911 RWD (996)\u003c\/li\u003e\n\u003cli\u003e2003 Porsche 911 RWD (996)\u003c\/li\u003e\n\u003cli\u003e2004 Porsche 911 RWD (996)\u003c\/li\u003e\n\u003cli\u003e2005 Porsche 911 RWD (996)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stance","offers":[{"title":"Default Title","offer_id":40184974934076,"sku":"ST-996-XR1","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/stance-xr1-coilovers-for-1997-2005-porsche-911-996-st-996-xr1-1194398397.jpg?v=1767516879"}],"url":"https:\/\/www.springrates.com\/collections\/stance-coilovers.oembed?page=5","provider":"SPRINGRATES®","version":"1.0","type":"link"}