{"title":"Chassis Reinforcement","description":"","products":[{"product_id":"voodoo13-differential-conversion-bushings-1989-1994-nissan-240sx-s13","title":"Voodoo13 Solid Differential Bushings for 1989-1994 Nissan 240SX RWD","description":"\u003cp\u003eEliminate differential deflection on your Nissan 240SX with Voodoo13 solid differential bushings. The soft rubber OEM bushings let the diff rotate under power, stealing thrust; solid billet aluminum holds it dead-still so every Nm lands at the tires.\u003c\/p\u003e\n\u003cp\u003eSolid 6061-T6 billet aluminum construction totally removes rubber compliance for bulletproof diff pinion angle under power. Direct bolt-in, limited lifetime warranty, USA made.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eProvides stability during hard launching and\/or initiating drift\u003c\/li\u003e\n  \u003cli\u003eEliminates play from the soft rubber OEM bushings\u003c\/li\u003e\n  \u003cli\u003eAssists in reducing wheel hop\u003c\/li\u003e\n  \u003cli\u003eGreatly improves power transfer to the pavement\u003c\/li\u003e\n  \u003cli\u003eClass 10.9 hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Differential Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400884\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eConversion bushings to adapt S14, S15, Z32, J30, Skyline differential\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1989 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1990 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1991 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1992 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1993 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1994 Nissan 240SX RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185402982460,"sku":"SDNS-0100","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-differential-conversion-bushings-1989-1994-nissan-240sx-s13-sdns-0100-1194432609.jpg?v=1769699772"},{"product_id":"voodoo13-differential-bushings-1995-1998-nissan-240sx-s14","title":"Voodoo13 Solid Differential Bushings for 1995-1998 Nissan 240SX RWD","description":"\u003cp\u003eEliminate differential deflection on your Nissan 240SX with Voodoo13 solid differential bushings. The soft rubber OEM bushings let the diff rotate under power, stealing thrust; solid billet aluminum holds it dead-still so every Nm lands at the tires.\u003c\/p\u003e\n\u003cp\u003eSolid 6061-T6 billet aluminum construction totally removes rubber compliance for bulletproof diff pinion angle under power. Direct bolt-in, limited lifetime warranty, USA made.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eProvides stability during hard launching and\/or initiating drift\u003c\/li\u003e\n  \u003cli\u003eEliminates play from the soft rubber OEM bushings\u003c\/li\u003e\n  \u003cli\u003eAssists in reducing wheel hop\u003c\/li\u003e\n  \u003cli\u003eGreatly improves power transfer to the pavement\u003c\/li\u003e\n  \u003cli\u003eClass 10.9 hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Differential Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400891\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1995 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1996 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1997 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1998 Nissan 240SX RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185403113532,"sku":"SDNS-0200","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-differential-bushings-1995-1998-nissan-240sx-s14-sdns-0200-1194425342.jpg?v=1768200341"},{"product_id":"voodoo13-differential-bushings-1990-1996-nissan-300zx","title":"Voodoo13 Solid Differential Bushings for 1990-1996 Nissan 300ZX RWD","description":"\u003cp\u003eEliminate differential deflection on your Nissan 300ZX with Voodoo13 solid differential bushings. The soft rubber OEM bushings let the diff rotate under power, stealing thrust; solid billet aluminum holds it dead-still so every Nm lands at the tires.\u003c\/p\u003e\n\u003cp\u003eSolid 6061-T6 billet aluminum construction totally removes rubber compliance for bulletproof diff pinion angle under power. Direct bolt-in, limited lifetime warranty, USA made.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCNC-machined 6061-T6 billet aluminum construction\u003c\/li\u003e\n  \u003cli\u003eSealed QA1 motorsport-grade rod ends\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 zinc-plated hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Differential Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1990 Nissan 300ZX RWD\u003c\/li\u003e\n  \u003cli\u003e1991 Nissan 300ZX RWD\u003c\/li\u003e\n  \u003cli\u003e1992 Nissan 300ZX RWD\u003c\/li\u003e\n  \u003cli\u003e1993 Nissan 300ZX RWD\u003c\/li\u003e\n  \u003cli\u003e1994 Nissan 300ZX RWD\u003c\/li\u003e\n  \u003cli\u003e1995 Nissan 300ZX RWD\u003c\/li\u003e\n  \u003cli\u003e1996 Nissan 300ZX RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185403244604,"sku":"SDNS-0200","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-differential-bushings-1990-1996-nissan-300zx-sdns-0200-1194425341.jpg?v=1768200313"},{"product_id":"voodoo13-differential-bushings-1999-2002-nissan-240sx-s15","title":"Voodoo13 Solid Differential Bushings for 1999-2002 Nissan 240SX S15 RWD","description":"\u003cp\u003eEliminate differential deflection on your Nissan 240SX S15 with Voodoo13 solid differential bushings. The soft rubber OEM bushings let the diff rotate under power, stealing thrust; solid billet aluminum holds it dead-still so every Nm lands at the tires.\u003c\/p\u003e\n\u003cp\u003eSolid 6061-T6 billet aluminum construction totally removes rubber compliance for bulletproof diff pinion angle under power. Direct bolt-in, limited lifetime warranty, USA made.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCNC-machined 6061-T6 billet aluminum construction\u003c\/li\u003e\n  \u003cli\u003eSealed QA1 motorsport-grade rod ends\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 zinc-plated hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Differential Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1999 Nissan 240SX S15 RWD\u003c\/li\u003e\n  \u003cli\u003e2000 Nissan 240SX S15 RWD\u003c\/li\u003e\n  \u003cli\u003e2001 Nissan 240SX S15 RWD\u003c\/li\u003e\n  \u003cli\u003e2002 Nissan 240SX S15 RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185403342908,"sku":"SDNS-0200","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-differential-bushings-1999-2002-nissan-240sx-s15-sdns-0200-1194425345.jpg?v=1768200372"},{"product_id":"voodoo13-adjustable-end-links-front-or-rear-1999-2005-mazda-miata","title":"Voodoo13 Adjustable End Links (Front) for 1999-2005 Mazda Miata RWD","description":"\u003cp\u003eUpgrade the worn stock sway bar end links on your Mazda Miata with Voodoo13 adjustable end links. Length adjustability removes preload from stiffer aftermarket sway bars, and the high-misalignment rod ends hold up under aggressive driving loads where factory plastic ends would bind and fail.\u003c\/p\u003e\n\u003cp\u003eVoodoo13 CNC-machines the body from 6061-T6 aluminum, fits QA1 sealed nylon\/PTFE rod ends to keep grit out, and finishes the kit with Grade 10.9 zinc-plated hardware. 65 degrees of misalignment lets the end link work with lowered ride heights without binding, and every kit is designed and manufactured in the USA with a limited lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e65 degrees of misalignment\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality Grade 303 Stainless Steel misalignment spacers\u003c\/li\u003e\n  \u003cli\u003e6061 aluminum anodized hex adjusting rod\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 zinc plated hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned and Manufactured in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eAdjustable End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400013\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1999 Mazda Miata RWD\u003c\/li\u003e\n  \u003cli\u003e2000 Mazda Miata RWD\u003c\/li\u003e\n  \u003cli\u003e2001 Mazda Miata RWD\u003c\/li\u003e\n  \u003cli\u003e2002 Mazda Miata RWD\u003c\/li\u003e\n  \u003cli\u003e2003 Mazda Miata RWD\u003c\/li\u003e\n  \u003cli\u003e2004 Mazda Miata RWD\u003c\/li\u003e\n  \u003cli\u003e2005 Mazda Miata RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185403441212,"sku":"ADEL-0300","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-end-links-front-or-rear-1999-2005-mazda-miata-adel-0300-1194432574.jpg?v=1769750531"},{"product_id":"voodoo13-adjustable-end-links-rear-2003-2007-infiniti-g35-coupe","title":"Voodoo13 Adjustable End Links (Rear) for 2003-2006 Infiniti G35 RWD","description":"\u003cp\u003eUpgrade the worn stock sway bar end links on your Infiniti G35 with Voodoo13 adjustable end links. Length adjustability removes preload from stiffer aftermarket sway bars, and the high-misalignment rod ends hold up under aggressive driving loads where factory plastic ends would bind and fail.\u003c\/p\u003e\n\u003cp\u003eVoodoo13 CNC-machines the body from 6061-T6 aluminum, fits QA1 sealed nylon\/PTFE rod ends to keep grit out, and finishes the kit with Grade 10.9 zinc-plated hardware. 65 degrees of misalignment lets the end link work with lowered ride heights without binding, and every kit is designed and manufactured in the USA with a limited lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e65 degrees of misalignment\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality Grade 303 Stainless Steel misalignment spacers\u003c\/li\u003e\n  \u003cli\u003e6061 aluminum anodized hex adjusting rod\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 zinc plated hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned and Manufactured in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eAdjustable End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400013\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2003 Infiniti G35 RWD — Sedan\u003c\/li\u003e\n  \u003cli\u003e2004 Infiniti G35 RWD — Sedan\u003c\/li\u003e\n  \u003cli\u003e2005 Infiniti G35 RWD — Sedan\u003c\/li\u003e\n  \u003cli\u003e2006 Infiniti G35 RWD — Sedan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185403572284,"sku":"ADEL-0300","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-end-links-rear-2003-2007-infiniti-g35-coupe-adel-0300-1194396471.jpg?v=1769532697"},{"product_id":"voodoo13-adjustable-end-links-rear-2003-2006-infiniti-g35-sedan","title":"Voodoo13 Adjustable End Links (Rear) for 2003-2007 Infiniti G35 RWD","description":"\u003cp\u003eUpgrade the worn stock sway bar end links on your Infiniti G35 with Voodoo13 adjustable end links. Length adjustability removes preload from stiffer aftermarket sway bars, and the high-misalignment rod ends hold up under aggressive driving loads where factory plastic ends would bind and fail.\u003c\/p\u003e\n\u003cp\u003eVoodoo13 CNC-machines the body from 6061-T6 aluminum, fits QA1 sealed nylon\/PTFE rod ends to keep grit out, and finishes the kit with Grade 10.9 zinc-plated hardware. 65 degrees of misalignment lets the end link work with lowered ride heights without binding, and every kit is designed and manufactured in the USA with a limited lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e65 degrees of misalignment\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality Grade 303 Stainless Steel misalignment spacers\u003c\/li\u003e\n  \u003cli\u003e6061 aluminum anodized hex adjusting rod\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 zinc plated hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned and Manufactured in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eAdjustable End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400013\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2003 Infiniti G35 RWD — Coupe\u003c\/li\u003e\n  \u003cli\u003e2004 Infiniti G35 RWD — Coupe\u003c\/li\u003e\n  \u003cli\u003e2005 Infiniti G35 RWD — Coupe\u003c\/li\u003e\n  \u003cli\u003e2006 Infiniti G35 RWD — Coupe\u003c\/li\u003e\n  \u003cli\u003e2007 Infiniti G35 RWD — Coupe\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185403670588,"sku":"ADEL-0300","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-end-links-rear-2003-2006-infiniti-g35-sedan-adel-0300-1194426597.jpg?v=1768230433"},{"product_id":"voodoo13-adjustable-end-links-rear-2008-infiniti-g37","title":"Voodoo13 Adjustable End Links (Rear) for 2008-2019 Infiniti G37 RWD","description":"\u003cp\u003eUpgrade the worn stock sway bar end links on your Infiniti G37 with Voodoo13 adjustable end links. Length adjustability removes preload from stiffer aftermarket sway bars, and the high-misalignment rod ends hold up under aggressive driving loads where factory plastic ends would bind and fail.\u003c\/p\u003e\n\u003cp\u003eVoodoo13 CNC-machines the body from 6061-T6 aluminum, fits QA1 sealed nylon\/PTFE rod ends to keep grit out, and finishes the kit with Grade 10.9 zinc-plated hardware. 65 degrees of misalignment lets the end link work with lowered ride heights without binding, and every kit is designed and manufactured in the USA with a limited lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e65 degrees of misalignment\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality Grade 303 Stainless Steel misalignment spacers\u003c\/li\u003e\n  \u003cli\u003e6061 aluminum anodized hex adjusting rod\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 zinc plated hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned and Manufactured in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eAdjustable End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400013\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2008 Infiniti G37 RWD\u003c\/li\u003e\n  \u003cli\u003e2009 Infiniti G37 RWD\u003c\/li\u003e\n  \u003cli\u003e2010 Infiniti G37 RWD\u003c\/li\u003e\n  \u003cli\u003e2011 Infiniti G37 RWD\u003c\/li\u003e\n  \u003cli\u003e2012 Infiniti G37 RWD\u003c\/li\u003e\n  \u003cli\u003e2013 Infiniti G37 RWD\u003c\/li\u003e\n  \u003cli\u003e2014 Infiniti G37 RWD\u003c\/li\u003e\n  \u003cli\u003e2015 Infiniti G37 RWD\u003c\/li\u003e\n  \u003cli\u003e2016 Infiniti G37 RWD\u003c\/li\u003e\n  \u003cli\u003e2017 Infiniti G37 RWD\u003c\/li\u003e\n  \u003cli\u003e2018 Infiniti G37 RWD\u003c\/li\u003e\n  \u003cli\u003e2019 Infiniti G37 RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185403801660,"sku":"ADEL-0300","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-end-links-rear-2008-infiniti-g37-adel-0300-1194432580.jpg?v=1768428131"},{"product_id":"voodoo13-adjustable-end-links-rear-2003-2008-nissan-350z","title":"Voodoo13 Adjustable End Links (Rear) for 2003-2009 Nissan 350Z RWD","description":"\u003cp\u003eUpgrade the worn stock sway bar end links on your Nissan 350Z with Voodoo13 adjustable end links. Length adjustability removes preload from stiffer aftermarket sway bars, and the high-misalignment rod ends hold up under aggressive driving loads where factory plastic ends would bind and fail.\u003c\/p\u003e\n\u003cp\u003eVoodoo13 CNC-machines the body from 6061-T6 aluminum, fits QA1 sealed nylon\/PTFE rod ends to keep grit out, and finishes the kit with Grade 10.9 zinc-plated hardware. 65 degrees of misalignment lets the end link work with lowered ride heights without binding, and every kit is designed and manufactured in the USA with a limited lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e65 degrees of misalignment\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality Grade 303 Stainless Steel misalignment spacers\u003c\/li\u003e\n  \u003cli\u003e6061 aluminum anodized hex adjusting rod\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 zinc plated hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned and Manufactured in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eAdjustable End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400013\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2003 Nissan 350Z RWD\u003c\/li\u003e\n  \u003cli\u003e2004 Nissan 350Z RWD\u003c\/li\u003e\n  \u003cli\u003e2005 Nissan 350Z RWD\u003c\/li\u003e\n  \u003cli\u003e2006 Nissan 350Z RWD\u003c\/li\u003e\n  \u003cli\u003e2007 Nissan 350Z RWD\u003c\/li\u003e\n  \u003cli\u003e2008 Nissan 350Z RWD\u003c\/li\u003e\n  \u003cli\u003e2009 Nissan 350Z RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185403899964,"sku":"ADEL-0300","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-end-links-rear-2003-2008-nissan-350z-z33-adel-0300-1194426596.jpg?v=1768229710"},{"product_id":"voodoo13-adjustable-end-links-rear-2009-nissan-370z","title":"Voodoo13 Adjustable End Links (Rear) for 2008-2019 Nissan 370Z RWD","description":"\u003cp\u003eUpgrade the worn stock sway bar end links on your Nissan 370Z with Voodoo13 adjustable end links. Length adjustability removes preload from stiffer aftermarket sway bars, and the high-misalignment rod ends hold up under aggressive driving loads where factory plastic ends would bind and fail.\u003c\/p\u003e\n\u003cp\u003eVoodoo13 CNC-machines the body from 6061-T6 aluminum, fits QA1 sealed nylon\/PTFE rod ends to keep grit out, and finishes the kit with Grade 10.9 zinc-plated hardware. 65 degrees of misalignment lets the end link work with lowered ride heights without binding, and every kit is designed and manufactured in the USA with a limited lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e65 degrees of misalignment\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality Grade 303 Stainless Steel misalignment spacers\u003c\/li\u003e\n  \u003cli\u003e6061 aluminum anodized hex adjusting rod\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 zinc plated hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned and Manufactured in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eAdjustable End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400013\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2008 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2009 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2010 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2011 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2012 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2013 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2014 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2015 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2016 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2017 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2018 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2019 Nissan 370Z RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185403998268,"sku":"ADEL-0300","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-end-links-rear-2009-2020-nissan-370z-z34-adel-0300-1194395018.jpg?v=1767436118"},{"product_id":"voodoo13-adjustable-end-links-rear-2013-2016-scion-fr-s","title":"Voodoo13 Adjustable End Links (Rear) for 2013-2016 Scion FR-S RWD","description":"\u003cp\u003eUpgrade the worn stock sway bar end links on your Scion FR-S with Voodoo13 adjustable end links. Length adjustability removes preload from stiffer aftermarket sway bars, and the high-misalignment rod ends hold up under aggressive driving loads where factory plastic ends would bind and fail.\u003c\/p\u003e\n\u003cp\u003eVoodoo13 CNC-machines the body from 6061-T6 aluminum, fits QA1 sealed nylon\/PTFE rod ends to keep grit out, and finishes the kit with Grade 10.9 zinc-plated hardware. 65 degrees of misalignment lets the end link work with lowered ride heights without binding, and every kit is designed and manufactured in the USA with a limited lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e65 degrees of misalignment\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality Grade 303 Stainless Steel misalignment spacers\u003c\/li\u003e\n  \u003cli\u003e6061 aluminum anodized hex adjusting rod\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 zinc plated hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned and Manufactured in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eAdjustable End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400006\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2013 Scion FR-S RWD\u003c\/li\u003e\n  \u003cli\u003e2014 Scion FR-S RWD\u003c\/li\u003e\n  \u003cli\u003e2015 Scion FR-S RWD\u003c\/li\u003e\n  \u003cli\u003e2016 Scion FR-S RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185404096572,"sku":"ADEL-0100","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-end-links-rear-2013-2016-scion-fr-s-adel-0100-1194426816.jpg?v=1768234359"},{"product_id":"voodoo13-adjustable-end-links-rear-2013-2020-subaru-brz-zc6","title":"Voodoo13 Adjustable End Links (Rear) for 2012-2020 Subaru BRZ RWD","description":"\u003cp\u003eUpgrade the worn stock sway bar end links on your Subaru BRZ with Voodoo13 adjustable end links. Length adjustability removes preload from stiffer aftermarket sway bars, and the high-misalignment rod ends hold up under aggressive driving loads where factory plastic ends would bind and fail.\u003c\/p\u003e\n\u003cp\u003eVoodoo13 CNC-machines the body from 6061-T6 aluminum, fits QA1 sealed nylon\/PTFE rod ends to keep grit out, and finishes the kit with Grade 10.9 zinc-plated hardware. 65 degrees of misalignment lets the end link work with lowered ride heights without binding, and every kit is designed and manufactured in the USA with a limited lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e65 degrees of misalignment\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality Grade 303 Stainless Steel misalignment spacers\u003c\/li\u003e\n  \u003cli\u003e6061 aluminum anodized hex adjusting rod\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 zinc plated hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned and Manufactured in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eAdjustable End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400006\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2012 Subaru BRZ RWD\u003c\/li\u003e\n  \u003cli\u003e2013 Subaru BRZ RWD\u003c\/li\u003e\n  \u003cli\u003e2014 Subaru BRZ RWD\u003c\/li\u003e\n  \u003cli\u003e2015 Subaru BRZ RWD\u003c\/li\u003e\n  \u003cli\u003e2016 Subaru BRZ RWD\u003c\/li\u003e\n  \u003cli\u003e2017 Subaru BRZ RWD\u003c\/li\u003e\n  \u003cli\u003e2018 Subaru BRZ RWD\u003c\/li\u003e\n  \u003cli\u003e2019 Subaru BRZ RWD\u003c\/li\u003e\n  \u003cli\u003e2020 Subaru BRZ RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185404194876,"sku":"ADEL-0100","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-end-links-rear-2013-2020-subaru-brz-zc6-adel-0100-1194395812.jpg?v=1769529461"},{"product_id":"voodoo13-adjustable-end-links-rear-2009-2013-subaru-forester","title":"Voodoo13 Adjustable End Links (Rear) for 2009-2013 Subaru Forester AWD","description":"\u003cp\u003eUpgrade the worn stock sway bar end links on your Subaru Forester with Voodoo13 adjustable end links. Length adjustability removes preload from stiffer aftermarket sway bars, and the high-misalignment rod ends hold up under aggressive driving loads where factory plastic ends would bind and fail.\u003c\/p\u003e\n\u003cp\u003eVoodoo13 CNC-machines the body from 6061-T6 aluminum, fits QA1 sealed nylon\/PTFE rod ends to keep grit out, and finishes the kit with Grade 10.9 zinc-plated hardware. 65 degrees of misalignment lets the end link work with lowered ride heights without binding, and every kit is designed and manufactured in the USA with a limited lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e65 degrees of misalignment\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality Grade 303 Stainless Steel misalignment spacers\u003c\/li\u003e\n  \u003cli\u003e6061 aluminum anodized hex adjusting rod\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 zinc plated hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned and Manufactured in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eAdjustable End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400006\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eSH chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2009 Subaru Forester AWD — SH chassis\u003c\/li\u003e\n  \u003cli\u003e2010 Subaru Forester AWD — SH chassis\u003c\/li\u003e\n  \u003cli\u003e2011 Subaru Forester AWD — SH chassis\u003c\/li\u003e\n  \u003cli\u003e2012 Subaru Forester AWD — SH chassis\u003c\/li\u003e\n  \u003cli\u003e2013 Subaru Forester AWD — SH chassis\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185404325948,"sku":"ADEL-0100","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-end-links-rear-2009-2013-subaru-forester-adel-0100-1194357223.jpg?v=1769212838"},{"product_id":"voodoo13-adjustable-end-links-rear-2008-2014-subaru-impreza-wrx-sti","title":"Voodoo13 Adjustable End Links (Rear) for 2009-2010 Subaru Impreza AWD","description":"\u003cp\u003eUpgrade the worn stock sway bar end links on your Subaru Impreza with Voodoo13 adjustable end links. Length adjustability removes preload from stiffer aftermarket sway bars, and the high-misalignment rod ends hold up under aggressive driving loads where factory plastic ends would bind and fail.\u003c\/p\u003e\n\u003cp\u003eVoodoo13 CNC-machines the body from 6061-T6 aluminum, fits QA1 sealed nylon\/PTFE rod ends to keep grit out, and finishes the kit with Grade 10.9 zinc-plated hardware. 65 degrees of misalignment lets the end link work with lowered ride heights without binding, and every kit is designed and manufactured in the USA with a limited lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e65 degrees of misalignment\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality Grade 303 Stainless Steel misalignment spacers\u003c\/li\u003e\n  \u003cli\u003e6061 aluminum anodized hex adjusting rod\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 zinc plated hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned and Manufactured in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eAdjustable End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400006\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eHatchback and Sedan\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2009 Subaru Impreza AWD — Hatchback and Sedan\u003c\/li\u003e\n  \u003cli\u003e2010 Subaru Impreza AWD — Hatchback and Sedan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185404391484,"sku":"ADEL-0100","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-end-links-rear-2008-2014-subaru-impreza-wrx-sti-adel-0100-1194395193.jpg?v=1767440171"},{"product_id":"voodoo13-adjustable-end-links-rear-2010-2012-subaru-legacy","title":"Voodoo13 Adjustable End Links (Rear) for 2010-2012 Subaru Legacy AWD","description":"\u003cp\u003eUpgrade the worn stock sway bar end links on your Subaru Legacy with Voodoo13 adjustable end links. Length adjustability removes preload from stiffer aftermarket sway bars, and the high-misalignment rod ends hold up under aggressive driving loads where factory plastic ends would bind and fail.\u003c\/p\u003e\n\u003cp\u003eVoodoo13 CNC-machines the body from 6061-T6 aluminum, fits QA1 sealed nylon\/PTFE rod ends to keep grit out, and finishes the kit with Grade 10.9 zinc-plated hardware. 65 degrees of misalignment lets the end link work with lowered ride heights without binding, and every kit is designed and manufactured in the USA with a limited lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e65 degrees of misalignment\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality Grade 303 Stainless Steel misalignment spacers\u003c\/li\u003e\n  \u003cli\u003e6061 aluminum anodized hex adjusting rod\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 zinc plated hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned and Manufactured in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eAdjustable End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400006\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2010 Subaru Legacy AWD\u003c\/li\u003e\n  \u003cli\u003e2011 Subaru Legacy AWD\u003c\/li\u003e\n  \u003cli\u003e2012 Subaru Legacy AWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185404522556,"sku":"ADEL-0100","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-end-links-rear-2010-2012-subaru-legacy-adel-0100-1194426817.jpg?v=1769691098"},{"product_id":"voodoo13-adjustable-end-links-rear-2015-subaru-impreza-wrx-sti","title":"Voodoo13 Adjustable End Links (Rear) for 2015-2019 Subaru Impreza WRX AWD","description":"\u003cp\u003eUpgrade the worn stock sway bar end links on your Subaru WRX with Voodoo13 adjustable end links. Length adjustability removes preload from stiffer aftermarket sway bars, and the high-misalignment rod ends hold up under aggressive driving loads where factory plastic ends would bind and fail.\u003c\/p\u003e\n\u003cp\u003eVoodoo13 CNC-machines the body from 6061-T6 aluminum, fits QA1 sealed nylon\/PTFE rod ends to keep grit out, and finishes the kit with Grade 10.9 zinc-plated hardware. 65 degrees of misalignment lets the end link work with lowered ride heights without binding, and every kit is designed and manufactured in the USA with a limited lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e65 degrees of misalignment\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality Grade 303 Stainless Steel misalignment spacers\u003c\/li\u003e\n  \u003cli\u003e6061 aluminum anodized hex adjusting rod\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 zinc plated hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned and Manufactured in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eAdjustable End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400006\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eIncludes STI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2015 Subaru WRX AWD — Includes STI\u003c\/li\u003e\n  \u003cli\u003e2016 Subaru WRX AWD — Includes STI\u003c\/li\u003e\n  \u003cli\u003e2017 Subaru WRX AWD — Includes STI\u003c\/li\u003e\n  \u003cli\u003e2018 Subaru WRX AWD — Includes STI\u003c\/li\u003e\n  \u003cli\u003e2019 Subaru WRX AWD — Includes STI\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185404588092,"sku":"ADEL-0100","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-end-links-rear-2015-subaru-impreza-wrx-sti-adel-0100-1194432585.jpg?v=1768259078"},{"product_id":"voodoo13-differential-conversion-bushings-1989-1994-nissan-skyline-gts-t-r32-rwd","title":"Voodoo13 Solid Differential Bushings for 1989-1994 Nissan Skyline GTS-T RWD","description":"\u003cp\u003eEliminate differential deflection on your Nissan Skyline GTS-T with Voodoo13 solid differential bushings. The soft rubber OEM bushings let the diff rotate under power, stealing thrust; solid billet aluminum holds it dead-still so every Nm lands at the tires.\u003c\/p\u003e\n\u003cp\u003eSolid 6061-T6 billet aluminum construction totally removes rubber compliance for bulletproof diff pinion angle under power. Direct bolt-in, limited lifetime warranty, USA made.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eProvides stability during hard launching and\/or initiating drift\u003c\/li\u003e\n  \u003cli\u003eEliminates play from the soft rubber OEM bushings\u003c\/li\u003e\n  \u003cli\u003eAssists in reducing wheel hop\u003c\/li\u003e\n  \u003cli\u003eGreatly improves power transfer to the pavement\u003c\/li\u003e\n  \u003cli\u003eClass 10.9 hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Differential Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400884\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eConversion bushings to adapt S14, S15, Z32, J30, Skyline differential\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1989 Nissan Skyline GTS-T RWD\u003c\/li\u003e\n  \u003cli\u003e1990 Nissan Skyline GTS-T RWD\u003c\/li\u003e\n  \u003cli\u003e1991 Nissan Skyline GTS-T RWD\u003c\/li\u003e\n  \u003cli\u003e1992 Nissan Skyline GTS-T RWD\u003c\/li\u003e\n  \u003cli\u003e1993 Nissan Skyline GTS-T RWD\u003c\/li\u003e\n  \u003cli\u003e1994 Nissan Skyline GTS-T RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185404719164,"sku":"SDNS-0100","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-differential-conversion-bushings-1989-1994-nissan-skyline-gts-t-r32-rwd-sdns-0100-1194396067.jpg?v=1767461230"},{"product_id":"voodoo13-differential-bushings-1989-1994-nissan-skyline-gtr-r32-awd","title":"Voodoo13 Solid Differential Bushings for 1989-1994 Nissan Skyline GTR AWD","description":"\u003cp\u003eEliminate differential deflection on your Nissan Skyline GTR with Voodoo13 solid differential bushings. The soft rubber OEM bushings let the diff rotate under power, stealing thrust; solid billet aluminum holds it dead-still so every Nm lands at the tires.\u003c\/p\u003e\n\u003cp\u003eSolid 6061-T6 billet aluminum construction totally removes rubber compliance for bulletproof diff pinion angle under power. Direct bolt-in, limited lifetime warranty, USA made.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eProvides stability during hard launching and\/or initiating drift\u003c\/li\u003e\n  \u003cli\u003eEliminates play from the soft rubber OEM bushings\u003c\/li\u003e\n  \u003cli\u003eAssists in reducing wheel hop\u003c\/li\u003e\n  \u003cli\u003eGreatly improves power transfer to the pavement\u003c\/li\u003e\n  \u003cli\u003eClass 10.9 hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Differential Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400891\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1989 Nissan Skyline GTR AWD\u003c\/li\u003e\n  \u003cli\u003e1990 Nissan Skyline GTR AWD\u003c\/li\u003e\n  \u003cli\u003e1991 Nissan Skyline GTR AWD\u003c\/li\u003e\n  \u003cli\u003e1992 Nissan Skyline GTR AWD\u003c\/li\u003e\n  \u003cli\u003e1993 Nissan Skyline GTR AWD\u003c\/li\u003e\n  \u003cli\u003e1994 Nissan Skyline GTR AWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185404817468,"sku":"SDNS-0200","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-differential-bushings-1989-1994-nissan-skyline-gtr-r32-awd-sdns-0200-1194425340.jpg?v=1768200278"},{"product_id":"voodoo13-differential-bushings-1995-1998-nissan-skyline-gts-t-r33-rwd","title":"Voodoo13 Solid Differential Bushings for 1995-1998 Nissan Skyline GTS-T RWD","description":"\u003cp\u003eEliminate differential deflection on your Nissan Skyline GTS-T with Voodoo13 solid differential bushings. The soft rubber OEM bushings let the diff rotate under power, stealing thrust; solid billet aluminum holds it dead-still so every Nm lands at the tires.\u003c\/p\u003e\n\u003cp\u003eSolid 6061-T6 billet aluminum construction totally removes rubber compliance for bulletproof diff pinion angle under power. Direct bolt-in, limited lifetime warranty, USA made.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eProvides stability during hard launching and\/or initiating drift\u003c\/li\u003e\n  \u003cli\u003eEliminates play from the soft rubber OEM bushings\u003c\/li\u003e\n  \u003cli\u003eAssists in reducing wheel hop\u003c\/li\u003e\n  \u003cli\u003eGreatly improves power transfer to the pavement\u003c\/li\u003e\n  \u003cli\u003eClass 10.9 hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Differential Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400891\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1995 Nissan Skyline GTS-T RWD\u003c\/li\u003e\n  \u003cli\u003e1996 Nissan Skyline GTS-T RWD\u003c\/li\u003e\n  \u003cli\u003e1997 Nissan Skyline GTS-T RWD\u003c\/li\u003e\n  \u003cli\u003e1998 Nissan Skyline GTS-T RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185404915772,"sku":"SDNS-0200","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-differential-bushings-1995-1998-nissan-skyline-gts-t-r33-rwd-sdns-0200-1194425343.jpg?v=1768200399"},{"product_id":"voodoo13-differential-bushings-1995-1998-nissan-skyline-skyline-gts-4-r33-awd","title":"Voodoo13 Solid Differential Bushings for 1995-1998 Nissan Skyline GTS-4 RWD","description":"\u003cp\u003eEliminate differential deflection on your Nissan Skyline GTS-4 with Voodoo13 solid differential bushings. The soft rubber OEM bushings let the diff rotate under power, stealing thrust; solid billet aluminum holds it dead-still so every Nm lands at the tires.\u003c\/p\u003e\n\u003cp\u003eSolid 6061-T6 billet aluminum construction totally removes rubber compliance for bulletproof diff pinion angle under power. Direct bolt-in, limited lifetime warranty, USA made.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eProvides stability during hard launching and\/or initiating drift\u003c\/li\u003e\n  \u003cli\u003eEliminates play from the soft rubber OEM bushings\u003c\/li\u003e\n  \u003cli\u003eAssists in reducing wheel hop\u003c\/li\u003e\n  \u003cli\u003eGreatly improves power transfer to the pavement\u003c\/li\u003e\n  \u003cli\u003eClass 10.9 hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Differential Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400891\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1995 Nissan Skyline GTS-4 RWD\u003c\/li\u003e\n  \u003cli\u003e1996 Nissan Skyline GTS-4 RWD\u003c\/li\u003e\n  \u003cli\u003e1997 Nissan Skyline GTS-4 RWD\u003c\/li\u003e\n  \u003cli\u003e1998 Nissan Skyline GTS-4 RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185405046844,"sku":"SDNS-0200","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-differential-bushings-1995-1998-nissan-skyline-skyline-gts-4-r33-awd-sdns-0200-1194425344.jpg?v=1769682310"},{"product_id":"voodoo13-differential-bushings-1999-2002-nissan-skyline-gt-t-r34-rwd","title":"Voodoo13 Solid Differential Bushings for 1999-2002 Nissan Skyline GT-T RWD","description":"\u003cp\u003eEliminate differential deflection on your Nissan Skyline GT-T with Voodoo13 solid differential bushings. The soft rubber OEM bushings let the diff rotate under power, stealing thrust; solid billet aluminum holds it dead-still so every Nm lands at the tires.\u003c\/p\u003e\n\u003cp\u003eSolid 6061-T6 billet aluminum construction totally removes rubber compliance for bulletproof diff pinion angle under power. Direct bolt-in, limited lifetime warranty, USA made.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eProvides stability during hard launching and\/or initiating drift\u003c\/li\u003e\n  \u003cli\u003eEliminates play from the soft rubber OEM bushings\u003c\/li\u003e\n  \u003cli\u003eAssists in reducing wheel hop\u003c\/li\u003e\n  \u003cli\u003eGreatly improves power transfer to the pavement\u003c\/li\u003e\n  \u003cli\u003eClass 10.9 hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Differential Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400891\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1999 Nissan Skyline GT-T RWD\u003c\/li\u003e\n  \u003cli\u003e2000 Nissan Skyline GT-T RWD\u003c\/li\u003e\n  \u003cli\u003e2001 Nissan Skyline GT-T RWD\u003c\/li\u003e\n  \u003cli\u003e2002 Nissan Skyline GT-T RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185405112380,"sku":"SDNS-0200","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-differential-bushings-1999-2002-nissan-skyline-gt-t-r34-rwd-sdns-0200-1194425346.jpg?v=1768200431"},{"product_id":"voodoo13-differential-bushings-1999-2002-nissan-skyline-gtr-r34-awd","title":"Voodoo13 Solid Differential Bushings for 1999-2002 Nissan Skyline GTR AWD","description":"\u003cp\u003eEliminate differential deflection on your Nissan Skyline GTR with Voodoo13 solid differential bushings. The soft rubber OEM bushings let the diff rotate under power, stealing thrust; solid billet aluminum holds it dead-still so every Nm lands at the tires.\u003c\/p\u003e\n\u003cp\u003eSolid 6061-T6 billet aluminum construction totally removes rubber compliance for bulletproof diff pinion angle under power. Direct bolt-in, limited lifetime warranty, USA made.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eProvides stability during hard launching and\/or initiating drift\u003c\/li\u003e\n  \u003cli\u003eEliminates play from the soft rubber OEM bushings\u003c\/li\u003e\n  \u003cli\u003eAssists in reducing wheel hop\u003c\/li\u003e\n  \u003cli\u003eGreatly improves power transfer to the pavement\u003c\/li\u003e\n  \u003cli\u003eClass 10.9 hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Differential Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400891\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1999 Nissan Skyline GTR AWD\u003c\/li\u003e\n  \u003cli\u003e2000 Nissan Skyline GTR AWD\u003c\/li\u003e\n  \u003cli\u003e2001 Nissan Skyline GTR AWD\u003c\/li\u003e\n  \u003cli\u003e2002 Nissan Skyline GTR AWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185405210684,"sku":"SDNS-0200","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-differential-bushings-1999-2002-nissan-skyline-gtr-r34-awd-sdns-0200-1194397856.jpg?v=1767503649"},{"product_id":"voodoo13-adjustable-solid-subframe-bushings-1989-1994-nissan-240sx-s13","title":"Voodoo13 Solid Subframe Bushings for 1989-1994 Nissan 240SX RWD","description":"\u003cp\u003eStop rear subframe flex on your Nissan 240SX with Voodoo13 solid billet aluminum subframe bushings. Replacing the compliant rubber factory bushings locks the subframe to the chassis for sharper turn-in, truer rear geometry, and an immediate gain in steering feel.\u003c\/p\u003e\n\u003cp\u003eMachined from 6061-T6 billet aluminum with integrated adjustability (front\/rear) to dial in subframe alignment. Direct-fit, no drilling required, limited lifetime warranty, made in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates the soft OEM rubber bushings\u003c\/li\u003e\n  \u003cli\u003eReduces unwanted wheel hop as well as maintaining set suspension geometry\u003c\/li\u003e\n  \u003cli\u003eSlide-in shims allow quick subframe adjustment without removal to either raise or lower the mounting points\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eHard Clear anodize finish\u003c\/li\u003e\n  \u003cli\u003eGun-drilled to shave weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Subframe Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400846\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1989 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1990 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1991 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1992 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1993 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1994 Nissan 240SX RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185405341756,"sku":"SBNS-0100HC","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-solid-subframe-bushings-1989-1994-nissan-240sx-s13-sbns-0100hc-1194446991.jpg?v=1769819292"},{"product_id":"voodoo13-adjustable-solid-subframe-bushings-1995-1998-nissan-240sx-s14","title":"Voodoo13 Solid Subframe Bushings for 1995-1998 Nissan 240SX RWD","description":"\u003cp\u003eStop rear subframe flex on your Nissan 240SX with Voodoo13 solid billet aluminum subframe bushings. Replacing the compliant rubber factory bushings locks the subframe to the chassis for sharper turn-in, truer rear geometry, and an immediate gain in steering feel.\u003c\/p\u003e\n\u003cp\u003eMachined from 6061-T6 billet aluminum with integrated adjustability (front\/rear) to dial in subframe alignment. Direct-fit, no drilling required, limited lifetime warranty, made in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates the soft OEM rubber bushings\u003c\/li\u003e\n  \u003cli\u003eReduces unwanted wheel hop as well as maintaining set suspension geometry\u003c\/li\u003e\n  \u003cli\u003eSlide-in shims allow quick subframe adjustment without removal to either raise or lower the mounting points\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eHard Clear anodize finish\u003c\/li\u003e\n  \u003cli\u003eGun-drilled to shave weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Subframe Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400846\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1995 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1996 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1997 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1998 Nissan 240SX RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185405472828,"sku":"SBNS-0100HC","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-solid-subframe-bushings-1995-1998-nissan-240sx-s14-sbns-0100hc-1194399469.jpg?v=1767744218"},{"product_id":"voodoo13-adjustable-solid-subframe-bushings-1999-2002-nissan-240sx-s15","title":"Voodoo13 Solid Subframe Bushings for 1999-2002 Nissan 240SX S15 RWD","description":"\u003cp\u003eStop rear subframe flex on your Nissan 240SX S15 with Voodoo13 solid billet aluminum subframe bushings. Replacing the compliant rubber factory bushings locks the subframe to the chassis for sharper turn-in, truer rear geometry, and an immediate gain in steering feel.\u003c\/p\u003e\n\u003cp\u003eMachined from 6061-T6 billet aluminum with integrated adjustability (front\/rear) to dial in subframe alignment. Direct-fit, no drilling required, limited lifetime warranty, made in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCNC-machined 6061-T6 billet aluminum construction\u003c\/li\u003e\n  \u003cli\u003eSealed QA1 motorsport-grade rod ends\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 zinc-plated hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Subframe Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1999 Nissan 240SX S15 RWD\u003c\/li\u003e\n  \u003cli\u003e2000 Nissan 240SX S15 RWD\u003c\/li\u003e\n  \u003cli\u003e2001 Nissan 240SX S15 RWD\u003c\/li\u003e\n  \u003cli\u003e2002 Nissan 240SX S15 RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185405636668,"sku":"SBNS-0100HC","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-solid-subframe-bushings-1999-2002-nissan-240sx-s15-sbns-0100hc-1194432635.jpg?v=1768260252"},{"product_id":"voodoo13-adjustable-solid-subframe-bushings-1989-1994-nissan-skyline-skyline-r32","title":"Voodoo13 Solid Subframe Bushings for 1989-1994 Nissan Skyline RWD","description":"\u003cp\u003eStop rear subframe flex on your Nissan Skyline with Voodoo13 solid billet aluminum subframe bushings. Replacing the compliant rubber factory bushings locks the subframe to the chassis for sharper turn-in, truer rear geometry, and an immediate gain in steering feel.\u003c\/p\u003e\n\u003cp\u003eMachined from 6061-T6 billet aluminum with integrated adjustability (front\/rear) to dial in subframe alignment. Direct-fit, no drilling required, limited lifetime warranty, made in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates the soft OEM rubber bushings\u003c\/li\u003e\n  \u003cli\u003eReduces unwanted wheel hop as well as maintaining set suspension geometry\u003c\/li\u003e\n  \u003cli\u003eSlide-in shims allow quick subframe adjustment without removal to either raise or lower the mounting points\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eHard Clear anodize finish\u003c\/li\u003e\n  \u003cli\u003eGun-drilled to shave weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Subframe Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400846\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1989 Nissan Skyline RWD\u003c\/li\u003e\n  \u003cli\u003e1990 Nissan Skyline RWD\u003c\/li\u003e\n  \u003cli\u003e1991 Nissan Skyline RWD\u003c\/li\u003e\n  \u003cli\u003e1992 Nissan Skyline RWD\u003c\/li\u003e\n  \u003cli\u003e1993 Nissan Skyline RWD\u003c\/li\u003e\n  \u003cli\u003e1994 Nissan Skyline RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185405734972,"sku":"SBNS-0100HC","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-solid-subframe-bushings-1989-1994-nissan-skyline-skyline-r32-sbns-0100hc-1194432637.jpg?v=1768260278"},{"product_id":"voodoo13-adjustable-solid-subframe-bushings-1995-1998-nissan-skyline-r33","title":"Voodoo13 Solid Subframe Bushings for 1995-1998 Nissan Skyline RWD","description":"\u003cp\u003eStop rear subframe flex on your Nissan Skyline with Voodoo13 solid billet aluminum subframe bushings. Replacing the compliant rubber factory bushings locks the subframe to the chassis for sharper turn-in, truer rear geometry, and an immediate gain in steering feel.\u003c\/p\u003e\n\u003cp\u003eMachined from 6061-T6 billet aluminum with integrated adjustability (front\/rear) to dial in subframe alignment. Direct-fit, no drilling required, limited lifetime warranty, made in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates the soft OEM rubber bushings\u003c\/li\u003e\n  \u003cli\u003eReduces unwanted wheel hop as well as maintaining set suspension geometry\u003c\/li\u003e\n  \u003cli\u003eSlide-in shims allow quick subframe adjustment without removal to either raise or lower the mounting points\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eHard Clear anodize finish\u003c\/li\u003e\n  \u003cli\u003eGun-drilled to shave weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Subframe Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400846\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1995 Nissan Skyline RWD\u003c\/li\u003e\n  \u003cli\u003e1996 Nissan Skyline RWD\u003c\/li\u003e\n  \u003cli\u003e1997 Nissan Skyline RWD\u003c\/li\u003e\n  \u003cli\u003e1998 Nissan Skyline RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185405833276,"sku":"SBNS-0100HC","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-solid-subframe-bushings-1995-1998-nissan-skyline-r33-sbns-0100hc-1194432636.jpg?v=1769699891"},{"product_id":"voodoo13-adjustable-solid-subframe-bushings-1999-2002-nissan-skyline-r34","title":"Voodoo13 Solid Subframe Bushings for 1999-2002 Nissan Skyline RWD","description":"\u003cp\u003eStop rear subframe flex on your Nissan Skyline with Voodoo13 solid billet aluminum subframe bushings. Replacing the compliant rubber factory bushings locks the subframe to the chassis for sharper turn-in, truer rear geometry, and an immediate gain in steering feel.\u003c\/p\u003e\n\u003cp\u003eMachined from 6061-T6 billet aluminum with integrated adjustability (front\/rear) to dial in subframe alignment. Direct-fit, no drilling required, limited lifetime warranty, made in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates the soft OEM rubber bushings\u003c\/li\u003e\n  \u003cli\u003eReduces unwanted wheel hop as well as maintaining set suspension geometry\u003c\/li\u003e\n  \u003cli\u003eSlide-in shims allow quick subframe adjustment without removal to either raise or lower the mounting points\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eHard Clear anodize finish\u003c\/li\u003e\n  \u003cli\u003eGun-drilled to shave weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Subframe Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400846\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1999 Nissan Skyline RWD\u003c\/li\u003e\n  \u003cli\u003e2000 Nissan Skyline RWD\u003c\/li\u003e\n  \u003cli\u003e2001 Nissan Skyline RWD\u003c\/li\u003e\n  \u003cli\u003e2002 Nissan Skyline RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185405964348,"sku":"SBNS-0100HC","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-solid-subframe-bushings-1999-2002-nissan-skyline-r34-sbns-0100hc-1194395718.jpg?v=1767452438"},{"product_id":"voodoo13-solid-subframe-bushings-2009-nissan-370z","title":"Voodoo13 Solid Subframe Bushings for 2009-2019 Nissan 370Z RWD","description":"\u003cp\u003eStop rear subframe flex on your Nissan 370Z with Voodoo13 solid billet aluminum subframe bushings. Replacing the compliant rubber factory bushings locks the subframe to the chassis for sharper turn-in, truer rear geometry, and an immediate gain in steering feel.\u003c\/p\u003e\n\u003cp\u003eMachined from 6061-T6 billet aluminum with integrated adjustability (front\/rear) to dial in subframe alignment. Direct-fit, no drilling required, limited lifetime warranty, made in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates the soft OEM rubber bushings\u003c\/li\u003e\n  \u003cli\u003eReduces unwanted wheel hop as well as maintaining set suspension geometry\u003c\/li\u003e\n  \u003cli\u003eSlide-in shims allow quick subframe adjustment without removal to either raise or lower the mounting points\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eHard Clear anodize finish\u003c\/li\u003e\n  \u003cli\u003eGun-drilled to shave weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Subframe Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400860\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2009 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2010 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2011 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2012 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2013 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2014 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2015 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2016 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2017 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2018 Nissan 370Z RWD\u003c\/li\u003e\n  \u003cli\u003e2019 Nissan 370Z RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185406029884,"sku":"SBNS-0400","price":211.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-solid-subframe-bushings-2009-2020-nissan-370z-z34-sbns-0400-1194426360.jpg?v=1768223559"},{"product_id":"voodoo13-solid-subframe-bushings-2008-2013-infiniti-g37","title":"Voodoo13 Solid Subframe Bushings for 2008-2013 Infiniti G37 RWD","description":"\u003cp\u003eStop rear subframe flex on your Infiniti G37 with Voodoo13 solid billet aluminum subframe bushings. Replacing the compliant rubber factory bushings locks the subframe to the chassis for sharper turn-in, truer rear geometry, and an immediate gain in steering feel.\u003c\/p\u003e\n\u003cp\u003eMachined from 6061-T6 billet aluminum with integrated adjustability (front\/rear) to dial in subframe alignment. Direct-fit, no drilling required, limited lifetime warranty, made in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCNC-machined 6061-T6 billet aluminum construction\u003c\/li\u003e\n  \u003cli\u003eSealed QA1 motorsport-grade rod ends\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 zinc-plated hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Subframe Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2008 Infiniti G37 RWD\u003c\/li\u003e\n  \u003cli\u003e2009 Infiniti G37 RWD\u003c\/li\u003e\n  \u003cli\u003e2010 Infiniti G37 RWD\u003c\/li\u003e\n  \u003cli\u003e2011 Infiniti G37 RWD\u003c\/li\u003e\n  \u003cli\u003e2012 Infiniti G37 RWD\u003c\/li\u003e\n  \u003cli\u003e2013 Infiniti G37 RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185406128188,"sku":"SBNS-0400","price":211.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-solid-subframe-bushings-2008-2013-infiniti-g37-sbns-0400-1194426361.jpg?v=1768223531"},{"product_id":"voodoo13-adjustable-solid-subframe-bushings-2013-2016-scion-fr-s","title":"Voodoo13 Solid Subframe Bushings for 2013-2016 Scion FR-S RWD","description":"\u003cp\u003eStop rear subframe flex on your Scion FR-S with Voodoo13 solid billet aluminum subframe bushings. Replacing the compliant rubber factory bushings locks the subframe to the chassis for sharper turn-in, truer rear geometry, and an immediate gain in steering feel.\u003c\/p\u003e\n\u003cp\u003eMachined from 6061-T6 billet aluminum with integrated adjustability (front\/rear) to dial in subframe alignment. Direct-fit, no drilling required, limited lifetime warranty, made in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates the soft OEM rubber bushings\u003c\/li\u003e\n  \u003cli\u003eReduces unwanted wheel hop as well as maintaining set suspension geometry\u003c\/li\u003e\n  \u003cli\u003eSlide-in shims allow quick subframe adjustment without removal to either raise or lower the mounting points\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eHard Clear anodize finish\u003c\/li\u003e\n  \u003cli\u003eGun-drilled to shave weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Subframe Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400877\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2013 Scion FR-S RWD\u003c\/li\u003e\n  \u003cli\u003e2014 Scion FR-S RWD\u003c\/li\u003e\n  \u003cli\u003e2015 Scion FR-S RWD\u003c\/li\u003e\n  \u003cli\u003e2016 Scion FR-S RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185406259260,"sku":"SBSC-0100","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-solid-subframe-bushings-2013-2016-scion-fr-s-sbsc-0100-1194432634.jpg?v=1768263338"},{"product_id":"voodoo13-adjustable-solid-subframe-bushings-2013-2020-subaru-brz-zc6","title":"Voodoo13 Solid Subframe Bushings for 2013-2019 Subaru BRZ RWD","description":"\u003cp\u003eStop rear subframe flex on your Subaru BRZ with Voodoo13 solid billet aluminum subframe bushings. Replacing the compliant rubber factory bushings locks the subframe to the chassis for sharper turn-in, truer rear geometry, and an immediate gain in steering feel.\u003c\/p\u003e\n\u003cp\u003eMachined from 6061-T6 billet aluminum with integrated adjustability (front\/rear) to dial in subframe alignment. Direct-fit, no drilling required, limited lifetime warranty, made in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates the soft OEM rubber bushings\u003c\/li\u003e\n  \u003cli\u003eReduces unwanted wheel hop as well as maintaining set suspension geometry\u003c\/li\u003e\n  \u003cli\u003eSlide-in shims allow quick subframe adjustment without removal to either raise or lower the mounting points\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eHard Clear anodize finish\u003c\/li\u003e\n  \u003cli\u003eGun-drilled to shave weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Subframe Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400877\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2013 Subaru BRZ RWD\u003c\/li\u003e\n  \u003cli\u003e2014 Subaru BRZ RWD\u003c\/li\u003e\n  \u003cli\u003e2015 Subaru BRZ RWD\u003c\/li\u003e\n  \u003cli\u003e2016 Subaru BRZ RWD\u003c\/li\u003e\n  \u003cli\u003e2017 Subaru BRZ RWD\u003c\/li\u003e\n  \u003cli\u003e2018 Subaru BRZ RWD\u003c\/li\u003e\n  \u003cli\u003e2019 Subaru BRZ RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185406357564,"sku":"SBSC-0100","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-solid-subframe-bushings-2013-2020-subaru-brz-zc6-sbsc-0100-1194395457.jpg?v=1767445870"},{"product_id":"voodoo13-adjustable-solid-subframe-bushings-2017-toyota-86","title":"Voodoo13 Solid Subframe Bushings for 2017-2019 Toyota 86 RWD","description":"\u003cp\u003eStop rear subframe flex on your Toyota 86 with Voodoo13 solid billet aluminum subframe bushings. Replacing the compliant rubber factory bushings locks the subframe to the chassis for sharper turn-in, truer rear geometry, and an immediate gain in steering feel.\u003c\/p\u003e\n\u003cp\u003eMachined from 6061-T6 billet aluminum with integrated adjustability (front\/rear) to dial in subframe alignment. Direct-fit, no drilling required, limited lifetime warranty, made in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates the soft OEM rubber bushings\u003c\/li\u003e\n  \u003cli\u003eReduces unwanted wheel hop as well as maintaining set suspension geometry\u003c\/li\u003e\n  \u003cli\u003eSlide-in shims allow quick subframe adjustment without removal to either raise or lower the mounting points\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eHard Clear anodize finish\u003c\/li\u003e\n  \u003cli\u003eGun-drilled to shave weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Subframe Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400877\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2017 Toyota 86 RWD\u003c\/li\u003e\n  \u003cli\u003e2018 Toyota 86 RWD\u003c\/li\u003e\n  \u003cli\u003e2019 Toyota 86 RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185406423100,"sku":"SBSC-0100","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-solid-subframe-bushings-2017-2020-toyota-86-zn6-sbsc-0100-1194427135.jpg?v=1768241231"},{"product_id":"voodoo13-adjustable-solid-subframe-conversion-bushings-1989-1994-nissan-240sx-s13","title":"Voodoo13 Solid Subframe Conversion Bushings for 1989-1994 Nissan 240SX RWD","description":"\u003cp\u003eStop rear subframe flex on your Nissan 240SX with Voodoo13 solid billet aluminum subframe bushings. Replacing the compliant rubber factory bushings locks the subframe to the chassis for sharper turn-in, truer rear geometry, and an immediate gain in steering feel.\u003c\/p\u003e\n\u003cp\u003eMachined from 6061-T6 billet aluminum with integrated adjustability (front\/rear) to dial in subframe alignment. Direct-fit, no drilling required, limited lifetime warranty, made in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates the soft OEM rubber bushings\u003c\/li\u003e\n  \u003cli\u003eReduces unwanted wheel hop as well as maintaining set suspension geometry\u003c\/li\u003e\n  \u003cli\u003eSlide-in shims allow quick subframe adjustment without removal to either raise or lower the mounting points\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high quality USA-sourced T6061-T6 aerospace-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eHard Clear anodize finish\u003c\/li\u003e\n  \u003cli\u003eGun-drilled to shave weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time is approximately 1 hour. A full vehicle-specific installation guide is available on request — contact us with your order number for torque specs and alignment recommendations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eVoodoo13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eSolid Subframe Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRod Ends\u003c\/td\u003e\n\u003ctd\u003eQA1 Motorsport-Grade Sealed Rod Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9 Zinc-Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e840059400853\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned and Manufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eConversion bushings to allow S14 or S15 subframe into S13\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1989 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1990 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1991 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1992 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1993 Nissan 240SX RWD\u003c\/li\u003e\n  \u003cli\u003e1994 Nissan 240SX RWD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voodoo13","offers":[{"title":"Default Title","offer_id":40185407569980,"sku":"SBNS-0101HC","price":257.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/voodoo13-adjustable-solid-subframe-conversion-bushings-1989-1994-nissan-240sx-s13-sbns-0101hc-1194399275.jpg?v=1769094219"},{"product_id":"st-suspensions-st-front-anti-sway-bar-1966-1976-bmw-2002-2-0-4cyl","title":"ST Suspensions ST Front Anti-Sway Bar for 1966-1976 BMW 2002 2.0L 4cyl","description":"\u003cp\u003eLooking to improve the handling of your vehicle? Our ST Anti-Sway Bars for the 1966-1976 BMW 2002 2.0L 4cyl are the ideal solution. By upgrading the Anti-Sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-Sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-Sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-Sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip.\u003c\/p\u003e\u003cp\u003eOur high performance ST Anti-Sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.\u003c\/p\u003e\u003ch3\u003eFantastic handling\u003c\/h3\u003e\u003cp\u003eOnce fitted, ST Anti-Sway Bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behavior is a lot more direct allowing a sportier and more agile driving style.\u003c\/p\u003e\u003ch3\u003eBetter Performance\u003c\/h3\u003e\u003cp\u003eST suspension Anti-Sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles.\u003c\/p\u003e\u003ch3\u003eStandard Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.\u003c\/li\u003e\n\u003cli\u003eGreatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.\u003c\/li\u003e\n\u003cli\u003eMore direct steering behavior.\u003c\/li\u003e\n\u003cli\u003eIncreased traction.\u003c\/li\u003e\n\u003cli\u003eImprove balance by dialing out under or oversteer.\u003c\/li\u003e\n\u003cli\u003eMultiple adjustments when possible.\u003c\/li\u003e\n\u003cli\u003eHigh quality composite bushings reduce deflection and improve load transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eSway Bars \u0026amp; End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e00611512500003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1966-1976 BMW 2002 2.0L 4cyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar Diameter - Front\u003c\/td\u003e\n\u003ctd\u003e7\/8 in. \/ 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1966 BMW 2002 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e1967 BMW 2002 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e1968 BMW 2002 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e1969 BMW 2002 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e1970 BMW 2002 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e1971 BMW 2002 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e1972 BMW 2002 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e1973 BMW 2002 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e1974 BMW 2002 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e1975 BMW 2002 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e1976 BMW 2002 2.0L 4cyl\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":40185525764156,"sku":"50000","price":359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/st-suspensions-st-front-anti-sway-bar-for-1966-1976-bmw-2002-2-0l-4cyl-50000-1194428273.jpg?v=1768101581"},{"product_id":"st-suspensions-st-front-anti-sway-bar-1995-1999-dodge-neon-2-0-4cyl","title":"ST Suspensions ST Front Anti-Sway Bar for 1995-1999 Dodge Neon 2.0L 4cyl","description":"\u003cp\u003eLooking to improve the handling of your vehicle? Our ST Anti-Sway Bars for the 1995-1999 Dodge Neon 2.0L 4cyl are the ideal solution. By upgrading the Anti-Sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-Sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-Sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-Sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip.\u003c\/p\u003e\u003cp\u003eOur high performance ST Anti-Sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.\u003c\/p\u003e\u003ch3\u003eFantastic handling\u003c\/h3\u003e\u003cp\u003eOnce fitted, ST Anti-Sway Bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behavior is a lot more direct allowing a sportier and more agile driving style.\u003c\/p\u003e\u003ch3\u003eBetter Performance\u003c\/h3\u003e\u003cp\u003eST suspension Anti-Sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles.\u003c\/p\u003e\u003ch3\u003eStandard Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.\u003c\/li\u003e\n\u003cli\u003eGreatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.\u003c\/li\u003e\n\u003cli\u003eMore direct steering behavior.\u003c\/li\u003e\n\u003cli\u003eIncreased traction.\u003c\/li\u003e\n\u003cli\u003eImprove balance by dialing out under or oversteer.\u003c\/li\u003e\n\u003cli\u003eMultiple adjustments when possible.\u003c\/li\u003e\n\u003cli\u003eHigh quality composite bushings reduce deflection and improve load transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e50002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eSway Bars \u0026amp; End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e00611512500027\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1995-1999 Dodge Neon 2.0L 4cyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar Diameter - Front\u003c\/td\u003e\n\u003ctd\u003e15\/16 in. \/ 24mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1995 Dodge Neon 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e1996 Dodge Neon 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e1997 Dodge Neon 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e1998 Dodge Neon 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e1999 Dodge Neon 2.0L 4cyl\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":40185525829692,"sku":"50002","price":359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/st-suspensions-st-front-anti-sway-bar-for-1995-1999-dodge-neon-2-0l-4cyl-50002-1194428108.jpg?v=1768097292"},{"product_id":"st-suspensions-st-front-anti-sway-bar-1977-1983-bmw-3-series-320i-e21","title":"ST Suspensions ST Front Anti-Sway Bar for 1977-1983 BMW 3 Series 320i (E21)","description":"\u003cp\u003eLooking to improve the handling of your vehicle? Our ST Anti-Sway Bars for the 1977-1983 BMW 3 Series 320i (E21) are the ideal solution. By upgrading the Anti-Sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-Sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-Sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-Sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip.\u003c\/p\u003e\u003cp\u003eOur high performance ST Anti-Sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.\u003c\/p\u003e\u003ch3\u003eFantastic handling\u003c\/h3\u003e\u003cp\u003eOnce fitted, ST Anti-Sway Bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behavior is a lot more direct allowing a sportier and more agile driving style.\u003c\/p\u003e\u003ch3\u003eBetter Performance\u003c\/h3\u003e\u003cp\u003eST suspension Anti-Sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles.\u003c\/p\u003e\u003ch3\u003eStandard Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.\u003c\/li\u003e\n\u003cli\u003eGreatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.\u003c\/li\u003e\n\u003cli\u003eMore direct steering behavior.\u003c\/li\u003e\n\u003cli\u003eIncreased traction.\u003c\/li\u003e\n\u003cli\u003eImprove balance by dialing out under or oversteer.\u003c\/li\u003e\n\u003cli\u003eMultiple adjustments when possible.\u003c\/li\u003e\n\u003cli\u003eHigh quality composite bushings reduce deflection and improve load transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e50005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eSway Bars \u0026amp; End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e00611512500058\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1977-1983 BMW 3 Series 320i\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eE21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar Diameter - Front\u003c\/td\u003e\n\u003ctd\u003e1 in. \/ 25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1977 BMW 3 Series 320i (E21)\u003c\/li\u003e\n\u003cli\u003e1978 BMW 3 Series 320i (E21)\u003c\/li\u003e\n\u003cli\u003e1979 BMW 3 Series 320i (E21)\u003c\/li\u003e\n\u003cli\u003e1980 BMW 3 Series 320i (E21)\u003c\/li\u003e\n\u003cli\u003e1981 BMW 3 Series 320i (E21)\u003c\/li\u003e\n\u003cli\u003e1982 BMW 3 Series 320i (E21)\u003c\/li\u003e\n\u003cli\u003e1983 BMW 3 Series 320i (E21)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":40185525927996,"sku":"50005","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/st-suspensions-st-front-anti-sway-bar-for-1977-1983-bmw-3-series-320i-e21-50005-1194428267.jpg?v=1768101399"},{"product_id":"st-suspensions-st-front-anti-sway-bar-1996-1998-eagle-talon-2nd-gen-awd-2wd-2-0-4cyl","title":"ST Suspensions ST Front Anti-Sway Bar for 1996-1998 Eagle Talon AWD\/FWD 2.0L 4cyl","description":"\u003cp\u003eLooking to improve the handling of your vehicle? Our ST Anti-Sway Bars for the 1996-1998 Eagle Talon AWD\/FWD 2.0L 4cyl are the ideal solution. By upgrading the Anti-Sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-Sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-Sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-Sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip.\u003c\/p\u003e\u003cp\u003eOur high performance ST Anti-Sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.\u003c\/p\u003e\u003ch3\u003eFantastic handling\u003c\/h3\u003e\u003cp\u003eOnce fitted, ST Anti-Sway Bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behavior is a lot more direct allowing a sportier and more agile driving style.\u003c\/p\u003e\u003ch3\u003eBetter Performance\u003c\/h3\u003e\u003cp\u003eST suspension Anti-Sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles.\u003c\/p\u003e\u003ch3\u003eStandard Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.\u003c\/li\u003e\n\u003cli\u003eGreatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.\u003c\/li\u003e\n\u003cli\u003eMore direct steering behavior.\u003c\/li\u003e\n\u003cli\u003eIncreased traction.\u003c\/li\u003e\n\u003cli\u003eImprove balance by dialing out under or oversteer.\u003c\/li\u003e\n\u003cli\u003eMultiple adjustments when possible.\u003c\/li\u003e\n\u003cli\u003eHigh quality composite bushings reduce deflection and improve load transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e50205\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eSway Bars \u0026amp; End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e00611512502052\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1996-1998 Eagle Talon 2.0L 4cyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eAWD\/FWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar Diameter - Front\u003c\/td\u003e\n\u003ctd\u003e3\/4 in. \/ 19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eOnly for Vehicles Originally Equipped with Rear Anti Sway Bar.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1996 Eagle Talon AWD\/FWD 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e1997 Eagle Talon AWD\/FWD 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e1998 Eagle Talon AWD\/FWD 2.0L 4cyl\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":40185525993532,"sku":"50205","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/st-suspensions-st-front-anti-sway-bar-for-1996-1998-eagle-talon-awd-fwd-2-0l-4cyl-50205-1194428107.jpg?v=1768097230"},{"product_id":"st-suspensions-st-front-anti-sway-bar-1995-1999-mitsubishi-eclipse-incl-spyder-2wd-2-0-2-4-4cyl-awd-2-0-4cyl","title":"ST Suspensions ST Front Anti-Sway Bar for 1995-1999 Mitsubishi Eclipse (FWD) 2.0-2.4L (AWD) 2.0L","description":"\u003cp\u003eLooking to improve the handling of your vehicle? Our ST Anti-Sway Bars for the 1995-1999 Mitsubishi Eclipse (FWD) 2.0-2.4L (AWD) 2.0L are the ideal solution. By upgrading the Anti-Sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-Sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-Sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-Sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip.\u003c\/p\u003e\u003cp\u003eOur high performance ST Anti-Sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.\u003c\/p\u003e\u003ch3\u003eFantastic handling\u003c\/h3\u003e\u003cp\u003eOnce fitted, ST Anti-Sway Bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behavior is a lot more direct allowing a sportier and more agile driving style.\u003c\/p\u003e\u003ch3\u003eBetter Performance\u003c\/h3\u003e\u003cp\u003eST suspension Anti-Sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles.\u003c\/p\u003e\u003ch3\u003eStandard Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.\u003c\/li\u003e\n\u003cli\u003eGreatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.\u003c\/li\u003e\n\u003cli\u003eMore direct steering behavior.\u003c\/li\u003e\n\u003cli\u003eIncreased traction.\u003c\/li\u003e\n\u003cli\u003eImprove balance by dialing out under or oversteer.\u003c\/li\u003e\n\u003cli\u003eMultiple adjustments when possible.\u003c\/li\u003e\n\u003cli\u003eHigh quality composite bushings reduce deflection and improve load transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e50205\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eSway Bars \u0026amp; End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e00611512502052\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1995-1999 Mitsubishi Eclipse 2.0-2.4L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eAWD\/FWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar Diameter - Front\u003c\/td\u003e\n\u003ctd\u003e3\/4 in. \/ 19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eOnly for Vehicles Originally Equipped with Rear Anti Sway Bar.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1995 Mitsubishi Eclipse (FWD) 2.0-2.4L (AWD) 2.0L\u003c\/li\u003e\n\u003cli\u003e1996 Mitsubishi Eclipse (FWD) 2.0-2.4L (AWD) 2.0L\u003c\/li\u003e\n\u003cli\u003e1997 Mitsubishi Eclipse (FWD) 2.0-2.4L (AWD) 2.0L\u003c\/li\u003e\n\u003cli\u003e1998 Mitsubishi Eclipse (FWD) 2.0-2.4L (AWD) 2.0L\u003c\/li\u003e\n\u003cli\u003e1999 Mitsubishi Eclipse (FWD) 2.0-2.4L (AWD) 2.0L\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":40185526059068,"sku":"50205","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/st-suspensions-st-front-anti-sway-bar-for-1995-1999-mitsubishi-eclipse-fwd-2-0-2-4l-awd-2-0l-50205-1194428106.jpg?v=1769631371"},{"product_id":"st-suspensions-st-front-anti-sway-bar-2006-2012-mitsubishi-eclipse-2-4-4cyl-3-8-v6","title":"ST Suspensions ST Front Anti-Sway Bar for 2006-2012 Mitsubishi Eclipse 2.4L (4cyl) 3.8L (V6)","description":"\u003cp\u003eLooking to improve the handling of your vehicle? Our ST Anti-Sway Bars for the 2006-2012 Mitsubishi Eclipse 2.4L (4cyl) 3.8L (V6) are the ideal solution. By upgrading the Anti-Sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-Sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-Sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-Sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip.\u003c\/p\u003e\u003cp\u003eOur high performance ST Anti-Sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.\u003c\/p\u003e\u003ch3\u003eFantastic handling\u003c\/h3\u003e\u003cp\u003eOnce fitted, ST Anti-Sway Bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behavior is a lot more direct allowing a sportier and more agile driving style.\u003c\/p\u003e\u003ch3\u003eBetter Performance\u003c\/h3\u003e\u003cp\u003eST suspension Anti-Sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles.\u003c\/p\u003e\u003ch3\u003eStandard Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.\u003c\/li\u003e\n\u003cli\u003eGreatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.\u003c\/li\u003e\n\u003cli\u003eMore direct steering behavior.\u003c\/li\u003e\n\u003cli\u003eIncreased traction.\u003c\/li\u003e\n\u003cli\u003eImprove balance by dialing out under or oversteer.\u003c\/li\u003e\n\u003cli\u003eMultiple adjustments when possible.\u003c\/li\u003e\n\u003cli\u003eHigh quality composite bushings reduce deflection and improve load transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e50208\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eSway Bars \u0026amp; End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e00611512502083\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2006-2012 Mitsubishi Eclipse 2.4L (4cyl) 3.8L (V6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar Diameter - Front\u003c\/td\u003e\n\u003ctd\u003e1 in. \/ 25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2006 Mitsubishi Eclipse 2.4L (4cyl) 3.8L (V6)\u003c\/li\u003e\n\u003cli\u003e2007 Mitsubishi Eclipse 2.4L (4cyl) 3.8L (V6)\u003c\/li\u003e\n\u003cli\u003e2008 Mitsubishi Eclipse 2.4L (4cyl) 3.8L (V6)\u003c\/li\u003e\n\u003cli\u003e2009 Mitsubishi Eclipse 2.4L (4cyl) 3.8L (V6)\u003c\/li\u003e\n\u003cli\u003e2010 Mitsubishi Eclipse 2.4L (4cyl) 3.8L (V6)\u003c\/li\u003e\n\u003cli\u003e2011 Mitsubishi Eclipse 2.4L (4cyl) 3.8L (V6)\u003c\/li\u003e\n\u003cli\u003e2012 Mitsubishi Eclipse 2.4L (4cyl) 3.8L (V6)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":40185526157372,"sku":"50208","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/st-suspensions-st-front-anti-sway-bar-for-2006-2012-mitsubishi-eclipse-2-4l-4cyl-3-8l-v6-50208-1194432424.jpg?v=1768424291"},{"product_id":"st-suspensions-st-front-anti-sway-bar-1994-1999-toyota-celica-2wd-1-8-2-2-4cyl","title":"ST Suspensions ST Front Anti-Sway Bar for 1994-1999 Toyota Celica 1.8-2.2L 4cyl","description":"\u003cp\u003eLooking to improve the handling of your vehicle? Our ST Anti-Sway Bars for the 1994-1999 Toyota Celica 1.8-2.2L 4cyl are the ideal solution. By upgrading the Anti-Sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-Sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-Sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-Sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip.\u003c\/p\u003e\u003cp\u003eOur high performance ST Anti-Sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.\u003c\/p\u003e\u003ch3\u003eFantastic handling\u003c\/h3\u003e\u003cp\u003eOnce fitted, ST Anti-Sway Bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behavior is a lot more direct allowing a sportier and more agile driving style.\u003c\/p\u003e\u003ch3\u003eBetter Performance\u003c\/h3\u003e\u003cp\u003eST suspension Anti-Sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles.\u003c\/p\u003e\u003ch3\u003eStandard Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.\u003c\/li\u003e\n\u003cli\u003eGreatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.\u003c\/li\u003e\n\u003cli\u003eMore direct steering behavior.\u003c\/li\u003e\n\u003cli\u003eIncreased traction.\u003c\/li\u003e\n\u003cli\u003eImprove balance by dialing out under or oversteer.\u003c\/li\u003e\n\u003cli\u003eMultiple adjustments when possible.\u003c\/li\u003e\n\u003cli\u003eHigh quality composite bushings reduce deflection and improve load transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e50210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eSway Bars \u0026amp; End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e00611512502106\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1994-1999 Toyota Celica 1.8-2.2L 4cyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar Diameter - Front\u003c\/td\u003e\n\u003ctd\u003e15\/16 in. \/ 24mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1994 Toyota Celica 1.8-2.2L 4cyl\u003c\/li\u003e\n\u003cli\u003e1995 Toyota Celica 1.8-2.2L 4cyl\u003c\/li\u003e\n\u003cli\u003e1996 Toyota Celica 1.8-2.2L 4cyl\u003c\/li\u003e\n\u003cli\u003e1997 Toyota Celica 1.8-2.2L 4cyl\u003c\/li\u003e\n\u003cli\u003e1998 Toyota Celica 1.8-2.2L 4cyl\u003c\/li\u003e\n\u003cli\u003e1999 Toyota Celica 1.8-2.2L 4cyl\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":40185526255676,"sku":"50210","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/st-suspensions-st-front-anti-sway-bar-for-1994-1999-toyota-celica-1-8-2-2l-4cyl-50210-1194428114.jpg?v=1768097499"},{"product_id":"st-suspensions-st-front-anti-sway-bar-1986-1992-toyota-supra-incl-turbo-3-0-6cyl","title":"ST Suspensions ST Front Anti-Sway Bar for 1986-1992 Toyota Supra Turbo 3.0L 6cyl","description":"\u003cp\u003eLooking to improve the handling of your vehicle? Our ST Anti-Sway Bars for the 1986-1992 Toyota Supra Turbo 3.0L 6cyl are the ideal solution. By upgrading the Anti-Sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-Sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-Sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-Sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip.\u003c\/p\u003e\u003cp\u003eOur high performance ST Anti-Sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.\u003c\/p\u003e\u003ch3\u003eFantastic handling\u003c\/h3\u003e\u003cp\u003eOnce fitted, ST Anti-Sway Bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behavior is a lot more direct allowing a sportier and more agile driving style.\u003c\/p\u003e\u003ch3\u003eBetter Performance\u003c\/h3\u003e\u003cp\u003eST suspension Anti-Sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles.\u003c\/p\u003e\u003ch3\u003eStandard Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.\u003c\/li\u003e\n\u003cli\u003eGreatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.\u003c\/li\u003e\n\u003cli\u003eMore direct steering behavior.\u003c\/li\u003e\n\u003cli\u003eIncreased traction.\u003c\/li\u003e\n\u003cli\u003eImprove balance by dialing out under or oversteer.\u003c\/li\u003e\n\u003cli\u003eMultiple adjustments when possible.\u003c\/li\u003e\n\u003cli\u003eHigh quality composite bushings reduce deflection and improve load transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e50215\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eSway Bars \u0026amp; End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e00611512502151\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1986-1992 Toyota Supra Turbo 3.0L 6cyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar Diameter - Front\u003c\/td\u003e\n\u003ctd\u003e1 1\/8 in. \/ 28mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1986 Toyota Supra Turbo 3.0L 6cyl\u003c\/li\u003e\n\u003cli\u003e1987 Toyota Supra Turbo 3.0L 6cyl\u003c\/li\u003e\n\u003cli\u003e1988 Toyota Supra Turbo 3.0L 6cyl\u003c\/li\u003e\n\u003cli\u003e1989 Toyota Supra Turbo 3.0L 6cyl\u003c\/li\u003e\n\u003cli\u003e1990 Toyota Supra Turbo 3.0L 6cyl\u003c\/li\u003e\n\u003cli\u003e1991 Toyota Supra Turbo 3.0L 6cyl\u003c\/li\u003e\n\u003cli\u003e1992 Toyota Supra Turbo 3.0L 6cyl\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":40185526353980,"sku":"50215","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/st-suspensions-st-front-anti-sway-bar-for-1986-1992-toyota-supra-turbo-3-0l-6cyl-50215-1194428261.jpg?v=1768101193"},{"product_id":"st-suspensions-st-front-anti-sway-bar-1985-1989-toyota-mr2-1-6-4cyl","title":"ST Suspensions ST Front Anti-Sway Bar for 1985-1989 Toyota MR2 1.6L 4cyl","description":"\u003cp\u003eLooking to improve the handling of your vehicle? Our ST Anti-Sway Bars for the 1985-1989 Toyota MR2 1.6L 4cyl are the ideal solution. By upgrading the Anti-Sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-Sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-Sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-Sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip.\u003c\/p\u003e\u003cp\u003eOur high performance ST Anti-Sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.\u003c\/p\u003e\u003ch3\u003eFantastic handling\u003c\/h3\u003e\u003cp\u003eOnce fitted, ST Anti-Sway Bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behavior is a lot more direct allowing a sportier and more agile driving style.\u003c\/p\u003e\u003ch3\u003eBetter Performance\u003c\/h3\u003e\u003cp\u003eST suspension Anti-Sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles.\u003c\/p\u003e\u003ch3\u003eStandard Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.\u003c\/li\u003e\n\u003cli\u003eGreatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.\u003c\/li\u003e\n\u003cli\u003eMore direct steering behavior.\u003c\/li\u003e\n\u003cli\u003eIncreased traction.\u003c\/li\u003e\n\u003cli\u003eImprove balance by dialing out under or oversteer.\u003c\/li\u003e\n\u003cli\u003eMultiple adjustments when possible.\u003c\/li\u003e\n\u003cli\u003eHigh quality composite bushings reduce deflection and improve load transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e50220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eSway Bars \u0026amp; End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e00611512502205\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1985-1989 Toyota MR2 1.6L 4cyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar Diameter - Front\u003c\/td\u003e\n\u003ctd\u003e13\/16 in. \/ 21mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1985 Toyota MR2 1.6L 4cyl\u003c\/li\u003e\n\u003cli\u003e1986 Toyota MR2 1.6L 4cyl\u003c\/li\u003e\n\u003cli\u003e1987 Toyota MR2 1.6L 4cyl\u003c\/li\u003e\n\u003cli\u003e1988 Toyota MR2 1.6L 4cyl\u003c\/li\u003e\n\u003cli\u003e1989 Toyota MR2 1.6L 4cyl\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":40185526419516,"sku":"50220","price":339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/st-suspensions-st-front-anti-sway-bar-for-1985-1989-toyota-mr2-1-6l-4cyl-50220-1194432399.jpg?v=1768423631"},{"product_id":"st-suspensions-st-front-anti-sway-bar-1991-1995-toyota-mr2-2-0-2-2-4cyl","title":"ST Suspensions ST Front Anti-Sway Bar for 1991-1995 Toyota MR2 2.0-2.2L 4cyl","description":"\u003cp\u003eLooking to improve the handling of your vehicle? Our ST Anti-Sway Bars for the 1991-1995 Toyota MR2 2.0-2.2L 4cyl are the ideal solution. By upgrading the Anti-Sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-Sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-Sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-Sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip.\u003c\/p\u003e\u003cp\u003eOur high performance ST Anti-Sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.\u003c\/p\u003e\u003ch3\u003eFantastic handling\u003c\/h3\u003e\u003cp\u003eOnce fitted, ST Anti-Sway Bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behavior is a lot more direct allowing a sportier and more agile driving style.\u003c\/p\u003e\u003ch3\u003eBetter Performance\u003c\/h3\u003e\u003cp\u003eST suspension Anti-Sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles.\u003c\/p\u003e\u003ch3\u003eStandard Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.\u003c\/li\u003e\n\u003cli\u003eGreatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.\u003c\/li\u003e\n\u003cli\u003eMore direct steering behavior.\u003c\/li\u003e\n\u003cli\u003eIncreased traction.\u003c\/li\u003e\n\u003cli\u003eImprove balance by dialing out under or oversteer.\u003c\/li\u003e\n\u003cli\u003eMultiple adjustments when possible.\u003c\/li\u003e\n\u003cli\u003eHigh quality composite bushings reduce deflection and improve load transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e50225\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eSway Bars \u0026amp; End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e00611512502250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1991-1995 Toyota MR2 2.0-2.2L 4cyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar Diameter - Front\u003c\/td\u003e\n\u003ctd\u003e15\/16 in. \/ 24mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1991 Toyota MR2 2.0-2.2L 4cyl\u003c\/li\u003e\n\u003cli\u003e1992 Toyota MR2 2.0-2.2L 4cyl\u003c\/li\u003e\n\u003cli\u003e1993 Toyota MR2 2.0-2.2L 4cyl\u003c\/li\u003e\n\u003cli\u003e1994 Toyota MR2 2.0-2.2L 4cyl\u003c\/li\u003e\n\u003cli\u003e1995 Toyota MR2 2.0-2.2L 4cyl\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":40185526485052,"sku":"50225","price":339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/st-suspensions-st-front-anti-sway-bar-for-1991-1995-toyota-mr2-2-0-2-2l-4cyl-50225-1194432407.jpg?v=1768423898"},{"product_id":"st-suspensions-st-front-anti-sway-bar-2005-2010-scion-tc-2-4-4cyl","title":"ST Suspensions ST Front Anti-Sway Bar for 2005-2010 Scion tC 2.4L 4cyl","description":"\u003cp\u003eLooking to improve the handling of your vehicle? Our ST Anti-Sway Bars for the 2005-2010 Scion tC 2.4L 4cyl are the ideal solution. By upgrading the Anti-Sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-Sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-Sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-Sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip.\u003c\/p\u003e\u003cp\u003eOur high performance ST Anti-Sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.\u003c\/p\u003e\u003ch3\u003eFantastic handling\u003c\/h3\u003e\u003cp\u003eOnce fitted, ST Anti-Sway Bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behavior is a lot more direct allowing a sportier and more agile driving style.\u003c\/p\u003e\u003ch3\u003eBetter Performance\u003c\/h3\u003e\u003cp\u003eST suspension Anti-Sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles.\u003c\/p\u003e\u003ch3\u003eStandard Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.\u003c\/li\u003e\n\u003cli\u003eGreatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.\u003c\/li\u003e\n\u003cli\u003eMore direct steering behavior.\u003c\/li\u003e\n\u003cli\u003eIncreased traction.\u003c\/li\u003e\n\u003cli\u003eImprove balance by dialing out under or oversteer.\u003c\/li\u003e\n\u003cli\u003eMultiple adjustments when possible.\u003c\/li\u003e\n\u003cli\u003eHigh quality composite bushings reduce deflection and improve load transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e50227\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eSway Bars \u0026amp; End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e00611512502274\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2005-2010 Scion tC 2.4L 4cyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar Diameter - Front\u003c\/td\u003e\n\u003ctd\u003e15\/16 in. \/ 24mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2005 Scion tC 2.4L 4cyl\u003c\/li\u003e\n\u003cli\u003e2006 Scion tC 2.4L 4cyl\u003c\/li\u003e\n\u003cli\u003e2007 Scion tC 2.4L 4cyl\u003c\/li\u003e\n\u003cli\u003e2008 Scion tC 2.4L 4cyl\u003c\/li\u003e\n\u003cli\u003e2009 Scion tC 2.4L 4cyl\u003c\/li\u003e\n\u003cli\u003e2010 Scion tC 2.4L 4cyl\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":40185526550588,"sku":"50227","price":339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/st-suspensions-st-front-anti-sway-bar-for-2005-2010-scion-tc-2-4l-4cyl-50227-1194428103.jpg?v=1768097172"},{"product_id":"st-suspensions-st-front-anti-sway-bar-2013-2016-scion-fr-s-2-0-4cyl","title":"ST Suspensions ST Front Anti-Sway Bar for 2013-2016 Scion FR-S 2.0L 4cyl","description":"\u003cp\u003eLooking to improve the handling of your vehicle? Our ST Anti-Sway Bars for the 2013-2016 Scion FR-S 2.0L 4cyl are the ideal solution. By upgrading the Anti-Sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-Sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-Sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-Sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip.\u003c\/p\u003e\u003cp\u003eOur high performance ST Anti-Sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.\u003c\/p\u003e\u003ch3\u003eFantastic handling\u003c\/h3\u003e\u003cp\u003eOnce fitted, ST Anti-Sway Bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behavior is a lot more direct allowing a sportier and more agile driving style.\u003c\/p\u003e\u003ch3\u003eBetter Performance\u003c\/h3\u003e\u003cp\u003eST suspension Anti-Sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles.\u003c\/p\u003e\u003ch3\u003eStandard Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.\u003c\/li\u003e\n\u003cli\u003eGreatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.\u003c\/li\u003e\n\u003cli\u003eMore direct steering behavior.\u003c\/li\u003e\n\u003cli\u003eIncreased traction.\u003c\/li\u003e\n\u003cli\u003eImprove balance by dialing out under or oversteer.\u003c\/li\u003e\n\u003cli\u003eMultiple adjustments when possible.\u003c\/li\u003e\n\u003cli\u003eHigh quality composite bushings reduce deflection and improve load transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e50228\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eSway Bars \u0026amp; End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e00611512502281\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2013-2016 Scion FR-S 2.0L 4cyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eZN6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar Diameter - Front\u003c\/td\u003e\n\u003ctd\u003e3\/4 in. \/ 19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eAdjustable Anti Sway Bar at the Front Axle.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2013 Scion FR-S 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e2014 Scion FR-S 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e2015 Scion FR-S 2.0L 4cyl\u003c\/li\u003e\n\u003cli\u003e2016 Scion FR-S 2.0L 4cyl\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":40185526648892,"sku":"50228","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/st-suspensions-st-front-anti-sway-bar-for-2013-2016-scion-fr-s-2-0l-4cyl-50228-1194427791.jpg?v=1768251491"},{"product_id":"st-suspensions-st-front-anti-sway-bar-2013-2020-subaru-brz-zc6","title":"ST Suspensions ST Front Anti-Sway Bar for 2013-2020 Subaru BRZ (ZN6)","description":"\u003cp\u003eLooking to improve the handling of your vehicle? Our ST Anti-Sway Bars for the 2013-2020 Subaru BRZ (ZC6) are the ideal solution. By upgrading the Anti-Sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-Sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-Sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-Sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip.\u003c\/p\u003e\u003cp\u003eOur high performance ST Anti-Sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.\u003c\/p\u003e\u003ch3\u003eFantastic handling\u003c\/h3\u003e\u003cp\u003eOnce fitted, ST Anti-Sway Bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behavior is a lot more direct allowing a sportier and more agile driving style.\u003c\/p\u003e\u003ch3\u003eBetter Performance\u003c\/h3\u003e\u003cp\u003eST suspension Anti-Sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles.\u003c\/p\u003e\u003ch3\u003eStandard Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.\u003c\/li\u003e\n\u003cli\u003eGreatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.\u003c\/li\u003e\n\u003cli\u003eMore direct steering behavior.\u003c\/li\u003e\n\u003cli\u003eIncreased traction.\u003c\/li\u003e\n\u003cli\u003eImprove balance by dialing out under or oversteer.\u003c\/li\u003e\n\u003cli\u003eMultiple adjustments when possible.\u003c\/li\u003e\n\u003cli\u003eHigh quality composite bushings reduce deflection and improve load transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e50228\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eSway Bars \u0026amp; End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e00611512502281\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2013-2020 Subaru BRZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eZN6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar Diameter - Front\u003c\/td\u003e\n\u003ctd\u003e3\/4 in. \/ 19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eAdjustable Anti Sway Bar at the Front Axle.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2013 Subaru BRZ (ZC6)\u003c\/li\u003e\n\u003cli\u003e2014 Subaru BRZ (ZC6)\u003c\/li\u003e\n\u003cli\u003e2015 Subaru BRZ (ZC6)\u003c\/li\u003e\n\u003cli\u003e2016 Subaru BRZ (ZC6)\u003c\/li\u003e\n\u003cli\u003e2017 Subaru BRZ (ZC6)\u003c\/li\u003e\n\u003cli\u003e2018 Subaru BRZ (ZC6)\u003c\/li\u003e\n\u003cli\u003e2019 Subaru BRZ (ZC6)\u003c\/li\u003e\n\u003cli\u003e2020 Subaru BRZ (ZC6)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":40185526714428,"sku":"50228","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/st-suspensions-st-front-anti-sway-bar-for-2013-2020-subaru-brz-zn6-50228-1194432429.jpg?v=1768424498"},{"product_id":"st-suspensions-st-front-anti-sway-bar-2017-2018-toyota-86-2-0-4cyl","title":"ST Suspensions ST Front Anti-Sway Bar for 2017-2020 Toyota 86 (ZN6)","description":"\u003cp\u003eLooking to improve the handling of your vehicle? Our ST Anti-Sway Bars for the 2017-2020 Toyota 86 (ZN6) are the ideal solution. By upgrading the Anti-Sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-Sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-Sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-Sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip.\u003c\/p\u003e\u003cp\u003eOur high performance ST Anti-Sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.\u003c\/p\u003e\u003ch3\u003eFantastic handling\u003c\/h3\u003e\u003cp\u003eOnce fitted, ST Anti-Sway Bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behavior is a lot more direct allowing a sportier and more agile driving style.\u003c\/p\u003e\u003ch3\u003eBetter Performance\u003c\/h3\u003e\u003cp\u003eST suspension Anti-Sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles.\u003c\/p\u003e\u003ch3\u003eStandard Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.\u003c\/li\u003e\n\u003cli\u003eGreatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.\u003c\/li\u003e\n\u003cli\u003eMore direct steering behavior.\u003c\/li\u003e\n\u003cli\u003eIncreased traction.\u003c\/li\u003e\n\u003cli\u003eImprove balance by dialing out under or oversteer.\u003c\/li\u003e\n\u003cli\u003eMultiple adjustments when possible.\u003c\/li\u003e\n\u003cli\u003eHigh quality composite bushings reduce deflection and improve load transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e50228\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eSway Bars \u0026amp; End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e00611512502281\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2017-2020 Toyota 86\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eZN6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar Diameter - Front\u003c\/td\u003e\n\u003ctd\u003e3\/4 in. \/ 19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eAdjustable Anti Sway Bar at the Front Axle.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e2017 Toyota 86 (ZN6)\u003c\/li\u003e\n\u003cli\u003e2018 Toyota 86 (ZN6)\u003c\/li\u003e\n\u003cli\u003e2019 Toyota 86 (ZN6)\u003c\/li\u003e\n\u003cli\u003e2020 Toyota 86 (ZN6)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":40185526779964,"sku":"50228","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/st-suspensions-st-front-anti-sway-bar-for-2017-2020-toyota-86-zn6-50228-1194427787.jpg?v=1769695779"},{"product_id":"st-suspensions-st-front-anti-sway-bar-1990-1994-volkswagen-corrado-53i-1-8-4cyl-2-9vr6","title":"ST Suspensions ST Front Anti-Sway Bar for 1990-1994 Volkswagen Corrado 1.8L 4cyl 2.9L VR6","description":"\u003cp\u003eLooking to improve the handling of your vehicle? Our ST Anti-Sway Bars for the 1990-1994 Volkswagen Corrado 1.8L 4cyl 2.9L VR6 (A2) are the ideal solution. By upgrading the Anti-Sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-Sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-Sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-Sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip.\u003c\/p\u003e\u003cp\u003eOur high performance ST Anti-Sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.\u003c\/p\u003e\u003ch3\u003eFantastic handling\u003c\/h3\u003e\u003cp\u003eOnce fitted, ST Anti-Sway Bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behavior is a lot more direct allowing a sportier and more agile driving style.\u003c\/p\u003e\u003ch3\u003eBetter Performance\u003c\/h3\u003e\u003cp\u003eST suspension Anti-Sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles.\u003c\/p\u003e\u003ch3\u003eStandard Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.\u003c\/li\u003e\n\u003cli\u003eGreatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.\u003c\/li\u003e\n\u003cli\u003eMore direct steering behavior.\u003c\/li\u003e\n\u003cli\u003eIncreased traction.\u003c\/li\u003e\n\u003cli\u003eImprove balance by dialing out under or oversteer.\u003c\/li\u003e\n\u003cli\u003eMultiple adjustments when possible.\u003c\/li\u003e\n\u003cli\u003eHigh quality composite bushings reduce deflection and improve load transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e50235\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eSway Bars \u0026amp; End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e00611512502359\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1990-1994 Volkswagen Corrado 1.8L 4cyl 2.9L VR6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003eA2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar Diameter - Front\u003c\/td\u003e\n\u003ctd\u003e7\/8 in. \/ 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eAdjustable Anti Sway Bar at the Rear Axle. Anti Sway Bar only fits vehicles with original equipment Front Anti Sway Bar.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1990 Volkswagen Corrado 1.8L 4cyl 2.9L VR6 (A2)\u003c\/li\u003e\n\u003cli\u003e1991 Volkswagen Corrado 1.8L 4cyl 2.9L VR6 (A2)\u003c\/li\u003e\n\u003cli\u003e1992 Volkswagen Corrado 1.8L 4cyl 2.9L VR6 (A2)\u003c\/li\u003e\n\u003cli\u003e1993 Volkswagen Corrado 1.8L 4cyl 2.9L VR6 (A2)\u003c\/li\u003e\n\u003cli\u003e1994 Volkswagen Corrado 1.8L 4cyl 2.9L VR6 (A2)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":40185526878268,"sku":"50235","price":339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/st-suspensions-st-front-anti-sway-bar-for-1990-1994-volkswagen-corrado-1-8l-4cyl-2-9l-vr6-50235-1194432410.jpg?v=1768423930"},{"product_id":"st-suspensions-st-front-anti-sway-bar-1985-1992-volkswagen-golf-gti-ii-2wd-19e-1-6-2-0-4cyl-diesel","title":"ST Suspensions ST Front Anti-Sway Bar for 1985-1992 Volkswagen Golf\/GTI 1.6-2.0L (4cyl) MK2 (19E)","description":"\u003cp\u003eLooking to improve the handling of your vehicle? Our ST Anti-Sway Bars for the 1985-1992 Volkswagen Golf\/GTI 1.6-2.0L (4cyl) MK2 (19E) are the ideal solution. By upgrading the Anti-Sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-Sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-Sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-Sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicle's lateral stability and cornering grip.\u003c\/p\u003e\u003cp\u003eOur high performance ST Anti-Sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.\u003c\/p\u003e\u003ch3\u003eFantastic handling\u003c\/h3\u003e\u003cp\u003eOnce fitted, ST Anti-Sway Bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behavior is a lot more direct allowing a sportier and more agile driving style.\u003c\/p\u003e\u003ch3\u003eBetter Performance\u003c\/h3\u003e\u003cp\u003eST suspension Anti-Sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles.\u003c\/p\u003e\u003ch3\u003eStandard Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high quality spring steel and finished with a durable powder coating for a long lasting finish.\u003c\/li\u003e\n\u003cli\u003eGreatly improve handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside tires.\u003c\/li\u003e\n\u003cli\u003eMore direct steering behavior.\u003c\/li\u003e\n\u003cli\u003eIncreased traction.\u003c\/li\u003e\n\u003cli\u003eImprove balance by dialing out under or oversteer.\u003c\/li\u003e\n\u003cli\u003eMultiple adjustments when possible.\u003c\/li\u003e\n\u003cli\u003eHigh quality composite bushings reduce deflection and improve load transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ctable class=\"table table-striped table-primary\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e50235\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Name\u003c\/td\u003e\n\u003ctd\u003eSway Bars \u0026amp; End Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e00611512502359\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e1985-1992 Volkswagen Golf\/GTI 1.6-2.0L (4cyl) MK2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis Code\u003c\/td\u003e\n\u003ctd\u003e19E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eFWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar Diameter - Front\u003c\/td\u003e\n\u003ctd\u003e7\/8 in. \/ 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotes\u003c\/td\u003e\n\u003ctd\u003eAdjustable Anti Sway Bar at the Rear Axle. Anti Sway Bar only fits vehicles with original equipment Front Anti Sway Bar.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eVehicle Fitment\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1985 Volkswagen Golf\/GTI 1.6-2.0L (4cyl) MK2 (19E)\u003c\/li\u003e\n\u003cli\u003e1986 Volkswagen Golf\/GTI 1.6-2.0L (4cyl) MK2 (19E)\u003c\/li\u003e\n\u003cli\u003e1987 Volkswagen Golf\/GTI 1.6-2.0L (4cyl) MK2 (19E)\u003c\/li\u003e\n\u003cli\u003e1988 Volkswagen Golf\/GTI 1.6-2.0L (4cyl) MK2 (19E)\u003c\/li\u003e\n\u003cli\u003e1989 Volkswagen Golf\/GTI 1.6-2.0L (4cyl) MK2 (19E)\u003c\/li\u003e\n\u003cli\u003e1990 Volkswagen Golf\/GTI 1.6-2.0L (4cyl) MK2 (19E)\u003c\/li\u003e\n\u003cli\u003e1991 Volkswagen Golf\/GTI 1.6-2.0L (4cyl) MK2 (19E)\u003c\/li\u003e\n\u003cli\u003e1992 Volkswagen Golf\/GTI 1.6-2.0L (4cyl) MK2 (19E)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ST Suspensions","offers":[{"title":"Default Title","offer_id":40185526976572,"sku":"50235","price":339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0000\/2183\/products\/st-suspensions-st-front-anti-sway-bar-for-1985-1992-volkswagen-golf-gti-1-6-2-0l-4cyl-mk2-19e-50235-1194432398.jpg?v=1768423659"}],"url":"https:\/\/www.springrates.com\/collections\/chassis-reinforcement.oembed?page=4","provider":"SPRINGRATES","version":"1.0","type":"link"}